Q SERIES Ø16mm (.630") Panel Mount LED Indicators
Distinctive features and specification
VOYC1603R1US
Features
• 16mm panel mounting LED indicator
• 10mm colored diffused epoxy lens or 10mm water clear super bright LEDs
• Plated brass bezel finished in bright chrome,
black chrome or satin grey and moulded polycarbonate rear body
• Secret until lit polycarbonate decals or custom engraving
• Prominent and flush bezel styles
• 2VDC – 220VAC
• (2.8 x 0.8) solder lug/faston terminals, pins or (200mm long) wire terminations
• IP67 sealing option (EN60529)
• Supplied with fixing nut and spring washer
NB: UL Recognized Component
TECHNICAL SPECIFICATIONS
Voltage
02 (No Resistor)
6VDC
12VDC
24VDC
28VDC
110VAC
220VAC
Operating Voltage
(Min to Max)
1.8 to 3.3VDC
5.4 to 6.6VDC
10.8 to 13.2VDC
21.6 to 26.4VDC
25.2 to 30.8VDC
99 to 121VAC
207 to 253VAC
Operating Current
(Typical All Types)
20mA max*
20mA
20mA
20mA
20mA
6mA
3mA
Max Reverse Voltage:
5V
Viewing Angle:
30–100°
(dependant on model)
Life Expectancy:
100,000 hours
Temperature Range:
–40 to +85°C
(operating & storage)
Torque:
75cNm
Ø 16.00 +0.15/-0.0
19,00 0,748
AF
2,40 0,094
PANEL CUTOUT
M16 x 1,0 THREAD
Standard LED Intensity
Prominent
Flush
Forward Voltage
HE Red
80mcd
10mcd
2.0V
Green
60mcd
5mcd
2.2V
Yellow
50mcd
4mcd
2.1V
Blue
540mcd
100mcd
3.3V
White
1000mcd
150mcd
3.3V
Orange
80mcd
200mcd
2.0V
Bi-color (Typical) (Red/Green)
15/15mcd
10/10mcd
2.0V/2.2V
Tri-color (Typical) (Red/Green/Yellow)
60/50/50mcd
15/30/30mcd
2.0V/2.2V/2.1V
Bi-color - The color is changed by reversing the polarity of the supply voltage.
Tri-color - The indicator has red and green LEDs, when both connected yellow is produced.
Super Bright LED
HE Red
Green
Yellow
Blue
White
Orange
Hyper Bright LED
HE Red
Green
Yellow
Orange
Prominent
17,000mcd
11,000mcd
4,000mcd
2,500mcd
4,400mcd
2,800mcd
Prominent
2,800mcd
2,200mcd
1,300mcd
850mcd
Flush
2000mcd
680mcd
350mcd
250mcd
250mcd
300mcd
Flush
800mcd
250mcd
250mcd
200mcd
Forward Voltage
2.2V
3.5V
2.3V
3.3V
3.3V
2.1V
Forward Voltage
2.1V
3.2V
2.0V
2.1V
Luminous intensity will be reduced with lower operating current.
Note: The operating voltage must not be exceeded by more that 10% as this will result in reduced life expectancy.
The company reserves the right to change specifications without notice.
* Customer to supply resistor for desired operating current.
Luminous intensity is measured at 20mA on a discrete LED unless otherwise stated.
Luminous intensities and color shades of white LEDs may vary within a batch.
