Protection Device
TVS (Transient Voltage Suppressor)
ESD217-B1-02EL
Bi-directional, +14 / -8 V, 9 pF, 0402, RoHS and Halogen Free compliant
ESD217-B1-02EL
Data Sheet
Revision 1.1, 2014-11-11
Final
Power Management & Multimarket
Edition 2014-11-11
Published by
Infineon Technologies AG
81726 Munich, Germany
© 2014 Infineon Technologies AG
All Rights Reserved.
Information
For further information on technology, delivery terms and conditions and prices, please contact the nearest
Infineon Technologies Office (www.infineon.com)
Warnings
Due to technical requirements, components may contain dangerous substances. For information on the types in
question, please contact the nearest Infineon Technologies Office.
Infineon Technologies components may be used in life-support devices or systems only with the express written
approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure
of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support
devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain
and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may
be endangered.
ESD217-B1-02EL
Product Overview
1
1.1
•
Product Overview
Features
•
•
•
•
•
•
ESD / transient protection according to:
–
IEC61000-4-2 (ESD): ±30 kV (air), ±25 kV (contact)
–
IEC61000-4-4 (EFT): ±3 kV / ±60 A (5/50 ns)
–
IEC61000-4-5 (Surge): ±3 A (8/20 µs)
Asymmetrical, bi-directional working voltage up to
V
RWM
= +14 V / -8 V
Low capacitance:
C
L
= 9 pF (typical)
Low clamping voltage:
V
CL
= 26 V (typical) at
I
TLP
= 16 A
Very low reverse current:
I
R
< 1 nA (typical)
Ultra low dynamic resistance:
R
DYN
= 0.2
Ω
(typical)
Pb-free (RoHS compliant) and halogen free package
1.2
•
•
•
•
•
Application Examples
USB 2.0, 10/100 Ethernet, Firewire, DVI
Mobile communication
Consumer products (STD, MP3, DVD, DSC...)
LCD display, camera
Notebooks and destop computers, peripherals
1.3
Product Description
Pin 1 marking
(lasered)
Pin 1
Pin 2
Pin 2
PinConf_and_SchematicDiag.vsd
Pin 1
Figure 1-1 Pin Configuration and Schematic Diagram
Table 1-1
Type
ESD217-B1-02EL
Part Information
Package
TSLP-2-19
Configuration
1 line, bi-directional
Marking code
B
Final Data Sheet
3
Revision 1.1, 2014-11-11
ESD217-B1-02EL
Characteristics
2
Characteristics
Table 2-1
Parameter
Maximum Ratings
at
T
A
= 25 °C, unless otherwise specified
Symbol
Values
±30
±25
85
±3
-55 to 125
-65 to 150
Unit
kV
W
A
°C
°C
ESD air discharge
1)
ESD contact discharge
1)
Peak pulse power
2)
Peak pulse current
2)
Operating temperature range
Storage temperature
1)
V
ESD
according to IEC61000-4-2
V
ESD
P
PK
I
PP
T
OP
T
stg
2) Non-repetitive current pulse 8/20µs exponential decay waveform according to IEC61000-4-5
Attention: Stresses above the max. values listed here may cause permanent damage to the device.
Exposure to absolute maximum rating conditions for extended periods may affect device
reliability. Maximum ratings are absolute ratings; exceeding only one of these values may
cause irreversible damage to the integrated circuit.
2.1
Electrical Characteristics
at
T
A
= 25 °C, unless otherwise specified
$ %
& %'
&
%(
&
&(
!" ! ! #
Figure 2-1 Definitions of electrical characteristics
Final Data Sheet
4
Revision 1.1, 2014-11-11
ESD217-B1-02EL
Characteristics
Table 2-2
Parameter
DC Characteristics
at
T
A
= 25 °C, unless otherwise specified
Symbol
Min.
-8
14.5
8.5
–
17
11.5
<1
Values
Typ.
Max.
14
20
14
50
nA
V
V
Pin 2 to Pin1
Unit
Note / Test Condition
Reverse working voltage
V
RWM
Breakdown voltage
V
BR
I
R
= 1 mA
Pin2 to Pin1
Pin1 to Pin2
Reverse current
Table 2-3
Parameter
Line capacitance
Series inductance
Table 2-4
Parameter
Clamping voltage
1)
Clamping voltage
2)
I
R
–
V
R
= 3.3 V
AC Characteristics
at
T
A
= 25 °C, unless otherwise specified
Symbol
Min.
Values
Typ.
9
0.4
Max.
13
–
pF
nH
–
–
Unit
Note / Test Condition
C
L
L
S
V
R
= 0 V,
f
= 1 MHz
ESD and Surge Characteristics
at
T
A
= 25 °C, unless otherwise specified
Symbol
Min.
Values
Typ.
26
29
25.5
24
0.2
0.4
Max.
–
–
–
–
–
–
Ω
V
–
–
–
–
Unit
Note / Test Condition
V
CL
I
TLP
= 16 A,
t
p
= 100 ns
I
TLP
= 30 A,
t
p
= 100 ns
I
PP
= 3 A,
t
p
= 8/20 µs,
Pin2 to Pin1
I
PP
= 3 A,
t
p
= 8/20 µs,
Pin1 to Pin2
Dynamic resistance
1)
R
DYN
–
–
t
p
= 100 ns, Pin2 to Pin1
t
p
= 100 ns, Pin1 to Pin2
1) Please refer to Application Note AN210[1]. TLP parameter:
Z
0
= 50
Ω ,
t
p
= 100ns,
t
r
= 300ps.
2) Non-repetitive current pulse 8/20µs exponential decay waveform according to IEC61000-4-5
Final Data Sheet
5
Revision 1.1, 2014-11-11
Power technology
京公网安备 11010802033920号
EEWORLD
