As the title says, I need help finding a serial port assistant that can send commands alternately and supports 2400 baud rate
I have a device that can send commands alternately, but it doesn't support...
As shown in the photo: the higher the DC voltage connected to the ground by the negative pole of the battery, the greater the error of the AD value read by the microcontroller. Please tell me how to e...
The circuit needs to drive 8 relays. When multiple relays are closed and turned on, the current increases greatly. To ensure the actual effect, while widening the current line, it is hoped that the so...
When we do projects, we usually configure GPIO to the highest frequency, but this highest frequency has never been measured.
Ideally, the main frequency should be around 120M and the 50M flip should b...
Smart meters are an important part of today’s smart grid. A smart grid does more than just support power generation and distribution; it is an ecosystem consisting of Internet of Things (IoT) technolo...
Prepare the evaluation kit and connect it to the LaunchPad development kit
The LMG5200 evaluation module (EVM) comes with a circuit that drives the GaN integrated circuit (IC). You need to disconnect ...