APEM
www.apem.com
1
Q SERIES Ø16mm (.630") Panel Mount LED Indicators
Technical Drawings
M16x1,0
18,30
0,720
2,8x0,8[0,11x0,031]
18,30
0,720
M16x1,0
4,75 0,187
13,50 0,531
33,75 1,329
10,00 0,394
9,35 0,368
4,75 0,187
13,50 0,531
28,75 1,132
7,00 0,276
5,50 ,217
WIRES
M16x1,0
M16x1,0
18,30
0,720
18,30
0,720
REAR EPOXY PINS
0,50 0,020
1,25 0,049
1,25 0,049
4,75 0,187
13,50 0,531
28,75 1,132
200,0+/-10
[7,874+/-0,393]
4,75 0,187
13,50 0,531
17,50 0,689
REAR EPOXY WIRES
M16x1,0
18,30
0,720
18,30
0,720
M16x1,0
SHORT BODY PINS
0,50 0,020
1,25 0,049
1,25 0,049
SHORT BODY WIRES
M16x1,0
18,30
0,720
4,75 0,187
13,50 0,531
17,50 0,689
200,0+/-10
[7,874+/-0,393]
4,75 0,187
13,50 0,531
19,75 0,778
16,00 0,630
14,50 0,571
4,75 0,187
13,50 0,531
19,75 19,750
200,0+/-10
[7,874+/-0,393]
M16x1,0
2,8x0,8[0,11x0,031]
M16x1,0
18,30
0,720
18,30
0,720
2,00 0,079
13,50[0,531]
33,60 1,323
10,00 0,394
9,35 0,368
2,00 0,079
13,50[0,531]
28,60 1,126
M16x1,0
18,30
0,720
18,30
0,720
2,00 0,079
13,50[0531]
28,60 1,126
200,0+/-10
[7,874+/-0,393]
2,00 0,079
13,50[0,531]
17,35 0,683
REAR EPOXY WIRES
M16x1,0
M16x1,0
18,30
0,720
18,30
0,720
SHORT BODY PINS
0,50 0,020
1,25 0,049
1,25 0,049
SHORT BODY WIRES
M16x1,0
18,30
0,720
2,00 0,079
13,50[0,531]
17,35 0,683
200,0+/-10
[7,874+/-0,393]
2,00 0,079
13,50[0,531]
19,60 0,772
16,00 0,630
14,50 1,450
2,00 0,079
13,50[0,531]
19,60 0,772
200,0+/-10
[7,874+/-0,393]
0,50 0,020
1,25 0,049
1,25 0,049
M16x1,0
WIRES
REAR EPOXY PINS
0,50 0,020
1,25 0,049
1,25 0,049
FLUSH BEZEL
0,50 0,020
1,25 0,049
1,25 0,049
PROMINENT BEZEL
SOLDER LUG/FASTONS
PINS
18,25 0,719
16,75 0,659
SOLDER LUG/FASTONS
PINS
7,00 0,276
5,50 0,217
18,25 0,719
16,75 0,659
2
www.apem.com
APEM
Q SERIES Ø16mm (.630") Panel Mount LED Indicators
Custom options
Secret Until Lit Polycarbonate Inserts
Off
Suffix the part number with legend code (see example on page 5)
Code
Symbol
Code
Symbol
Description
-3AH
-313
-3GP
-3AG
-327
-397
-3BU
-3K6
-3AJ
Turn Signal
Hazard
Oil can
Battery
Rear fog
Low beam
Brake test
Arrow
High beam
-3PB
-398
-3SB
-3TP
-3CE
-3EC
-3FP
-3BF
Description
Park Brake
Side Lights
Seat Belt
Tyre
Pressure
Check
Engine
Engine
Temperature
Fuel
Brake Failure
Some common codes are listed above, for your custom requirements please contact APEM.
APEM
www.apem.com
3
Q SERIES Ø16mm (.630") Panel Mount LED Indicators
Custom Engraving
Cable length & connector
Custom options
For custom cable length and
connectors please contact
APEM
Suffix the part number with legend code (see example on page 5)
Code
Symbol
Description
Code
Symbol
Description
-0AJ
-097
-027
-026
-021
-022
-023
-0AH
High Beam
Low Beam
Rear Fog
Front Fog
Windscreen
Wiper
Windscreen
Washer
Ventilator
Fan
Turn
Signal
Side Lights
-041
-013
-018
-0BU
-0K6
-0AG
-0GP
-020
Horn
Hazard
Warning
Heating
Brake Test
Arrow
Battery
Oil Can
Windscreen
Heating
ABS
Code
-0EL
-0SB
-0UB
-0ST
-0EU
-0AD
-012
-040
Symbol
Description
Engine
Coil
Seat Belt
USB
Connection
Steam
ECU
Side Step
Air Con
Engine
Boot/Trunk
Release
-098
-086
-0BR
Some common codes are listed above, for your custom requirements please contact APEM.
