I need to use 28335 to store data (transfer function array), and I need to use this data multiple times after power-on, or even modify it and store it. So I have the following thoughts:
1. Store it in...
The circuit I designed using the BL9582B design manual is as follows:
The difference between the picture and the manual is: an optocoupler is added, which may affect the smoothness of the PWM. There s...
[i=s] This post was last edited by z45217 on 2018-6-28 15:15 [/i] I want to add a process edge at the bottom of this board. Is it okay to do it like the picture below? The lower left corner is missing...
[i=s]This post was last edited by jinglixixi on 2021-2-1 00:02[/i]In the previous introduction, the routine was analyzed accordingly and the method of program migration based on the STM32F411 developm...
I use Qinheng's ch582 chip. I have implemented a network adapter according to the BLE-Mesh networking routine. The two relay nodes are successfully networked, but I want to realize the communication b...