-
Make AGV/AMR faster charging, longer battery life and safer.
Just as some people are anxious about battery life, the charging problem of AGV/AMR has also been a concern.
Nowadays, AGV...[Details]
-
The Linux kernel uses the timer_list structure as a timer.
#include "linux/timer.h"
#include "linux/module.h"
MODULE_LICENSE("GPL");
// Without this sentence, al...[Details]
-
Although high-power LEDs cannot replace traditional lighting fixtures on a large scale, they are increasingly widely used in indoor and outdoor decoration and special lighting. Therefore, maste...[Details]
-
As converter resolution and speed increase, the need for more efficient digital side interfaces also grows. Currently, analog-to-digital converters ( ADCs ) are undergoing a transition from parallel ...[Details]
-
Dual-channel memory technology is actually a memory control and management technology. It relies on the chipset's memory controller to work. In theory, it can double the bandwidth provided by two memo...[Details]
-
The demands on power supply designers are becoming higher and higher, and they are under tremendous pressure to improve efficiency, reduce costs, and shorten product development cycles. Power supply ...[Details]
-
TE Connectivity new product: MAG-MATE terminal with spring pin, ideal solution for multi-layer PCB board connection
For motor designers and manufacturers, performance, cost and reliabili...[Details]
-
Principle and production of sound and light controlled delay switch
Use the sound and light controlled delay switch to replace the switch on the corridor of the residential area. Only after dark, w...[Details]
-
When calling the following SPI function during debugging, the following two problems were found: 1. If you set a breakpoint at the third line while (SPI_I2S_GetFlagStatus(SPI2, SPI_I2S_FLAG_RXNE) =...[Details]
-
Since the official merger of ams Semiconductor and OSRAM in March this year, the first media roundtable exchange meeting of the first year of the merger of ams OSRAM was held recently. Automotive El...[Details]
-
Oscilloscope probes have two wires, one for connecting the test circuit to the vertical amplifier of the oscilloscope (called the sense wire) and the other for connecting the oscilloscope chassis...[Details]
-
This article will introduce the basic clock of STM32 and control the on and off of LED lights through clock interrupts. The general idea of this article is as follows: 1. Initialize the GPIO po...[Details]
-
introduction
At present, the widespread application of power electronic devices and nonlinear devices has caused the voltage and current waveforms in the power grid to be distorted, and th...[Details]
-
【Speed measurement module】 Module information I am using a narrow slot type optocoupler speed measurement module, as shown below: wiring 1. VCC connects to the positive pole of the power suppl...[Details]
-
Infineon Technologies will showcase innovative solutions in the fields of environmentally friendly, safe and intelligent transportation, as well as green and smart living spaces
Inf...[Details]