WSC, WSN
www.vishay.com
Vishay Dale
Wirewound Resistors, Precision Power, Surface Mount
FEATURES
• All welded construction
• Molded encapsulation
• Wraparound terminations
• Excellent stability at different environmental
conditions
• High power ratings (up to 3 W)
• Superior surge capability
• Available in non-inductive styles with Ayrton-
Perry winding (WSN in lieu of WSC, maximum
resistance is one-half WSC range)
• AEC-Q200 qualified
(1)
Available
Available
Available
LINKS TO ADDITIONAL RESOURCES
D
D
3
3
3D Models
Available
• Material categorization: for definitions of compliance
please see
www.vishay.com/doc?99912
Notes
• This datasheet provides information about parts that are RoHS-compliant and / or parts that are non-RoHS-compliant. For example, parts
with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details
• Follow link to Overview of Automotive Grade Products for more details:
www.vishay.com/doc?49924
(1)
Flame retardance test may not be applicable to some resistor technologies
STANDARD ELECTRICAL SPECIFICATIONS
GLOBAL
MODEL
WSC01/2
WSC0001
(2)
WSC2515
WSC0002
WSC4527
WSC6927
HISTORICAL
POWER RATING
P
70 °C
RESISTANCE RANGE TOLERANCE WEIGHT (typical)
SIZE
MODEL
W
±%
g/1000 pieces ENCAPSULATION
WSC-1/2
WSC-1
WSC2515
WSC-2
WSC4527
WSC6927
2012
2515
2515
4527
4527
6927
0.5
1
1
2
2
3
0.1 to 4.99
0.1 to 2.77K
0.1 to 2.5K
0.1 to 4.92K
0.1 to 4.92K
0.1 to 8K
0.5, 1, 5
0.5, 1, 5
0.5, 1, 5
0.5, 1, 5
0.5, 1, 5
0.5, 1, 5
90
165
165
760
760
1675
Epoxy
Thermoplastic
(1)
Thermoplastic
Thermoplastic
(1)
Thermoplastic
Thermoplastic
Notes
• Part marking: 1/2 W - DALE, value; 1 W - model, value, tolerance, date code; 2 W and 3 W - DALE, model, value, tolerance, date code
(1)
As of 1/1/2010, the WSC0001 and WSC0002 are molded with thermoplastic in lieu of epoxy. Reference PCN-DR-002-2009 and PCN-DR-003-2009
(2)
As of February 19, 2016, the WSC0001 was obsoleted by PCN-DR-013-2015; the WSC2515 is a drop-in replacement. You may contact your sales
representative or submit an inquiry via
ww2bresistors@vishay.com
for supporting information
TECHNICAL SPECIFICATIONS
PARAMETER
UNIT
WSC01/2
WSC2515
WSC0002
WSC4527, WSC6927
± 20 = 10
and above;
± 20 = 26.51
and above;
± 20 = 10.0
and above;
± 50 = 1.0
to 9.9
;
± 50 = 1.0
to 26.5
;
± 50 = 1.0
to 9.9
;
± 90 = 0.31
to 0.99
± 90 = 0.31
to 0.99
± 90 = 0.1
to 0.99
± 150 = 0.1
to 0.3
± 150 = 0.1
to 0.3
> 500
> 10
9
-65 to +175
(P x R)
1/2
-65 to +175
Temperature
± 50 = 1.0
to 4.99
coefficient measured
ppm/°C
± 90 = 0.1
to 0.99
from -55 °C to +150 °C
Dielectric
withstanding voltage
Insulation resistance
Operating
temperature range
Maximum
working voltage
V
AC
°C
V
Revision: 07-Sep-2021
Document Number: 30102
1
For technical questions, contact:
ww2bresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
WSC, WSN
www.vishay.com
Vishay Dale
GLOBAL PART NUMBER INFORMATION
Global Part Numbering Example: WSC2515R7000FEA
(visit
www.vishay.net
Vishay Dale parts numbering manual for all options)
W
S
C
2
SIZE
01/2
2515
0002
4527
6927
5
1
5
R
7
0
0
0
F
E
A
SPECIAL
(dash number)
(up to 2 digits)
from
1 to 99
as applicable
GLOBAL MODEL
WSC
WSN
VALUE
(1)
R
= decimal
K
= thousand
R7000
= 0.70
1K500
= 1.5 k
TOLERANCE
D
= ± 0.5 %
F
= ± 1.0 %
G
= ± 2.0 %
H
= ± 3.0 %
J
= ± 5.0 %
K
= ± 10 %
PACKAGING
EA
= lead (Pb)-free, tape / reel
EK
= lead (Pb)-free, bulk
TA
= tin / lead, tape / reel (R86)
BA
= tin / lead, bulk (B43)
Notes
(1)
WSC / WSN marking (www.vishay.com/doc?30327)
• Packaging code: EB (lead (Pb)-free) and TB (tin / lead) are non-standard packaging codes designating 1000 piece reels. These non-standard
packaging codes are identical to our standard EA (lead (Pb)-free) and TA (tin / lead), except that they have a package quantity of 1000 pieces
DIMENSIONS
