CJ-series Mixed I/O Units
CJ1W-MD
CSM_CJ1W-MD_DS_E_9_7
A Wide Range of Basic
Mixed I/O Units for Different
Applications and Wiring
Methods
• One Mixed I/O Unit has connectors for both
inputs and outputs. Use Mixed I/O Units to
easily build space-saving systems.
CJ1W-MD231
CJ1W-MD261
CJ1W-MD563
Features
•
Select the best interface for each application: Fujitsu connectors and MIL connectors.
•
Select sinking outputs or sourcing outputs. The CJ1W-MD232 has load short-circuit protection.
•
The ON and OFF response times can be set to between 0 and 32 ms in the Setup in the CPU Unit.
•
Mixed I/O Units with 5-V TTL inputs are also available. *
•
A wide variety of Connector-Terminal Block Conversion Units are available to allow you to easily wire external I/O devices.
* Applies to the CJ1W-MD563.
1
CJ1W-MD
Ordering Information
International Standards
•
The standards are abbreviated as follows: U: UL, U1: UL (Class I Division 2 Products for Hazardous Locations), C: CSA, UC: cULus,
UC1: cULus (Class I Division 2 Products for Hazardous Locations), CU: cUL, N: NK, L: Lloyd, and CE: EC Directives.
•
Contact your OMRON representative for further details and applicable conditions for these standards.
Mixed I/O Units
Specifications
Unit type
Product
name
Input voltage,
Input current
Maximum switching
capacity
24 VDC, 7 mA
250 VAC/24 VDC,
0.5 A
24 VDC, 7 mA
Current
consumption
(A)
No. of
words
allocated
Model
5V
24 V
Standards
Output
type
I/O points
External
Commons
connection
16 points,
1 common
16 points,
1 common
16 points,
1 common
16 points,
1 common
16 points,
1 common
16 points,
1 common
16 points,
1 common
16 points,
1 common
16 points,
1 common
16 inputs
Sinking
DC Input/
Transistor
Output
Units
Sinking
16 outputs
16 inputs
Fujitsu
connector
2 words
0.13
−
CJ1W-MD231
UC1, N,
CE
16 outputs 12 to 24 VDC, 0.5 A
32 inputs
Sinking
32 outputs 12 to 24 VDC, 0.3 A
CJ1
Basic
I/O Units
32 inputs
Sinking
32 outputs 12 to 24 VDC, 0.3 A
16 inputs
Sourcing
24 VDC, 7 mA
24 VDC, 4.1 mA
24 VDC, 4.1 mA
MIL
connector
2 words
0.13
−
CJ1W-MD233
Fujitsu
connector
4 words
0.14
−
CJ1W-MD261
UC1, N,
CE
MIL
connector
4 words
0.14
−
CJ1W-MD263
24 VDC, 0.5 A
16 points,
16 outputs
Short-circuit protection 1 common
32 inputs
5 VDC, 35 mA
16 points,
1 common
MIL
connector
2 words
0.13
−
CJ1W-MD232
UC1, N, L,
CE
TTL I/O
Units
−
MIL
connector
32 outputs 5 VDC, 35 mA
16 points,
1 common
4 words
0.19
−
CJ1W-MD563
UC1, N,
CE
Accessories
Connectors are not included for models with connectors. Either use one of the applicable connector listed below or use an applicable Connector-
Terminal Block Conversion Unit or I/O Relay Terminal. For details on wiring methods, refer to
External Interface.
