Specifications are limited by the circuit and resistance value.
Please contact us separately.
3 digits
●
Resistor Networks：RNX, RTX, RTY
RNX
Circuit
Code
RNX: Custom Resistor Network
RTX,RTY: SOT-23 Resistor network
●
Resistor Networks：RDA, RDB
RDA
Circuit
Code
RDA: Dual terminator network
RDB: Differential terminator network
Example
Q20
Package
Symbol
Package type symbol＋
Number of pins
Example
T
Terminal
Surface Material
T :Sn
TE
Taping
TE: Plastic
embossed
5001
Custom
Code
Q20
Package
Symbol
Same as above
(Except Q24, N14, N08)
T
Terminal
Surface Material
T:Sn
TE
Taping
TE: Plastic
embossed
471J
Nominal Resistance
& Tolerance of R1
3 digits G: ±2%
J : ±5%
511J
H
Contact us when you have control request for environmental hazardous material other than the substance specified by EU-RoHS.
Nominal Resistance
T.C.R.
& Tolerance of R2 （×10
−6
/K）
3 digits G: ±2%
E :±25
J : ±5%
C:±50
H:±100
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
Contact our sales representatives before you use our products for applications including automotives, medical equipment and aerospace equipment.
Malfunction or failure of the products in such applications may cause loss of human life or serious damage.
Oct. 2020
www.koaglobal.com
■Ratings
Package
Package Symbol
Package Power Rating
Resistance Range
Max. Working Voltage
Rated Voltage
Rated Ambient Temp.
Operating Temp. Range
10Ω〜1kΩ
1.1kΩ〜
Q16
0.8W
QSOP
Q20
1.0W
Q24
1.0W
N08
0.4W
SOIC
N14
0.6W
N16
0.8W
SOT-23
S03
0.2W
Power Rating 200mW/Resistor Element
※1
Power Rating 50mW/Resistor Element
※1
100V
√￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣
Rated Power×Nominal Resistance Value, Rated Voltage should not exceed Max. Working Voltage.
＋70℃
−55℃〜＋125℃
※2
Above ratings are based on the thermal resistances using a multi-layer circuit board (EIA/JESD51). For mounting on a mono-layer board, power derating shall be needed. Please inquire of us about
conditions.
※1 Total power consumption of all elements should not exceed the package power rating.
※2 About operating temperature range −55℃〜＋155℃, We can provide as custom devices. Please inquire of us about it.
●Standard Resistor Networks
Circuit
Code
Circuit Schematics
（Top View）
Pin n
Number
of Pins
T.C.R.
（×10
−6
/K）
E:±25
C:±50
H:±100
Resistance Range
（Ω）
E24
and Absolute Tolerance
F:±1%
G:±2%, J:±5%
100〜100k 100〜100k
51〜100k
30〜100k
n/2
51〜100k
10〜100k
Circuit
Code
Circuit Schematics
（Top View）
Pin n
R1
Number
of Pins
T.C.R.
（×10
−6
/K）
E:±25
Resistance Range(Ω) (E24)
and Resistance Tolerance
G:±2%, J :±5%
Network Resistors
Pin n
RBA
R
8, 14, 16
R
20, 24
n/2
Number of Pins : n=8,16,20,24
RDA
R2
-
R1
R2
-
16, 20
C:±50
H:±100
Pin n
R1
Pin 1
Pin n
R
Pin n
Pin 1
Pin 1
n/2
R1=
150〜10k
R1: R2=
1:1〜1: 4
Pin n
Pin
:
Number of Pins
n
n=8,16,20,24
E:±25
n
100〜100k
Pin
100〜100k
R
Pin n
R1
R2
E:±25
C:±50
H:±100
RBB
R
Pin 1
n/2
Pin
8, 14, 16
20, 24
C
R
n
C:±50
R1
R
R2
R1
Pin 1
51〜100k
30〜100k
n/2
51〜100k
10〜100k
100〜40k
2R
n/2
RDB
Pin 1
R1
Pin 1
n/2
16, 20
R2
R1
Pin
Number
1
Pins
R
2
1
n/2
: n=8,16,20,24
R
of
H:±100
E:±25
C:±50
Pin 1
R1=
150〜10k
R1: R2=
1:1〜1: 4
Pin 1
Number of Pins : n=3,SOT-23 Only
Pin 1
100〜40k
Pin n
R
R
Pin n
RTX
n/2
Pin n
R
1
R
2
R
2R
2R
R
R
2
3
SOT-23
Only
2R
2R
Number of Pins : n=8,16,20,24
RLA
R
2R
2R
R
2R
2R
n/2
14, 16
H:±100
1k〜30k
H:±100
2R
51〜40k
2R
51〜40k
2R
Pin 1
Pin 1
n/2
ber of Pins : n=8,16,20
Number of Pins : n=3,SOT-23 Only
Pin 1
n/2
■Performance
Test Items
Resistance
T.C.R.
Resistance to soldering heat
Rapid change of temperature
Moisture resistance
Endurance at 70℃
High temperature exposure
Performance Requirements
ΔR±
（％＋0.05Ω）
Limit
Typical
25℃
＋25℃/−55℃, ＋25℃/125℃
260℃±5℃, 10s±1s
−55℃
（30min.）
/＋125℃
（30min.）, 100 cycles
40℃±2℃, 90〜95%RH, 1000h
1.5h ON/0.5 h OFF cycle
70℃±2℃, 1000 h
1.5 h ON/0.5 h OFF cycle
＋125℃, 1000 h
Within specified tolerance
Within specified T.C.R.