in inches (millimeters)
W
H
L
W
1
a
T
L
b
GLOBAL
MODEL
WSC01/2
WSC2515
WSC0002
WSC4527
WSC6927
L
0.200 ± 0.020
(5.08 ± 0.508)
0.250 ± 0.020
(6.35 ± 0.508)
0.455 ± 0.020
(11.56 ± 0.508)
0.455 ± 0.020
(11.56 ± 0.508)
0.690 ± 0.032
(17.53 ± 0.813)
H
0.096 ± 0.015
(2.44 ± 0.381)
0.110 ± 0.015
(2.79 ± 0.381)
0.167 ± 0.010
(4.24 ± 0.254)
0.167 ± 0.010
(4.24 ± 0.254)
0.280 ± 0.015
(7.11 ± 0.381)
DIMENSIONS
T
0.040 ± 0.010
(1.02 ± 0.254)
0.045 ± 0.010
(1.14 ± 0.254)
0.100 ± 0.010
(2.54 ± 0.254)
0.100 ± 0.010
(2.54 ± 0.254)
0.100 ± 0.010
(2.54 ± 0.254)
W
0.125 ± 0.005
(3.18 ± 0.127)
0.150 ± 0.005
(3.81 ± 0.127)
0.275 ± 0.005
(6.98 ± 0.127)
0.275 ± 0.005
(6.98 ± 0.127)
0.275 ± 0.005
(6.98 ± 0.127)
W
1
0.050 ± 0.010
(1.27 ± 0.254)
0.098 ± 0.010
(2.49 ± 0.254)
0.215 ± 0.005
(5.46 ± 0.127)
0.215 ± 0.005
(5.46 ± 0.127)
0.215 ± 0.015
(5.46 ± 0.381)
SOLDER PAD DIMENSIONS
a
b
L
0.085 (2.16)
0.090 (2.29)
0.155 (3.94)
0.155 (3.94)
0.155 (3.94)
0.070 (1.78)
0.115 (2.92)
0.230 (5.84)
0.230 (5.84)
0.235 (5.97)
0.080 (2.03)
0.120 (3.05)
0.205 (5.21)
0.205 (5.21)
0.470 (11.94)
Notes
• 3D models available:
www.vishay.com/doc?30328
• Surface mount solder profile recommendations:
www.vishay.com/doc?31052
• Refer to WSC, WSN conversion guide for detailed construction drawings:
www.vishay.com/doc?49616
• For WSC2515 0.5 % tolerance parts, W
1
terminal dimension will be 0.090" ± 0.015"
TEMPERATURE RISE
Temperature Rise in °C
200
WSC0002
WSC4527
WSC01/2
WSC2515
100
DERATING
Rated Power in %
120
100
80
60
40
150
WSC6927
50
20
0
0
0.5
1.0
1.5
2.0
2.5
3.0
Power in W
0
-65
-25
25
75
70
125
175
225
275
Ambient Temperature in °C
Revision: 07-Sep-2021
Document Number: 30102
2
For technical questions, contact:
ww2bresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
WSC, WSN
www.vishay.com
PULSE CAPABILITY
click to get started
Vishay Dale
VE
TI
A
TR
U
S
LL
I
S
S
E
O
RP
PU
Y
NL
O
www.vishay.com/resistors/SMD-wirewound-pulse-capability-calculator/
Note
• Pulse capability increases based on the amount of wire for the resistance value and construction. The WSC0002 has greater pulse capability
than WSC4527 due to differences in internal construction. The non-inductive WSN has greater pulse capability for the same size WSC
because the second layer of wire increases the wire mass available to withstand pulse energy without exceeding temperature limits.
Follow pulse graphic link for more information regarding capability
PERFORMANCE
TEST
Thermal shock
Short time overload
Low temperature storage
High temperature exposure
Bias humidity
Mechanical shock
Vibration
Load life
Resistance to solder heat
5 x rated power for 5 s
-65 °C for 24 h
1000 h at +175 °C
+85 °C, 85 % RH, 10 % bias, 1000 h
100
g’s
for 6 ms, 5 pulses
Frequency varied 10 Hz to 500 Hz in 1 min, 3 directions, 9 h
1000 h at rated power, +70 °C, 1.5 h “ON”, 0.5 h “OFF”
+260 °C solder, 10 s to 12 s dwell, 25 mm/s emergence
CONDITIONS OF TEST
-55 °C to +150 °C, 1000 cycles, 15 min at each extreme
TEST LIMITS
± 0.5 % + 0.05
± 0.2 % + 0.05
± 0.2 % + 0.05
± 0.5 % + 0.05
± 0.2 % + 0.05
± 0.1 % + 0.05
± 0.1 % + 0.05
± 1.0 % + 0.05
± 0.5 % + 0.05
PACKAGING
MODEL
WSC01/2
WSC2515
WSC0002, WSC4527
WSC6927
REEL
TAPE WIDTH
12 mm / embossed plastic
16 mm / embossed plastic
24 mm / embossed plastic
32 mm / embossed plastic
DIAMETER
330 mm / 13"
330 mm / 13"
330 mm / 13"
330 mm / 13”
PIECES/REEL
2000
2000
1200
725
CODE
EA / TA
EA / TA
EA / TA
EA / TA
Notes
• Embossed carrier tape per EIA-481
• Additional packaging details at
www.vishay.com/doc?20051
Revision: 07-Sep-2021
Document Number: 30102
3
For technical questions, contact:
ww2bresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 09-Jul-2021
1
Document Number: 91000
MEMS sensors
京公网安备 11010802033920号
EEWORLD