Applicable Connectors
Fujitsu Connectors for 32-input, 32-output, 64-input, 64-output, 32-input/32-output, and 16-input/16-output Units
Name
Connection
Soldered
40-pin
Connectors
Crimped
Pressure welded
Soldered
24-pin
Connectors
Crimped
Pressure welded
Remarks
FCN-361J040-AU
FCN-360C040-J2
FCN-363J040
FCN-363J-AU
FCN-360C040-J2
FCN-367J040-AU/F
FCN-361J024-AU
FCN-360C024-J2
FCN-363J024
FCN-363J-AU
FCN-360C024-J2
FCN-367J024-AU/F
Connector
Connector Cover
Socket
Contactor
Connector Cover
Fujitsu Connectors:
CJ1W-MD231 (16 inputs, 16 outputs): 2 per Unit
Connector
Connector Cover
Housing
Contactor
Connector Cover
Applicable Units
Fujitsu Connectors:
CJ1W-ID231(32 inputs): 1 per Unit
CJ1W-ID261 (64 inputs): 2 per Unit
CJ1W-OD231 (32 outputs): 1 per Unit
CJ1W-OD261 (64 outputs): 2 per Unit
CJ1W-MD261 (32 inputs, 32 outputs): 2 per Unit
Model
C500-CE404
C500-CE405
C500-CE403
C500-CE241
C500-CE242
C500-CE243
−
Standards
MIL Connectors for 32-input, 32-output, 64-input, 64-output, 32-input/32-output, and 16-input/16-output Units
Name
Connection
Pressure welded
40-pin
Connectors
Crimped
20-pin
Connectors
Pressure welded
Crimped
−
FRC5-AO20-3TOS
−
Remarks
FRC5-AO40-3TOS
Applicable Units
MIL Connectors:
CJ1W-ID232 (32 inputs): 1 per Unit
CJ1W-OD232/233 (32 outputs):1 per Unit
CJ1W-ID262 (64 inputs): 2 per Unit
CJ1W-OD262/263 (64 outputs): 2 per Unit
CJ1W-MD263/563 (32 inputs, 32 outputs): 2 per Unit
MIL Connectors:
CJ1W-MD232/233 (16 inputs, 16 outputs): 2 per Unit
Model
XG4M-4030-T
−
XG5N-401*
XG4M-2030-T
XG5N-201*
−
Standards
* Crimp Contacts are also required. Refer to page 20 for details.
2
CJ1W-MD
Applicable Connector-Terminal Block Conversion Units
Type
Series
Number
of poles
Wiring
method
Size
Mounting
Terminal
Common Bleeder
Indicators
Depth Height Width DIN
type
Screws terminals resistance
(mm) (mm) (mm) Track
50
Phillips screw
M3
34
50
48.05 130.7
CJ1W-MD263
CJ1W-MD563
48.05 81.7
I/O Units
Model *
Standards
20
CJ1W-MD231
CJ1W-MD232
XW2R-J20GD-T
CJ1W-MD233
CJ1W-MD261
XW2R-J34GD-C1
XW2R-J34GD-C3
XW2R-J34GD-C2
XW2R-J34GD-C4
XW2R-J34GD-C2
XW2R-J34GD-C4
20
Slotted screw
(rise up)
50
48.05 81.7
CJ1W-MD231
CJ1W-MD232
XW2R-E20GD-T
CJ1W-MD233
CJ1W-MD261
Yes
−
No
No
No
CJ1W-MD263
CJ1W-MD563
XW2R-E34GD-C1
XW2R-E34GD-C3
XW2R-E34GD-C2
XW2R-E34GD-C4
XW2R-E34GD-C2
XW2R-E34GD-C4
―
General-
purpose XW2R
devices,
34
PLC
M3
(European
type)
50
44.81 98.5
20
Push-in
spring
Clamp
34
50
48.05 81.7
CJ1W-MD231
CJ1W-MD232
XW2R-P20GD-T
CJ1W-MD233
CJ1W-MD261
XW2R-P34GD-C1
XW2R-P34GD-C3
XW2R-P34GD-C2
XW2R-P34GD-C4
XW2R-P34GD-C2
XW2R-P34GD-C4
50
44.81 98.5
CJ1W-MD263
CJ1W-MD563
Note:
For the combination of Input Units with Connector-Terminal Block Conversion Units, refer to
2. Connecting Connector-Terminal Block
Conversion Units.
* Representative models only. For details, refer to the XW2R series catalog (Cat. No. G077).
3
CJ1W-MD
Connecting Cables for Connector-Terminal Block Conversion Units
Appearance
Connectors
0.5
1
XW2Z-@@@A
1.5
2
One 24-pin Fujitsu Connector to
One 20-pin MIL Connector
3
5
7
10
15
20
XW2Z-@@@X
0.5
1
One 20-pin MIL Connector to
One 20-pin MIL Connector
2
3
5
10
XW2Z-@@@PF
0.5
1
One 40-pin Fujitsu Connector to
One 40-pin MIL Connector
1.5
2
3
5
XW2Z-@@@PM
0.5
1
One 40-pin MIL Connector to
One 40-pin MIL Connector
1.5
2
3
5
Cable lenght [m]
Model
XW2Z-050A
XW2Z-100A
XW2Z-150A
XW2Z-200A
XW2Z-300A
XW2Z-500A
XW2Z-700A
XW2Z-010A
XW2Z-15MA
XW2Z-20MA
XW2Z-C50X
XW2Z-100X
XW2Z-200X
XW2Z-300X
XW2Z-500X
XW2Z-010X
XW2Z-050PF
XW2Z-100PF
XW2Z-150PF
XW2Z-200PF
XW2Z-300PF
XW2Z-500PF
XW2Z-050PM
XW2Z-100PM
XW2Z-150PM
XW2Z-200PM
XW2Z-300PM
XW2Z-500PM
4
CJ1W-MD
Applicable I/O Relay Terminals
Specifications
Type
Series
Classification
Polarity
NPN
G70V
Inputs
DC
inputs
PNP
NPN
PNP
NPN
Outputs
Relay
outputs
PNP
NPN
PNP
AC
inputs
Inputs
G7TC
Standard
Relay
outputs
NPN
DC
inputs
NPN
16
(SPSTNO
×
16)
1A
100/(110) VAC
200/(220) VAC
12 VDC
24 VDC
100/110 VDC
8
(SPSTNO
×
8)
16
(SPSTNO
×
16)
16
(SPSTNO
×
16)
5A
12 VDC
24 VDC
12 VDC
24 VDC
12 VDC
24 VDC
110 VDC
max., 240
100 mA
VAC max.
