The UART port of MSP432 is directly connected to the debugger:In fact, we can directly use the USB port of the debugger as a serial port, using P1.2 and P1.3, and no additional wiring is required, whi...
I haven't measured the actual power consumption, but it ran out of power in 6 hours with a 400mah battery. That's a bit fast. Is there any way to solve this?
The code is as follows:from machine import...
In the latest update, STM32 allows pyb, uos, utime, machine and onewire modules to be configurable. This is enabled by default, but can be configured in mpconfigboard.h through the following definitio...
[i=s]This post was last edited by qwqwqw2088 on 2020-2-11 09:25[/i]1. How to find the right chip reference design and application guide?
Search the chip model on TI's official website and you will be ...
TGF4042 has the function of a noise generator. The manual states that its noise bandwidth is 62.5MHZSet the function generator to noise mode and set it to 200mvPP
Observe the noise and spectrum... Usi...