• Extremely low wavelength dependent loss (WDL) and PDL
• Up to 10-channel arrays
Applications
• EDFA
• Raman amplifiers
• Add/Drop monitoring
• DWDM systems
JDSU miniature integrated power monitors are designed for channel monitoring
in dense wavelength division multiplexing (DWDM) systems and Add/Drop
modules. They can also be used for signal/pump power monitoring in erbium
doped fiber amplifiers (EDFAs) and Raman amplifiers where integrated solutions
tend to replace traditional fused fiber tap + photodiodes. The miniaturized
version is a high performance active hybrid device that incorporates a micro-optic
tap coupler and high-sensitivity InGaAs photodiode in a miniature package. It
offers high reliability, compact footprint with ultra-wide bandwidth, and very low
polarization dependent loss (PDL).
NORTH AMERICA
:
800 498-JDSU (5378)
WORLDWIDE
:
+800 5378-JDSU
WEBSITE
:
www.jdsu.com
MINIATURE INTEGRATED POWER MONITOR
2
IPM Single Unit Diagram
(Specifications in mm unless otherwise noted.)
20.1 MAX
18.35
7.0 MAX
Ø 3.20
0.50 X 0.50
Ø 0.50
PITCH 2.54
IPM Array (6 to 8 channels) Diagram
(Specifications in mm unless otherwise noted.)
32.00
3.20
PITCH 2.54 X 11
=27.94
3.0
Ø 0.51
Ø 1.14
PIN 1
27.94
32.50
22.86
6.00
IPM Array Pinout
(8 channel only)
BOTTOM VIEW
Pin
1
2
3
4
5
6
7
8
9
10
11
12
Description
Anode (Common)
Cathode 1
Cathode 2
Anode (Common)
Cathode 3
Cathode 4
Cathode 5
Anode (Common)
Cathode 6
Cathode 7
Anode (Common)
Cathode 8
MINIATURE INTEGRATED POWER MONITOR
3
Specifications
Parameter
Wavelength range
C-Band
L-Band
C+L Band
Insertion loss (input to output)
Wavelength flatness (input to output)
Polarization dependent loss (input to output)
PMD (input to output)
Optical return loss
PD operating bias voltage, V
R
PD responsivity
PD linearity
PD dark current
PD cut-off frequency
Input optical power
Operating temperature
Storage temperature
Tensile load
Package dimensions
Single unit
6 to 8 channels array
10 channels array
Fiber type
Pigtail color code
Specification
Maximum
Maximum
Maximum
Maximum
Minimum
Minimum
Maximum
Maximum
Maximum
1510-1580 nm
1560-1625 nm
1510-1625 nm
See table below
0.002 dB/nm
0.03 dB
0.1 ps
45 dB
-5 V (typical)
0.8 A/W (for net responsivity, see table below)
±10%
1 nA @ V
R
= -5 V and 23 °C
600 MHz @ V
R
= -5 V and R
L
= 50 W
See table below
-20 to 75 °C
-40 to 85 °C
5N
3.2 mm x 18.5 mm
32 mm x 32.5 mm x 6 mm
38.8 mm x 32.5 mm x 6 mm
SMF-28, 250 µm primary coating
Black (input port); Clear (output port)
Note: Parameters are specified for the signal wavelength range, all polarization states, and operating temperature range without connector unless otherwise stated.
Tap Ratio and Insertion Loss Table
Code
Tap Ratio
Maximum Insertion Loss
(Input to Output)
0.5 dB
0.5 dB
0.5 dB
0.5 dB
0.6 dB
0.8 dB
Minimum Net Responsivity
1
Maximum Optical Power
2
1
2
3
4
5
T
1%
2%
3%
4%
5%
10%
0.008 A/W
0.016 A/W
0.024 A/W
0.032 A/W
0.040 A/W
0.080 A/W
500 mW
250 mW
150 mW
125 mW
100 mW
50 mW
1. The net responsivity is defined as the ratio of the PD current output and optical power measured at output fiber.
2. The maximum optical power is the maximum value of the power at input port within the PD linearity range specified.
MINIATURE INTEGRATED POWER MONITOR
Ordering Information
For more information on this or other products and their availability, please contact your local JDSU account manager or
JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at
customer.service@jdsu.com.
