IP Rating............................................................. IP 40 ..................................................................... IP 40
*RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.
Model 97 & 99
-
5/8 ” Square Single-Turn Panel Control with Rotary Switch
Starting ........................................................................................................................................... 0.3 max. above average running torque
Running Torque
Single or Dual Section (A & R Bushings)...................................................................................................0.21 to 1.06 N-cm (0.3 to 1.5 oz.-in.)
Single or Dual Section (C & U Bushings) ..................................................................................................0.14 to 1.06 N-cm (0.2 to 1.5 oz.-in.)
Mounting .............................................................................................................................................. 1.7-2.0 N-m (15-18 lb.-in.) maximum
Variation .......................................................................................................................0.35 N-cm (0.5 oz.-in.) maximum in 45 ° shaft travel
Weight (Single Section, Metal Bushing) .............................................................................................................................. 12.7 grams nominal
Terminals .................................................................................................................................. Printed circuit terminals, J-Hooks or solder lugs
Soldering Condition .............................................Recommended hand soldering using Sn95/Ag5 no clean solder, 0.025 ” wire diameter.
Maximum temperature 399 °C (750 °F) for 3 seconds. No wash process to be used with no clean flux.
Marking....................................................................................Manufacturer’s trademark, date code, resistance, manufacturer’s part number
Ganging (Multiple Section Potentiometers) ..............................................................................................................................2 cups maximum
Hardware..................... One lockwasher and one mounting nut is shipped with each potentiometer, except where noted in the part number.
NOTE:
1
At
Performance specifications do not apply to units subjected to printed circuit board cleaning procedures.
room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.
Model 97 & 99
-
5/8 ” Square Single-Turn Panel Control with Rotary Switch
Rotary Switch Specifications
Initial Electrical Characteristics
1
Contacts:
DPST ........................................................................................................................................................ N.O/N.O., N.C./N.C. or N.O./N.C.
DPDT ......................................................................................................................................................... 2 N.O./N.C. (break before make)
Power Rating (Resistive Load):
DPST .................................................................................... 2 A @ 125 volts RMS-60 Hz or 2 A @ 28 VDC, 1 A @ 250 volts RMS-60 Hz
DPDT ....................................................................................................................................1 A @ 125 volts RMS-60 Hz or 1 A @ 28 VDC
Operating Temperature Range .....................................................................................................................................................0 °C to +70 °C
Exposure Temperature Range ................................................................................................................................................ -65 °C to +125 °C
Vibration (Dual Section) ................................................................................................................................................................................. 8 G
Contact Resistance ................................................................................................................................................... 10 milliohms maximum
Contact Bounce ..................................................................................................................................................... 0.1 millisecond maximum
Shock (Dual Section) ................................................................................................................................................................................... 20 G
Contact Resistance ................................................................................................................................................... 10 milliohms maximum
Contact Bounce ..................................................................................................................................................... 0.1 millisecond maximum
Rotational Life ................................................................................................................................................................................25,000 cycles
Switch Actuating Torque (50% Duty cycle @ Rated Power Load) ............................................................1.41 to 4.94 N-cm (2 to 7 oz.-in.)
Contact Resistance .................................................................................................................................................100 milliohms maximum
Moisture Resistance (MIL-STD-202, Method 106, Condition B)
Contact Resistance (0.1 VDC-10 mA) ...................................................................................................................... 10 milliohms maximum
Housing Material ........................................................................................................High temperature, flame retardant, thermosetting plastic
Mechanical Characteristics
1
Actuating Torque (Each Section, Switch Module Only) ...............................................................................3.53 to 10.59 N-cm (5 to 15 oz.-in.)
Running Torque (Out of Detent, 2-4 Module Assembly)...............................................................................0.21 to 1.41 N-cm (0.3 to 2 oz.-in.)
Detent ................................................................................................................................................................................CW or CCW standard
Contact Materials .................................................................................................................................................... Fine silver with gold overlay
Terminal Styles ............................................................................................................................................................................. Solder lug only
Standard Orientation ......................................................................................................................................... In-line with control terminals
Optional .....................................................................................................................................................Rotated 90 ° CCW from standard
Terminal Strength (Before and After Soldering Heat Exposure) ................................................................................... 0.9 kg (2 lbs.) minimum
NOTE:
1
At
Performance specifications do not apply to units subjected to printed circuit board cleaning procedures.
room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.
Model 97 & 99
-
5/8 ” Square Single-Turn Panel Control with Rotary Switch
Product Dimensions
Model 97 PC Pin Terminals, “L” Pattern
MOUNTING
SURFACE
L
12.70 ± .229
(.500 ± .009)
0.79 ± .025
(.031 ± .010)
DIA.
13.72 ± 0.38
(.540 ± .015)
1.37 ± 0.08
(.054 ± .003)
2.36 ± 0.08
(.093 ± .003)
15.88
(.625)
7.92
(.312)
SEE
HOW TO ORDER
CHART FOR
BUSHING OPTIONS.
DIA.
0.81
TYP.
