IP Rating............................................................. IP 40 .....................................................................IP 40
*RoHS Directive 2002/95/EC Jan 27, 2003 including Annex.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
Model 97 & 99
-
5/8 ” Square Single-Turn Panel Control with Rotary Switch
Potentiometer Specifications
Mechanical Characteristics
1
Stop Strength (1/4 ” D shaft) .............................................................................................................................................45.19 N-cm (4 lb.-in.)
(1/8 ” D shaft) .............................................................................................................................................33.89 N-cm (3 lb.-in.)
Starting ........................................................................................................................................... 0.3 max. above average running torque
Running Torque
Single or Dual Section (A & R Bushings) .................................................................................................. 0.21 to 1.06 N-cm (0.3 to 1.5 oz.-in.)
Single or Dual Section (C & U Bushings) .................................................................................................. 0.14 to 1.06 N-cm (0.2 to 1.5 oz.-in.)
Mounting .............................................................................................................................................1.7-2.0 N-m (15-18 lb.-in.) maximum
Variation ...................................................................................................................... 0.35 N-cm (0.5 oz.-in.) maximum in 45 ° shaft travel
Weight (Single Section, Metal Bushing)...............................................................................................................................12.7 grams nominal
Terminals .................................................................................................................................Printed circuit terminals, J-Hooks or solder lugs
Soldering Condition ...........................................Recommended hand soldering using Sn95/Ag5 no clean solder, 0.025 ” wire diameter.
Maximum temperature 399 °C (750 °F) for 3 seconds. No wash process to be used with no clean flux.
Marking ..................................................................................Manufacturer’s trademark, date code, resistance, manufacturer’s part number
Ganging (Multiple Section Potentiometers).............................................................................................................................2 cups maximum
Hardware ...................One lockwasher and one mounting nut is shipped with each potentiometer, except where noted in the part number.
NOTE:
1
At
Performance specifications do not apply to units subjected to printed circuit board cleaning procedures.
room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
Model 97 & 99
-
5/8 ” Square Single-Turn Panel Control with Rotary Switch
Rotary Switch Specifications
Initial Electrical Characteristics
1
Contacts:
DPST ........................................................................................................................................................N.O/N.O., N.C./N.C. or N.O./N.C.
DPDT ..........................................................................................................................................................2 N.O./N.C. (break before make)
Power Rating (Resistive Load):
DPST ..................................................................................... 2 A @ 125 volts RMS-60 Hz or 2 A @ 28 VDC, 1 A @ 250 volts RMS-60 Hz
DPDT .....................................................................................................................................1 A @ 125 volts RMS-60 Hz or 1 A @ 28 VDC
Contact Bounce ...........................................................................................................................................................5 milliseconds maximum
Dielectric Withstanding Voltage (MIL-STD-202, Method 301)
Operating Temperature Range .................................................................................................................................................... 0 °C to +70 °C
Exposure Temperature Range ................................................................................................................................................-65 °C to +125 °C
Vibration (Dual Section).................................................................................................................................................................................. 8 G
Contact Resistance .................................................................................................................................................. 10 milliohms maximum
Contact Bounce ................................................................................................................................................... 0.1 millisecond maximum
Shock (Dual Section).................................................................................................................................................................................... 20 G
Contact Resistance .................................................................................................................................................. 10 milliohms maximum
Contact Bounce ................................................................................................................................................... 0.1 millisecond maximum
Rotational Life ................................................................................................................................................................................25,000 cycles
Switch Actuating Torque (50% Duty cycle @ Rated Power Load) ........................................................... 1.41 to 4.94 N-cm (2 to 7 oz.-in.)
Contact Resistance ................................................................................................................................................ 100 milliohms maximum
Moisture Resistance (MIL-STD-202, Method 106, Condition B)
Contact Resistance (0.1 VDC-10 mA) ..................................................................................................................... 10 milliohms maximum
Housing Material .......................................................................................................High temperature, flame retardant, thermosetting plastic
Mechanical Characteristics
1
Actuating Torque (Each Section, Switch Module Only).............................................................................. 3.53 to 10.59 N-cm (5 to 15 oz.-in.)
Running Torque (Out of Detent, 2-4 Module Assembly) ............................................................................. 0.21 to 1.41 N-cm (0.3 to 2 oz.-in.)
