IP Rating............................................................. IP 40 .....................................................................IP 40
*RoHS Directive 2002/95/EC Jan 27, 2003 including Annex.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
Model 97 & 99
-
5/8 ” Square Single-Turn Panel Control with Rotary Switch
Potentiometer Specifications
Mechanical Characteristics
1
Stop Strength (1/4 ” D shaft) .............................................................................................................................................45.19 N-cm (4 lb.-in.)
(1/8 ” D shaft) .............................................................................................................................................33.89 N-cm (3 lb.-in.)
Starting ........................................................................................................................................... 0.3 max. above average running torque
Running Torque
Single or Dual Section (A & R Bushings) .................................................................................................. 0.21 to 1.06 N-cm (0.3 to 1.5 oz.-in.)
Single or Dual Section (C & U Bushings) .................................................................................................. 0.14 to 1.06 N-cm (0.2 to 1.5 oz.-in.)
Mounting .............................................................................................................................................1.7-2.0 N-m (15-18 lb.-in.) maximum
Variation ...................................................................................................................... 0.35 N-cm (0.5 oz.-in.) maximum in 45 ° shaft travel
Weight (Single Section, Metal Bushing)...............................................................................................................................12.7 grams nominal
Terminals .................................................................................................................................Printed circuit terminals, J-Hooks or solder lugs
Soldering Condition ...........................................Recommended hand soldering using Sn95/Ag5 no clean solder, 0.025 ” wire diameter.
Maximum temperature 399 °C (750 °F) for 3 seconds. No wash process to be used with no clean flux.
Marking ..................................................................................Manufacturer’s trademark, date code, resistance, manufacturer’s part number
Ganging (Multiple Section Potentiometers).............................................................................................................................2 cups maximum
Hardware ...................One lockwasher and one mounting nut is shipped with each potentiometer, except where noted in the part number.
NOTE:
1
At
Performance specifications do not apply to units subjected to printed circuit board cleaning procedures.
room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
Model 97 & 99
-
5/8 ” Square Single-Turn Panel Control with Rotary Switch
Rotary Switch Specifications
Initial Electrical Characteristics
1
Contacts:
DPST ........................................................................................................................................................N.O/N.O., N.C./N.C. or N.O./N.C.
DPDT ..........................................................................................................................................................2 N.O./N.C. (break before make)
Power Rating (Resistive Load):
DPST ..................................................................................... 2 A @ 125 volts RMS-60 Hz or 2 A @ 28 VDC, 1 A @ 250 volts RMS-60 Hz
DPDT .....................................................................................................................................1 A @ 125 volts RMS-60 Hz or 1 A @ 28 VDC
Contact Bounce ...........................................................................................................................................................5 milliseconds maximum
Dielectric Withstanding Voltage (MIL-STD-202, Method 301)
Operating Temperature Range .................................................................................................................................................... 0 °C to +70 °C
Exposure Temperature Range ................................................................................................................................................-65 °C to +125 °C
Vibration (Dual Section).................................................................................................................................................................................. 8 G
Contact Resistance .................................................................................................................................................. 10 milliohms maximum
Contact Bounce ................................................................................................................................................... 0.1 millisecond maximum
Shock (Dual Section).................................................................................................................................................................................... 20 G
Contact Resistance .................................................................................................................................................. 10 milliohms maximum
Contact Bounce ................................................................................................................................................... 0.1 millisecond maximum
Rotational Life ................................................................................................................................................................................25,000 cycles
Switch Actuating Torque (50% Duty cycle @ Rated Power Load) ........................................................... 1.41 to 4.94 N-cm (2 to 7 oz.-in.)
Contact Resistance ................................................................................................................................................ 100 milliohms maximum
Moisture Resistance (MIL-STD-202, Method 106, Condition B)
Contact Resistance (0.1 VDC-10 mA) ..................................................................................................................... 10 milliohms maximum
Housing Material .......................................................................................................High temperature, flame retardant, thermosetting plastic
Mechanical Characteristics
1
Actuating Torque (Each Section, Switch Module Only).............................................................................. 3.53 to 10.59 N-cm (5 to 15 oz.-in.)
Running Torque (Out of Detent, 2-4 Module Assembly) ............................................................................. 0.21 to 1.41 N-cm (0.3 to 2 oz.-in.)
Detent ................................................................................................................................................................................CW or CCW standard
Contact Materials.................................................................................................................................................... Fine silver with gold overlay
Terminal Styles .............................................................................................................................................................................Solder lug only
Standard Orientation ........................................................................................................................................ In-line with control terminals
Optional ....................................................................................................................................................Rotated 90 ° CCW from standard
Terminal Strength (Before and After Soldering Heat Exposure) .................................................................................... 0.9 kg (2 lbs.) minimum
NOTE:
1
At
Performance specifications do not apply to units subjected to printed circuit board cleaning procedures.
room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
Model 97 & 99
-
5/8 ” Square Single-Turn Panel Control with Rotary Switch
Product Dimensions
Model 97 PC Pin Terminals, “L” Pattern
MOUNTING
SURFACE
L
12.70 ± .229
(.500 ± .009)
0.79 ± .025
(.031 ± .010)
DIA.