0.1
※3
0.5
※3
Test Methods
0.05
0.05
0.05
0.05
0.10
0.5
※3
0.25
※3
0.25
※3
※3 Guaranteed value differs depending on resistance value.
■Precautions for Use
・
he resistor of this product is formed by narrow patterning a thin metal film. Thus, application of excessive voltage causes burn and destruction of the resistive
T
film, abnormality in resistance or open resistance and loss of proper function. The properly and electrostatically measured taping materials are used for the
components, but attention should be paid to the fact that there is some danger the parts may be destructed by static electricity(equivalent to 500V and more at
100pF, 1.5kΩ) to cause a change in resistance in the conditions of an excessive dryness when mounting on the boards. Similarly, care should be given not to apply
the excessive static electricity at the time of mounting on the boards. When designing, consideration can be taken into withstanding ESD for customized KPC
products. Please consult with us about the details.
・Hand
soldering by iron soldering or repairment are not recommended because KPC is a multi-pin product.
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
Contact our sales representatives before you use our products for applications including automotives, medical equipment and aerospace equipment.
Malfunction or failure of the products in such applications may cause loss of human life or serious damage.
Oct. 2020
www.koaglobal.com
NETWORKS
EU
RoHS
KPC RIA
KPC RNX
Isolated Resistor Networks
Custom Resistor Networks
■Applications
・
utomotives, medical instrument, industrial machines, Measurement equipment
A
・
omputers and networks
C
・
igh precision OP amp circuit, High precision voltage divider
H
■Features
・
High precision resistor networks
Combination of different resistance is available for custom circuit.
[i=s]This post was last edited by mig29 on 2020-11-3 01:20[/i]I have complained to the editor before that the original manufacturer's information in the review post is incomplete and users need to exp...
Hey guys, has anyone used MAX11410? Please help me answer this question, thank you! The question is as follows: I made a 4-wire thermistor temperature detection circuit according to the reference circ...
[i=s] This post was last edited by zhangtai on 2019-2-13 21:23 [/i] On the second day of the Chinese New Year, there was a family gathering. The family was chatting, and the uncle suddenly gave his ne...
As a simple digital communication method, I2C only needs two data lines to complete the communication between the host (Master) and the slave (Slave) at a short distance, saving MCU pins and additiona...
Hello, moderators and professional technicians: I am a new student. I have recently uploaded three learning materials. I am not able to evaluate the quality of the uploaded materials and the newness a...
Event details: Click here to view
Application deadline: March 29
Development board introduction:
AT-START-F421 is based on the AT32F421C8T7 chip, and its peripherals include LED lights, buttons, and A...
After reading the introduction of TFTLCD and FSMC (Flexible Static Memory Controller), I still have only a vague understanding and don't understand what they are talking about. TFTLCD uses 80 paralle...[Details]
At present, a new round of scientific and technological revolution represented by new energy, new materials, artificial intelligence, etc. is having a significant and far-reaching impact on the globa...[Details]
/*Define the number of bits of the LED digital tube. This driver only implements 3-bit and 4-bit operations, so the value of LED_BIT_COUNT can only be 3 or 4*/ #define LED_BIT_COUNT 4 /*********...[Details]
1. Bit Logic Instructions
1. Contact and coil instructions
Programming principles of PLC ladder diagram language
1. The ladder diagram consists of multiple rungs. Each coil can const...[Details]
At the 2019 World Artificial Intelligence Conference, the 2019 World Artificial Intelligence Technology Trend Analysis Report and Artificial Intelligence Technology Maturity Curve were officially rel...[Details]
Today, the average production cost of an electric vehicle is $12,000 higher than a traditional internal combustion engine vehicle, according to a McKinsey report. As automakers work to meet global em...[Details]
The ISL8216M is ready to use and only requires the ISL8216M/input and output capacitors and a resistor to set the output voltage for a complete high voltage power supply design. The ISL8216M is avail...[Details]
introduce: Universal Asynchronous Receiver/Transmitter (UART). It is used to transmit serial data. When sending data, the CPU writes parallel data into the UART, and the UART sends it serially on a...[Details]
introduction
PIC18Fxx8 single-chip microcomputer is a high-end product of 16-bit RISC instruction set launched by Microchip of the United States. It has a good application prospect because o...[Details]
According to supply chain sources, the development of Apple's M2 series processors is nearly completed and will be mass-produced using TSMC's 4nm process. In the future, Apple Silicon will be u...[Details]
(Source: KIT official website) According to foreign media reports, a research team at Karlsruhe Institute of Technology (KIT) has used a new coating process to produce lithium-ion battery elect...[Details]
Video surveillance is an important part of the security system, including front-end cameras, transmission cables, and video surveillance platforms. Cameras can be divided into network digital came...[Details]
On October 14, Yancheng City held the seventh press conference of the series of themed press conferences of "Carbon Road Pioneer" to further deepen reform and bravely develop new quality productivity....[Details]
Domestic Chip Exchange
京公网安备 11010802033920号
EEWORLD
