85/86 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch
Potentiometer Specifications
Initial Electrical Characteristics
1
Conductive Plastic Element
Cermet Element
Standard Resistance Range
Linear Tapers (A, B, E, & H) ..................................................................(B & E) 1 K ohms to 1 megohm ............. (A & H) 100 ohms to 1 megohm
Audio Tapers (C, D, F, G, S, & T) .........................................................(D, G, S, & T) 1 K ohms to 1 megohm ... (C & F) 1 K ohms to 1 megohm
Total Resistance Tolerance .........................................................................±20 % or 10 % ...................................... ±10 % or 5 %
Absolute Minimum Resistance ...................................................................2 ohms maximum .................................. 2 ohms maximum
Operating Temperature Range ...................................................................-40 °C to +125 °C.................................. -40 °C to +125 °C
Storage Temperature Range ......................................................................-55 °C to +125 °C.................................. -55 °C to +125 °C
Temperature Coefficient Over Storage Temperature Range ......................±1,000 ppm/°C ...................................... ±150 ppm/°C
Vibration (Single Section) ...........................................................................15 G ....................................................... 15 G
Total Resistance Shift ...........................................................................±2 % maximum ..................................... ±2 % maximum
Voltage Ratio Shift ................................................................................±5 % maximum ..................................... ±5 % maximum
Shock (Single Section) ...............................................................................30 G ....................................................... 30 G
Total Resistance Shift ...........................................................................±2 % maximum ..................................... ±2 % maximum
Voltage Ratio Shift ................................................................................±5 % maximum ..................................... ±5 % maximum
Total Resistance Shift ...........................................................................±10 % maximum ................................... ±5 % maximum
Rotational Life (No Load) ............................................................................100,000 cycles ...................................... 100,000 cycles
Total Resistance Shift ...........................................................................(Linear taper) 10 ohms or ..................... (All tapers) ±5 % TRS maximum
Moisture Resistance (MIL-STD-202, Method 103, Condition B)
Total Resistance Shift ...........................................................................(B & E tapers) ±10 % maximum ........... ±5 % maximum (all tapers)
IP Rating .....................................................................................................IP 40 ...................................................... IP 40
Starting and Running Torque (Non-Locking Bushings)
Single Section ................................................................................................................................................................. 0.14 to 1.06 N-cm (0.2 to 1.5 oz.-in.)
Dual Section .................................................................................................................................................................... 0.14 to 1.06 N-cm (0.2 to 1.5 oz.-in.)
Triple Section ................................................................................................................................................................... 0.35 to 1.41 N-cm (0.5 to 2.0 oz.-in.)
Quadruple Section .......................................................................................................................................................... 0.35 to 1.41 N-cm (0.5 to 2.0 oz.-in.)
Starting and Running Torque (Locking Bushings) ..................................................................................................... 0.14 to 2.82 N-cm (0.2 to 4.0 oz.-in.)
Shaft Locking Torque with Locknut @ 10 in-lb. (B & E Bushings) ........................................................................................................ 14 N-cm (20 oz-in.)
Mounting ...................................................................................................................................................................1.7-2.0 N-m (15-18 lb.-in.) maximum
Weight (Single Section).............................................................................................................................................................................. 21 grams maximum
(Each Additional Section) ...................................................................................................................................................................... 6 grams maximum
Terminals .......................................................................................................................................................................... Printed circuit terminals or J-Hooks
Soldering Condition .................................................................. Recommended hand soldering using Sn95/Ag5 no clean solder, 0.025 ” wire diameter.
Maximum temperature 399 °C (750 °F) for 3 seconds. No wash process to be used with no clean flux.
Marking.......................................................................... Manufacturer’s trademark, wiring diagram, date code and resistance, manufacturer’s part number
Ganging (multiple section potentiometers) ..................................................................................................................................................... 4 cup maximum
Hardware ...........................................One lockwasher and one mounting nut is shipped with each potentiometer, except where noted in the part number.
For dimensional drawings see pages 3 & 4.
For ordering information see page 5.
NOTE: Model 81/82 performance specifications do not apply to units subjected to printed circuit board cleaning procedures.
1At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.
*RoHS Directive 2002/95/EC Jan 27, 2003 including Annex.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications
81/82 - 5/8 ” Square Single-Turn Panel Control
85/86 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch
Rotary Switch Specifications
Initial Electrical Characteristics
1
Contacts:
DPST ...............................................................................................................................................................................N.O/N.O.,N.C./N.C. or N.O./N.C.
DPDT ................................................................................................................................................................................2 N.O./N.C. (break before make)
Power Rating (Resistive Load):
DPST ............................................................................................................ 2 A @ 125 volts RMS-60 Hz or 2 A @ 28 VDC, 1 A @ 250 volts RMS-60 Hz
DPDT ........................................................................................................................................................... 1 A @ 125 volts RMS-60 Hz or 1 A @ 28 VDC
Operating Temperature Range ...........................................................................................................................................................................0 °C to +70 °C
Storage Temperature Range ........................................................................................................................................................................ -65 °C to +125 °C
Vibration (Dual Section) ....................................................................................................................................................................................................... 8 G
(Triple Section) .................................................................................................................................................................................................... 5 G
(Quadruple Section) ........................................................................................................................................................................................... 3 G
Contact Resistance ........................................................................................................................................................................ 10 milliohms maximum
Contact Bounce ......................................................................................................................................................................... 0.1 millisecond maximum
Shock (Dual Section) ......................................................................................................................................................................................................... 20 G
(Triple Section) ...................................................................................................................................................................................................... 15 G
(Quadruple Section) ............................................................................................................................................................................................. 10 G
Contact Resistance ........................................................................................................................................................................ 10 milliohms maximum
Contact Bounce ......................................................................................................................................................................... 0.1 millisecond maximum
Rotational Life ..................................................................................................................................................................................................... 25,000 cycles
Switch Actuating Torque (50% Duty cycle @ Rated Power Load) .................................................................................. 1.41 to 4.94 N-cm (2 to 7 oz.-in.)