13.72 ± 0.38
(.540 ± .015)
1.37 ± 0.08
(.054 ± .003)
2.36 ± 0.08
(.093 ± .003)
15.88
(.625)
7.92
(.312)
SEE
HOW TO ORDER
CHART FOR
BUSHING OPTIONS.
DIA.
0.81
TYP.
(.032)
5.08 ± 0.38
(.200 ± .015)
11.05 ± 0.20
(.435 ± .008)
R1
1.19
(.047)
“A” STYLE
A.R. LUG
R
9.53
(.375)
12.7 ± 1.02
(.500 ± .040)
2.54
(.100)
2.54
(.100)
0.76 ± 0.05
(.030 ± .002)
TYP.
1
3
2
SEE
NEXT PAGE
FOR SHAFT
OPTIONS.
Model 99 Solder Lug Terminals, "Triangular" Pattern
Hello everyone, I am Pi Ziheng, a serious technical guy. Today, Pi Ziheng will talk to you about the linker file in embedded development .
In the previous lesson "Source Files (.c/.h/.s)" , Pi Ziheng ...
[i=s]This post was last edited by xld0932 on 2021-2-18 00:17[/i]1. LCD schematic diagram
The LCD part uses the GD32E503's EXMC (external memory controller) peripheral, which is used to access various ...
I/O Devices
The device model is also based on the kernel object modelCurrently supported I/O device types are as follows:
RT_Device_Class_Char /* Character device */
RT_Device_Class_Block /* Block dev...
In system programming (ISP) provides a convenient way to update firmware on a complete product. Even on a brand new product without any firmware installed, ISP can be used to install the initial firmw...
As described in Windows Vista Beta 1 vs. Mac OS X "Tiger" (Part 2), there are not many differences in power management between Windows and OS X. Each system has its own unique features. OS X supports ...
This is the picture of the failed download. The problem should be that the chip is set to read protection, but I don’t know how to solve it. Can someone help me take a look?...
The smoke detector MC14467-1 and MC14468 are special chips for ion smoke detection and alarm produced by Motorola, USA. They are large-scale CMOS circuit structures. They only need an external ion...[Details]
This evening, Honor held a new product launch conference. At the conference, Honor CEO Zhao Ming officially announced the appearance of the Honor 60 series. As a benchmark for aesthetic design in t...[Details]
Assume that the microcontroller uses 8051, the external ROM is not expanded, and the external RAM uses a 6116. Program the contents of the 10B of the internal ROM starting from the 0100H unit to the 1...[Details]
1. Enter a GUI application directory that has been written by Qt. For example, my application directory is /home/czd/qt_project/mp3player/. $ cd /home/czd/qt_project/mp3player/. I found that there is...[Details]
CDMA mobile communication system has the advantages of strong anti-interference ability, good confidentiality and large capacity, and has received widespread attention. CDMA uses the orthogonality ...[Details]
The official WeChat public account of China Energy News recently updated an article, announcing that the perovskite solar cell α module independently developed by Hangzhou Xianna Optoelectronics Te...[Details]
MCU is a core power electronic unit unique to new energy vehicles. It controls the motor to output the specified torque and speed by receiving the vehicle driving control instructions from the VCU,...[Details]
On the evening of February 22, Nord shares announced that the company plans to invest in the establishment of a wholly-owned subsidiary in Futian District, Shenzhen City, Guangdong Province, to furthe...[Details]
O Introduction
In the field of microelectronic devices, there are many studies on SiC devices, and great progress has been made. However, in the field of MEMS, there are still many problem...[Details]
I was helping a friend look at a program a while loop a while ago. The exit condition was equal to a double precision number. As a result, the program did not exit as expected. This made me think of t...[Details]
According to foreign media reports, a team led by scientists from the U.S. Department of Energy's Brookhaven National Laboratory and Lawrence Berkeley National Laboratory has successfully captured t...[Details]
This paper introduces the working characteristics and principles of the new peak current type PWM control chip FAN6754A, and analyzes the design principle and working process of the flyback switchi...[Details]
Retail stores are leveraging smart, connected Internet of Things (IoT) devices and technologies to streamline operations, reduce costs, and increase profits while improving the shopping experience fo...[Details]
Measuring principle:
Static electricity, as a measurement object, can be considered to be of two types. One is already generated somewhere in the factory; the other is generated in the basic researc...[Details]
Temperature control probe sensors are devices used to measure temperature and are widely used in industry, medical treatment, scientific research and other fields. Among temperature control probe s...[Details]
ARM Technology
京公网安备 11010802033920号
EEWORLD