Sample: IPM-C82310010
IPM-
Code
C
L
1
Wavelength
C-band
L-band
C + L bands
Code
1
2
3
4
5
T
Tap Ratio
1%
2%
3%
4%
5%
10%
Code
2
3
4
Package Size
Single
unit
6-8
channel
array
10-channel array
001
Code
0
1
2
3
4
5
8
9
A
B
C
Connector Type
No
connector
FC/PC
FC/SPC
FC/APC
SC/SPC
SC/APC
ST
FC/UPC
SC/UPC
LC/SPC
LC/UPC
Code
1
6
7
8
T
Channels
Single
device
6-channel array
7-channel array
8-channel array
10-channel array
Code
1
2
4
5
Fiber Length
1m
2m
0.5 m
1.5 m
SMF-28 is a registered trademark of Corning Incorporated.
ST is a registered trademark of Lucent Technologies.
All statements, technical information and recommendations related to the products herein are based upon information believed to be
reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any
inaccuracies. The user assumes all risks and liability whatsoever in connection with the use of a product or its application. JDSU reserves
the right to change at any time without notice the design, specifications, function, fit or form of its products described herein, includ-
ing withdrawal at any time of a product offered for sale herein. JDSU makes no representations that the products
herein are free from any intellectual property claims of others. Please contact JDSU for more information. JDSU and the JDSU logo are
[i=s]This post was last edited by MianQi on 2022-11-5 17:54[/i]Renesas' e studio is the fourth Eclipse-based IDE I have used. The previous three were: ST's STM32CubeIDE , TI's Code Composer Studio IDE...
[i=s]This post was last edited by cruelfox on 2020-4-19 08:46[/i] Although I can use the onboard ST-Link to debug the STM32MP157 through the SWD port, I encountered unexpected situations during the e...
Applications that require control of motors usually include some type of current sensing circuitry. The ability to sense the current through the motor can help designers make adjustments such as speed...
I used the T0 timer to write the water lamp back and forth, but only one lamp is on and the water does not flow. I don’t know what the problem is. Can you help me analyze it and see where I went wrong...
The development of an industry not only depends on the power gathering within the industry, but more often it needs a suitable social and economic environment to give it opportunities. Our barcode ind...
I learned microcontroller by myself, bought a development board, and entered the third stage of learning: 8-bit common cathode digital tube. I just came into contact with the use of latches, and wrote...[Details]
Working Principle of Photo-controlled Thyristor
When a positive voltage is applied to the anode of the photo-controlled thyristor and a negative voltage is applied to the cathode, ...[Details]
Curved screens are often used in high-end flagships such as the Galaxy S21 Ultra, OPPO Find X3 series, OnePlus 9 Pro, etc. It is undeniable that curved screens have a better visual experienc...[Details]
As the intermediate connector between the oscilloscope and the object under test (DUT), the oscilloscope probe plays an important role in oscilloscope testing. A good probe and measurement method...[Details]
China Energy Storage Network:
Deepening power system reform and building a new power system with new energy as the main body are major decisions and deployments made by the Party Central Co...[Details]
The s3c6410 has two USB instances (both are brought out on the board), namely USB host and USB OTG. Here we are talking about USB host Code : https://github.com/lisider/linux/tree/ok6410a-linux-5.11...[Details]
High-frequency current probes are mainly used for measurements of floating systems. In power system testing, it is often required to measure the relative voltage difference between the live wire a...[Details]
/*
Jumper setting: default jumper position, note that the buzzer selection jumper J5 should be selected at terminal 23
Program effect: Use the timer/counter of the microcontroller to design...[Details]
Did you know that the 1.4TSI engine can use stratified combustion at low temperatures to achieve high-pressure stratified starting? Did you know that the intake system of the 1.4TSI engine also has va...[Details]
In the past two days, I studied the CRC algorithm at home because I needed to verify the data read by DS18B20 with AVR. I learned some methods on the Internet and finally figured it out. I wrote it i...[Details]
Since the chiplet technology was widely publicized by Intel and AMD and successfully introduced, the technology has been constantly hyped and well-known in the past two years. During ICCAD 2019, Dai ...[Details]
At this CES, Yanfeng released the innovative sound flow cockpit CYMATICX™, a physical product that breaks through the interior space and brings an immersive cockpit audio experience. CYMATICX™ is ...[Details]
Measurement principle of X-ray thickness gauge The principle of X-ray thickness gauge is to convert and measure the thickness according to the intensity attenuation of X-rays when they penetrate ...[Details]
The new AD9250 dual-channel 14-bit, 250 MSPS ADC interfaces seamlessly with high-speed FPGAs through JESD204B-compliant outputs and supports precision multichannel converter synchronization.
B...[Details]
Renesas Electronics MCUs
京公网安备 11010802033920号
EEWORLD
