Y1728118R000D1L datasheet, PDF

Datasheet> All Categories > Passive components> The resistor> Y1728118R000D1L

Y1728118R000D1L: DescriptionFixed Resistor, Metal Foil, 1.5W, 118ohm, 500V, 0.5% +/-Tol, -2,2ppm/Cel,; CategoryPassive components The resistor; File Size451KB，6 Pages; ManufacturerVishay; Websitehttp://www.vishay.com

Download Datasheet Parametric View All

Y1728118R000D1L Overview

Fixed Resistor, Metal Foil, 1.5W, 118ohm, 500V, 0.5% +/-Tol, -2,2ppm/Cel,

Y1728118R000D1L Parametric

Parameter Name	Attribute value
Is it Rohs certified?	incompatible
Objectid	851443506
Reach Compliance Code	compliant
ECCN code	EAR99
structure	Hermetically Sealed
JESD-609 code	e0
Lead diameter	0.64 mm
Lead length	25.4 mm
Number of terminals	4
Maximum operating temperature	125 °C
Minimum operating temperature	-55 °C
Package diameter	12.7 mm
Package length	25.4 mm
Package form	4 Terminals
method of packing	Bulk
Rated power dissipation(P)	1.5 W
resistance	118 Ω
Resistor type	FIXED RESISTOR
series	H(OTHER)
technology	METAL FOIL
Temperature Coefficient	-2,2 ppm/°C
Terminal surface	Tin/Lead (Sn/Pb)
Tolerance	0.5%
Operating Voltage	500 V

Preview

Download Datasheet

View All

H Series

Vishay Foil Resistors

New Generation of Secondary Standards Hermetically Sealed High Precision Bulk

Metal

Foil Technology Resistors with TCR of ± 2 ppm/°C, Tolerance of ± 0.001 % and

Load Life Stability of ± 0.005 % (Metrology, Laboratory, Instrumentation, Industrial)

FEATURES

•

Temperature coefficient of resistance (TCR):

± 2 ppm/°C typical (- 55 °C to + 125 °C, + 25 °C

ref.).

For

ultra

high

performances

(instrumentation and metrology) please refer to

the last page

•

Resistance range: 5

to 1.84 MΩ (higher or

lower values of resistance available)

•

Vishay Foil resistors are not restricted to standard values;

specific “as required” values can be supplied at no extra

cost or delivery (e.g. 1K2345 vs. 1K)

•

Power rating: 0.3 W to 2.5 W at + 25 °C (depending on

model - see table 2)

•

Tolerance: to ± 0.001 % (10 ppm)

•

Load life stability to ± 0.002 % (20 ppm) at 25 °C, 2000 h

at rated power

•

Load life stability can be considerably improved

through in-house stabilization

•

Shelf life stability: ± 2 ppm for at least 6 years

(unaffected by humidity)

•

Electrostatic discharge (ESD) up to 25 000 V

•

Rise time: 1 ns effectively no ringing

•

Thermal stabilization time < 1 s (nominal value achieved

within 10 ppm of steady state value)

•

Current noise: 0.010 µV

RMS

/V of applied voltage (< - 40 dB)

•

Thermal EMF: 0.05 µV/°C typical

•

Voltage coefficient: < 0.1 ppm/V

•

Non-inductive: < 0.08 µH

•

Non-inductive, non-capacitive design

•

Non hot spot design

•

Terminal finish available: lead (Pb)-free or tin/lead alloy

•

Impervious to harmful environments - oil-filled

•

Compliant to RoHS directive 2002/95/EC

•

Prototype quantities available in just 5 working days

or sooner. For more information, please contact

foil@vishaypg.com

•

For better performances (values, TCR, tolerance, stability),

please see the HZ series

INTRODUCTION

The H series resistors are oil-filled, hermetically sealed ultra

precision resistors and are used as secondary standards for

metrology applications.

The hermetic sealing eliminates the ingress of moisture and

oxygen, while the oil acts as a thermal conductor, thus

eliminating the long-term degradation elements of unsealed

resistors, while at the same time allowing the device to

accept short periods of overload without degradation.

Vishay’s Bulk Metal

Foil outperforms all other resistor

technologies available today for applications that require

precision and stability. When combined with the hermetic

sealing and oil filling, the H series resistors become

the most

precise and stable resistors available.

With accuracies of 0.001 %, a resistance range from 5

to 1.84 MΩ, and long term shelf life of less than 2 ppm,

these devices are virtually secondary standards that can be

carried in sets for daily or periodic calibration of factory

measurement equipment.