*2
182
102
85
68
Yes
No
182
16
(SPDT
×
16)
6 A/point,
10 A/
common
16
(SPSTNO
×
16)
50 mA
24 VDC
143
90
56
Yes
Yes
Number
of points
Rated ON
current at
contacts
Rated
voltage
Size (horizontal mounting)
Horizontal Vertical Height
(mm)
(mm)
(mm)
Mounting
DIN
Screws
Track
Model
G70V-SID16P *4
G70V-SID16P-1 *4
G70V-SID16P-C16 *5
G70V-SID16P-1-C16 *5
UC, CE
(TÜV
G70V-SOC16P *4
certified)
G70V-SOC16P-1 *4
G70V-SOC16P-C4 *6
G70V-SOC16P-1-C4 *6
G7TC-IA16 AC100/110
G7TC-IA16 AC200/220
G7TC-ID16 DC12
G7TC-ID16 DC24
G7TC-ID16 DC100/110
G7TC-OC08 DC12
G7TC-OC08 DC24
G7TC-OC16 DC12
G7TC-OC16 DC24
G7TC-OC16-1 DC12
G7TC-OC16-1 DC24
G70A-ZOC16-5
234
75
64
Yes
No
U, C, CE
(VDE
certified)
U, C
Standards
Push-In
Plus
terminal
block
Outputs
PNP
G70A *1
(Socket only)
High-
capacity
socket
Relay
inputs
NPN/
PNP
NPN
PNP
Inputs
Relay
Outputs
outputs
Vertical type
G70D-V
Relay
outputs
16
(SPDT
×
16
possible with 10 A (Ter-
G2R Relays) minal
block al- 24 VDC
lowable
5A
or 3 A *3
16
(SPSTNO
×
16)
G70A-ZOC16-3
G70A-ZOC16-4
G70D-VSOC16
MOSFET NPN
relay
outputs
Space-
saving
Flat type
G70D
135
0.3 A
46
81
Yes
Yes
G70D-VFOM16
U, C, CE
(VDE
certified)
Outputs
Relay
outputs
NPN
8
5A
(SPSTNO
×
8)
16
(SPSTNO
×
16)
16
(SPSTNO
×
16)
16
(SPSTNO
×
16)
3A
3A
0.3 A
24 VDC
68
93
44
G70D-SOC08
G70D-SOC16
Yes
Yes
PNP
MOSFET NPN
relay
PNP
outputs
High-
capacity,
space-
saving
G70R
Outputs
Relay
outputs
NPN
156
51
39
G70D-SOC16-1
G70D-FOM16
G70D-FOM16-1
−
8
10 A
(SPSTNO
×
8)
24 VDC
136
93
55
Yes
Yes
G70R-SOC08
−
*1. G70A is a I/O terminal socket product. Relay is not provided with the socket. Be sure to order a relay, timer separately.
*2. Each relay to be mounted must incorporate a coil that has proper specifications within the maximum rated voltage range.
*3. Eight or fewer points ON: 5 A, Nine or more points ON: 3 A.
*4. Internal common at terminal block: No internal connections
*5. Internal common at terminal block: Internal IO common 16 points internally connected
*6. Internal common at terminal block: Every 4 points internally connected at terminal block middle row.
Note: 1.
For the combination of Input Units with I/O Relay Terminal and Connecting Cables, refer to
3. Connecting I/O Relay Terminals.
2.
Please refer to each Datasheet about details.
3.
When the G7TC is used with an AC rated voltage, three rated currents can be used. If a coil voltage of 110 or 220 VAC is used, 50 Hz
cannot be used.
5
stm32/stm8
京公网安备 11010802033920号
EEWORLD