Detent ................................................................................................................................................................................CW or CCW standard
Contact Materials.................................................................................................................................................... Fine silver with gold overlay
Terminal Styles .............................................................................................................................................................................Solder lug only
Standard Orientation ........................................................................................................................................ In-line with control terminals
Optional ....................................................................................................................................................Rotated 90 ° CCW from standard
Terminal Strength (Before and After Soldering Heat Exposure) .................................................................................... 0.9 kg (2 lbs.) minimum
NOTE:
1
At
Performance specifications do not apply to units subjected to printed circuit board cleaning procedures.
room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
Model 97 & 99
-
5/8 ” Square Single-Turn Panel Control with Rotary Switch
Product Dimensions
Model 97 PC Pin Terminals, “L” Pattern
MOUNTING
SURFACE
L
12.70 ± .229
(.500 ± .009)
0.79 ± .025
(.031 ± .010)
DIA.
13.72 ± 0.38
(.540 ± .015)
1.37 ± 0.08
(.054 ± .003)
2.36 ± 0.08
(.093 ± .003)
15.88
(.625)
7.92
(.312)
SEE
HOW TO ORDER
CHART FOR
BUSHING OPTIONS.
DIA.
0.81
TYP.
(.032)
5.08 ± 0.38
(.200 ± .015)
11.05 ± 0.20
(.435 ± .008)
R1
1.19
(.047)
“A” STYLE
A.R. LUG
R
9.53
(.375)
12.7 ± 1.02
(.500 ± .040)
2.54
(.100)
2.54
(.100)
0.76 ± 0.05
(.030 ± .002)
TYP.
1
3
2
SEE
NEXT PAGE
FOR SHAFT
OPTIONS.
Model 99 Solder Lug Terminals, "Triangular" Pattern
[i=s]This post was last edited by jinglixixi on 2021-9-17 11:29[/i]Previously, we have introduced the detection effect of capacitive-contactless liquid level sensors on different container materials. ...
Headhunting Position [Shanghai] Job Responsibilities: 1. Responsible for bringup and system optimization of product development boards; 2. Based on TI embedded Soc chip BSP and driver porting and deve...
1. Code ArchitectureThe overall code project of the flight control consists of 8 working groups, namely Ctrl, Driver, VL53L1X, STM32_LIB, USB, USB/Lib, StartUP and Drv_Point, as shown in the figure be...
At present, the application of headphone ANC is becoming more and more popular; the design of ANC involves many disciplines, such as hardware, acoustics, materials, algorithms, and testing. The princi...
0 Introduction
With the rapid development of microelectronics and information technology, digital technology represented by single-chip microcomputers is developing rapidly. Single-chip microcompute...[Details]
1. Rated impedance and impedance characteristics The rated impedance of a speaker system is generally determined by the rated impedance of the speaker unit used. The impedance characteristics of a spe...[Details]
Line follower is one of the popular robotics projects among students and beginners because of its simplicity. It follows a line, either black or white, depending on how you program your microcontro...[Details]
Today, many friends have already used active noise reduction headphones, especially when taking a train or plane, which can make the noisy environment relatively quieter.
Active noise-cancelin...[Details]
Let us analyze the situation during the shutdown period of the control switch K.
During Toff, the control switch K is turned off, and the current flowing through the primary coil of the transf...[Details]
A voltmeter is an instrument for measuring voltage. The commonly used voltmeter symbol is V. There is a permanent magnet inside the sensitive galvanometer. A coil made of a wire is connected in s...[Details]
The 1.5MW/3.2MWh distributed energy storage power station project undertaken by Jiangsu Beiren was successfully put into operation.
The project is located in a park in Suzhou and uses the 215K...[Details]
The registers for setting GPIO include: output register (ODR), input register (IDR), direction register (DDR), control register 1 (CR1) and control register 2 (CR2). The latter three register groups ...[Details]
On October 19, Xiaomi Smart Life announced that it will release a new Xiaomi Watch Color at 10 am tomorrow. The copy reads, "Are you often troubled by dizziness and shortness of breath? Worri...[Details]
Jiwei.com reported on March 14 that according to the latest information from Tianyancha, Hubble Technology Investment Co., Ltd. recently invested in a company called Beijing Yundao Intelligent Manufa...[Details]
Coating thickness gauge usage and tips: When using the coating wave thickness gauge, pay attention to the instrument's operating steps and usage tips, which can greatly increase the coating thickness...[Details]
The principle of magnetic induction is to use the magnetic flux of the probe flowing through the non-ferromagnetic coating and into the iron substrate to measure the coating thickness. The thick...[Details]
Orifice flowmeters often deform during use, which can cause the instrument to not measure accurately. Deformed orifices are often large-caliber orifice flowmeters, and the temperature of the measured ...[Details]
Research firm IDC released its forecast for the global smartphone market on May 26. The report shows that global smartphone shipments are expected to reach 1.38 billion units in 2021, a year-o...[Details]
A multimeter is a common measuring tool used by electricians. It can be used to measure parameters such as voltage, current, and resistance. A soft starter is a device used to start a motor. It can...[Details]
Sensor
京公网安备 11010802033920号
EEWORLD