Contact Resistance ...................................................................................................................................................................... 100 milliohms maximum
Moisture Resistance (MIL-STD-202, Method 106, Condition B)
Contact Resistance (0.1 VDC-10 mA) ............................................................................................................................................ 10 milliohms maximum
Switch Housing Material ................................................................................................................. High temperature, flame retardant, thermosetting plastic
Mechanical Characteristics
1
Actuating Torque (Each Section, Switch Module Only) ....................................................................................................... 3.53 to 10.6 N-cm (5 to 15 oz.-in.)
Running Torque (Out of Detent, 2-4 Module Assembly)..................................................................................................... 0.21 to 1.41 N-cm (0.3 to 2 oz.-in.)
Detent ..................................................................................................................................................................................................... CW or CCW standard
Contact Materials ..........................................................................................................................................................................Fine silver with gold overlay
Terminal Styles .................................................................................................................................................................................................. Solder lug only
Standard Orientation ..............................................................................................................................................................In-line with control terminals
Optional .......................................................................................................................................................................... Rotated 90 ° CCW from standard
Terminal Strength (Before and After Soldering Heat Exposure) .......................................................................................................... 0.9 Kg (2 lbs.) minimum
NOTE: Model 81/82 performance specifications do not apply to units subjected to printed circuit board cleaning procedures.
1At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications
Provide a section of AD sampling FPGA programThe program is as followsVerilog source program is as follows://---------------------------------------------------------------------------
//-- File name:...
How to get out of the area of "the calculation formula of capacitors with DC isolation, AC passing and capacitive reactance", I found that I am still at this stage. I don't know how to analyze the cap...
I worked at an unknown semiconductor company in Guangzhou. The company's products were mainly LED driver chips and lithium battery chips. I started in the LED lighting department and later transferred...
SRIO error detection is mainly divided into two parts, physical layer error detection, logical layer / transport layer error detection, each error detection has a specific register to control. Physica...
[i=s]This post was last edited by qq849682862 on 2021-9-6 20:04[/i]Brand new RIGOL DC power supply, DP832 (three channels), all options are on, equivalent to the monochrome version DP832A ! You can al...
This month's insurance has not been paid yet. I asked my boss and he said it will be paid at the end of the month.Salaries are also paid at the end of the month. When asked why, he said he would get p...
Cross-compilation: Develop programs on a PC (x86 platform) and run them on an ARM board to increase development and compilation speed. environment: Tiny4412SDK1506 Development Board Software requ...[Details]
3.5 Output Rectification and Filtering Circuit
It is composed of a rectifier diode, a filter capacitor and a smoothing inductor. The high-frequency square wave voltage of the secondary winding is...[Details]
This article mainly introduces the structure and functions of the junction box, a packaging material for solar cell modules:
Figure 1 Solar cell module junction box
1. Structure of the ju...[Details]
In portable electronic products, touch screens have gradually replaced keyboards as a human-computer interaction input device commonly used in embedded computer systems due to their convenience, fl...[Details]
Due to mature technology and low cost, LCD screens are still used in a large number of low-end Android products and some iPhone series products. However, LCD screens have been gradually replaced by O...[Details]
BYD's sales have increased from 170,000 units in 2008 to 1.86 million units in 2022, and it has announced an ambitious goal of hitting 4 million unit sales in 2023, scaring many European, American an...[Details]
Oscilloscopes are the most commonly used measuring instruments for electronic engineers, and oscilloscope probes are undoubtedly the most commonly used accessories for oscilloscopes. Oscilloscope pro...[Details]
CTC battery technology (full name: Cell to Chassis, battery-body integration technology, hereinafter referred to as CTC) has become a hot topic recently.
In September 2020, Tesla first r...[Details]
Keywords: Amplitude modulation control; Pulse frequency modulation; Pulse density modulation; Resonant pulse width modulation; Pulse width plus frequency modulation Research on Control Methods of
...[Details]
In 1993, Shuji Nakamura of Nichia Chemical Industry of Japan accidentally found a way to make LED lights emit blue light. This further expanded the application scope of LED lights and allowed LED ligh...[Details]
Not long ago, iPad2 was launched amid the anticipation of Apple fans around the world, and is expected to continue Apple's legend. And a piece of news not long ago also made the medical field, whic...[Details]
LCD Address Setting The figure only shows the data line and the address line. I didn't draw the other lines. Please think about it. If you really can't help, please look at the LCD schematic ...[Details]
July 20 news: Yesterday, Tsinghua Unigroup stated on an interactive investment platform that the company started developing network chips in 2019. At the end of last year, the company's high-end netw...[Details]
With the rapid growth of China's new energy vehicles in 2023, the global power battery market will also rise accordingly. Although the global installed capacity in December 2023 has not yet been relea...[Details]
Optimizing Power Consumption in Vision Systems with Wake on Motion
Optimizing Vision System Power Consumption Using Wake-on-Motion
Have you ever wondered how a smart d...[Details]