[align=left]Simple inductor circuits work well in low impedance circuits, with an attenuation of more than 40dB, but may not work at all in high impedance circuits. [/align] [align=left]Circuits with ...
I have been debugging the SGMII interface recently and would like to share some experience.
The project background is that there is a switch chip, which, in addition to the built-in phy, also reserves...
Send different instructions to the slave, and the slave will perform different operations. This is just to judge the function code, which is similar to the practical serial port routine we learned ear...
Telecom in three places quietly promotes IPTV bidding 2006-8-3Although conflicts of interest between different departments and systems have hampered the development of IPTV (interactive Internet telev...
Most of the pins on the MSP430 microcontroller are grouped into up to 8 ports, P1 through P8. Each port is 8 bits wide and has 8 associated I/O pins. These pins are directly mapped to the correspondin...
Today, the following error occurred when using vivado to develop ZYNQ:
ODDR_has_invalid_load: ODDR cell xxxx loads should only be an output buffer or a port, but it is driving an invalid load (one or ...