The H series is available with laboratory and metrology

level precision and long-term stability with additional

in-house oriented processes such as: chip stabilization,

special TCR plotting, additional treatments for ultra

stability and special post manufacturing operations

(PMO). (Please refer to the last page)

TABLE 1 - TCR VS. RESISTANCE VALUE

RESISTANCE

VALUE (Ω)

100 to < 1M84

50 to < 100

5 to < 50

TYPICAL TCR AND MAX. SPREAD

(- 55 °C to + 125 °C, + 25 °C ref.)

(ppm/°C)

± 2 ± 2.5

± 2 ± 3.5

± 2 ± 4.5

FIGURE 1 - SHELF LIFE - VHA518-11

12K9 VS. QHE

0.9

0.8

0.7

0.6

0.5

0.4

0.3

0.2

0.1

- 0.1

100 200 300 400 500 600 700 800 900 1000

Note

• For maximum TCR < 1 ppm/°C, see VHP100 and contact

application engineering

* Pb containing terminations are not RoHS compliant, exemptions may apply

Resistance Change (ppm)

Time (Days)

Document Number: 63006

Revision: 23-Mar-10

For any questions, contact:

foil@vishaypg.com

www.foilresistors.com

Recommended Resources

Picture tube protection circuit

Measurement display circuit of automatic digital voltmeter

Magnetic sensor speed measurement circuit

Rhythm-changing signal generation circuit

Direct optical coupling isolation amplifier circuit

Three-phase motor energy consumption braking circuit (1)

LSM6DSO(X) sensor driver key code analysis: read_data_polling routine related resources: How to quickly implement drive test of ST sensor through STM32 microcontroller Video demonstration, how to quickly implement the drive test of ST sensor (LSM6DSOX) through STM32 microcontroller LSM6DS...; littleshrimp ST Sensors & Low Power Wireless Technology Forum

[Gesture recognition and scene reproduction based on ESP32] Material unboxing—ESP32-S2-KALUGA-1 and k210: We would like to thank the organizers EEWORLD and Digi-Key Electronics for the carefully constructed competition platform and the development boards they provided.The topic of this competition is: Pos...; walker2048 DigiKey Technology Zone

PCB copper plating problem: When PCB copper is laid, the distance between different network grounds is relatively small, so there may be a cross phenomenon when laying copper. For example, there are two different zero potentials...; ena PCB Design

[Project source code] Using scripts in Quartus II to convert sof to rbf files: This article and design code were written by FPGA enthusiast Xiao Meige. Without the author's permission, this article is only allowed to be copied and reproduced on online forums, and the original au...; 小梅哥 Altera SoC

[Flower carving DIY] Interesting and fun music visualization series of small projects (07) --- large square spectrum light: I had the urge to do a series of topics on sound visualization. This topic is a bit difficult and covers a wide range of areas. The related FFT and FHT algorithms are also quite complicated, but I sti...; eagler8 DIY/Open Source Hardware

stm32 and dht11: uint8_t DHT11_Read_Data(uint8_t *temp,uint8_t *humi){uint8_t buf[5];uint8_t i;DHT11_Rst();if(DHT11_Check()==0){printf("fffff");for(i=0;i 5;i++)//Read 40-bit data{buf[i]=DHT11_Read_Byte();}if((buf[0]+b...; 邻居0 stm32/stm8

Shortcut: E0 E1 E2 E3 E4 E5 E6 E7 E8 E9 EA EB EC ED EE EF EG EH EI EJ EK EL EM EN EO EP EQ ER ES ET EU EV EW EX EY EZ F0 F1 F2 F3 F4 F5 F6 F7 F8 F9 FA FB FC FD FE FF FG FH FI FJ FK FL FM FN FO FP FQ FR FS FT FU FV FW FX FY FZ G0 G1 G2 G3 G4 G5 G6 G7 G8 G9 GA GB GC GD GE GF GG GH GI GJ GK GL GM GN GO GP GQ GR GS GT GU GV GW GX GZ H0 H1 H2 H3 H4 H5 H6 H7 H8 HA HB HC HD HE HF HG HH HI HJ HK HL HM HN HO HP HQ HR HS HT HU HV HW HX HY HZ I1 I2 I3 I4 I5 I6 I7 IA IB IC ID IE IF IG IH II IK IL IM IN IO IP IQ IR IS IT IU IV IW IX J0 J1 J2 J6 J7 JA JB JC JD JE JF JG JH JJ JK JL JM JN JP JQ JR JS JT JV JW JX JZ K0 K1 K2 K3 K4 K5 K6 K7 K8 K9 KA KB KC KD KE KF KG KH KI KJ KK KL KM KN KO KP KQ KR KS KT KU KV KW KX KY KZ

Popular Components