Unless specified standard engraving with white infill will be supplied.
4
www.apem.com
APEM
Q SERIES Ø16mm (.630") Panel Mount LED Indicators
Overview
STANDARD OPTIONS
The Q16 Series is available with a range of standard options, to specify your LED, simply choose one option from each
column. An example is shown below.
Q
SERIES
Q
16
MOUNTING
HOLE
16 = Ø16mm
F
BEZEL
STYLE
Metal
P = Prominent
F = Flush
Plastic
PP = Prominent
FP = Flush
1
TERMINALS
1 = Solder Lug/
Fastons
(2.8 x 0.8)
2 = Pins
3 = Wires
4 = Rear epoxy
Pins
5 = Rear epoxy
Wires
6 = Short body
Pins
7 = Short body
Wires
G
BEZEL FINISH
Metal
C = Bright Chrome
B = Black Chrome
G = Satin Grey
Plastic
CP = Bright
BP = Black
GP = Satin Grey
AU = Gold
XX
TYPE OF
ILLUMINATION
XX = Fixed Light
KK = Flashing Light
(12 - 28VDC)
YY = Bi-color
ZZ = Tri-color
Y
LED COLOR
R = Red
G = Green
Y = Yellow
B = Blue
W = White
O = Orange
24
VOLTAGE
02 = no resistor
*
06 = 6VDC
12 = 12VDC
12A = 12VAC/DC
24 = 24VDC
24A = 24VAC/DC
28 = 28VDC
E
SEALING
(Blank) = Unsealed
E = IP67
HR = Hyper Bright Red
HG = Hyper Bright Green
HY = Hyper Bright Yellow
HO = Hyper Bright Orange
28A = 28VAC/DC
110 = 110VAC
220 = 220VAC
SR = Super Bright Red
SG = Super Bright Green
SY = Super Bright Yellow
Example Q16F7BXXHR12E-3PB
Ø16mm, flush metal bezel, wire terminals
Matt black chrome finish, fixed light,
Red, 12VDC LED, IP67 panel sealed
Secret until lit Park Brake Symbol (see page 3)
SB = Super Bright Blue
SW = Super Bright White
RG = Red/Green
RY = Red/Yellow
GY = Green/Yellow
RYG = Red/Yellow/Green
• Gold Faston terminal denotes Anode (+), silver terminal denotes Cathode (-)
• Standard wire length is 200mm, 22AWG UL1007, red wire denotes Anode (+), black wire denotes Cathode (-)
for other wire lengths consult APEM
• For LEDs with alternative voltages consult APEM
• Bi-color LEDs, by connecting the gold Faston (+) one color is produced,
by reversing the supply voltage another color is produced – Bi-colors are available up to 28VDC
• Take care when soldering to the Faston terminals (recommended solder temperature 300°C - 3 sec)
• Short body pins and wires are only available up to 28VDC
• The Tri-color LED has red and green LEDs when both are connected yellow is produced
• Standard Tri-color Faston terminals are two Anodes (+) and one Cathode (-)
• Tri-color wires are one red (+) and one green (+) Anode and one black (-) Cathode
• Tri-color pins are center (–) Cathode, shortest (+) Anode pin green, longest (+) Anode pin red
• Maximum panel thickness 11mm
• We recommend using Hyperbright or Superbright LEDs for use at 110VAC and 220VAC
• For multi-voltage options please consult APEM
* = For resistorless versions (02) please refer to the forward voltage on page 1
APEM
www.apem.com
5
京公网安备 11010802033920号
EEWORLD