(.032)
5.08 ± 0.38
(.200 ± .015)
11.05 ± 0.20
(.435 ± .008)
R1
1.19
(.047)
“A” STYLE
A.R. LUG
R
9.53
(.375)
12.7 ± 1.02
(.500 ± .040)
2.54
(.100)
2.54
(.100)
0.76 ± 0.05
(.030 ± .002)
TYP.
1
3
2
SEE
NEXT PAGE
FOR SHAFT
OPTIONS.
Model 99 Solder Lug Terminals, "Triangular" Pattern
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.
2
Model 97 & 99
-
5/8 ” Square Single-Turn Panel Control with Rotary Switch
Product Dimensions
Model 97
(2nd Cup - Switch)
MOUNTING
SURFACE
L
2.77 ± .38
(.109 ± .015)
15.88
(.625)
REF.
Horizontal Term.
(Switch Types R57, R59)
18.42 ± 0.38
(.725 ± .015)
15.88
(.625)
3
1
3
4
5
6
2
1
16.89 ± .51
(.665 ± .020)
8.74 ± 0.25
(.344 ± .010)
2.54
(.100)
4 5
2.41 X 1.14 SLOT 6 PLCS
(.095 X .045)
2.29
6 PLCS.
(.090)
2.54 ± 0.25
2 PLCS.
(.100 ± .010)
6 2
15.88 ± 0.38
(.625 ± .015)
2 PLCS.
2.77 ± .38
(.109 ± .015)
8.26 ± 0.25
(.325 ± .010)
Model 99
(2nd Cup - Switch)
MOUNTING
SURFACE
2.77 ± .38
(.109 ± .015)
24.77 ± .51
(.975 ± .020)
15.88
(.625)
REF.
Switch Module Variations
Shaft Flat Orientation
120 ° ± 5 ° STD.
FLAT ORIENTATION
(SHAFT AT CCW END)
1
CCW
2
POTENTIOMETER
3
3
L
1
TOTAL ROTATION 300 °
5.59 ± .38
(.022 ± .015)
16.89 ± .51
(.665 ± .020)
2.41 X 1.14
SLOT 6 PLCS
(.095 X .045)
CCW DETENT
25 ° MAX.
ACTUATION
ANGLE
(TYPES 51,
53, 57, 59)
CW DETENT
25 ° MAX.
ACTUATION ANGLE
(TYPES 50, 52)
4 5
6
2
NOTE: Switch terminals shown in vertical position.
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.
The power MOSFET of the switching power supply is installed on the circuit board. Due to the stray capacitance and parasitic inductance of the MOSFET routing and loop on the circuit board, the higher ...
The SimpleLink low energy BluetoothCC2640R2F-Q1 device is an AEC-Q100 qualified wireless microcontroller (MCU) for low energy Bluetooth 4.2 and 5 automotive applications such as passive entry/passive ...
*Use the multiplex timing of Timer_A comparison mode to make the LED flashAfter consulting the information, we found out that :
MSP430 has two types of timers: Timer_A (3)Timer_B (1) .Each timer is eq...
In the field of smart health, wearable intelligence has shown a wide range of application scenarios, and has effectively promoted the progress of disease prevention and health management through me...[Details]
The example of a flyback converter is used to explain the calculation of output capacitance. This example is an RCC topology with an output power of 6W, an output voltage of 5V, and an output volta...[Details]
0 Introduction
The microcontroller course is a required professional course for electronic and electrical majors and electromechanical majors. This course requires students to learn both the ha...[Details]
This paper introduces a specific method of designing a short-distance wireless data transmission system using a high-performance, low-power 32-bit microprocessor STM32F103 and a RF transceiver chip...[Details]
Soft starters and frequency converters are two different electrical devices that have different characteristics and performance when starting motors. This article will introduce the starting torque...[Details]
On January 27, the Funeng Power Semiconductor Project rolled off the production line. According to Dazhong Daily, this marked the entry of Shandong's first chip processing and manufacturing line into...[Details]
When I was learning about 51 MCU interrupts, I was often confused by external interrupts, timers/counters, and serial ports. I was originally a primary school student, how could I stand the torture! ...[Details]
At the 2019 World Artificial Intelligence Conference, Li Meng, Vice Minister of the Ministry of Science and Technology, announced a new batch of national artificial intelligence open innovation platf...[Details]
Apple CEO Tim Cook received a total of $98.7 million in base salary, stock and other compensation, according to a statement the company filed with the U.S. Securities and Exchange Commission today. ...[Details]
Integrated Circuit Basics and Applications
Integrated circuits are divided into two major categories: analog and digital, according to their different functional uses. The speci...[Details]
On April 23, Mijia’s official Weibo account announced that the new art co-branded Xiaomi Watch Color will be unveiled tomorrow, this time in collaboration with a world-renowned art brand. This...[Details]
1. Introduction
As the core equipment of converter steelmaking, the safe, efficient and stable operation of the primary extraction fan is related to whether the entire steelmaking system i...[Details]
SVPWM: Space Vector Pulse Width Modulation
Why use SVPWM to control the motor? The traditional six-step commutation control method makes the inverter output change in a square wave. The rotati...[Details]
When I used Keil to write 51 MCU programs, I often used the printf function to print out some key process data to the computer to monitor the running status of the program. Recently, when I used IAR f...[Details]