The WMS712x is a 64 non-volatile linear digital potentiometers available in 10KΩ, 50KΩ and 100KΩ
resistance values. The WMS7120/1 can be used as a three-terminal potentiometer or as a two
terminal variable resistor in a wide variety of applications.
The output of each potentiometer is determined by the wiper position, which varies in linearly between
V
A
and V
B
terminal according to the content stored in the volatile Tap Register (TR) which is
programmed through Up/Down (Increment/Decrement) interface. The channel has one non-volatile
memory location (NVMEM0) that can be directly written to by users through the Up/Down interface.
Power-on recall is also built in so the content of the NVMEM0 to Tap Register is automatically loaded.
The WMS7120/1 devices pin out the resistor wiper directly. The WMS7121 devices feature an output
buffer with 3mA minimum drive capability.
All the WMS7120/1 devices are single channel devices offered in 8-pin PDIP, SOIC and MSOP
packages. The WMS7120/1 devices operate over a wide operating voltage ranging from 2.7V to
5.5V.
2. FEATURES
•
•
•
•
•
•
•
•
•
•
•
•
•
Drop-in replacements for many popular parts
Available output buffer for WMS7121 devices
Single linear-taper channel
64 taps
10K, 50K and 100K end-to end resistance
V
SS
to V
DD
terminal voltages
Non-volatile storage of wiper positions with power-on recall
Data storage and potentiometer control through Up/Down (3-wire) interface
Endurance 100,000 write cycles
Data retention 100 years
Package options:
o
8-pin PDIP, SOIC or MSOP
Industrial temperature range: -40° ~ 85°C
Single supply operation 2.7V to 5.5V
-2-
WMS7120/1
3. BLOCK DIAGRAM
Tap Register
V
A
INC
CS
U/D
Up/Down
Serial
Interface
Decoder
V
W
V
B
NV Memory
V
SS
NV Memory
Control
NVMEM0
V
DD
FIGURE 1 – WMS7120 BLOCK DIAGRAM (Rheostat Mode)
Tap Register
V
A
INC
CS
U/D
Up/Down
Serial
Interface
Decoder
V
W
V
B
NV Memory
V
SS
NV Memory
Control
NVMEM0
V
DD
FIGURE 2 – WMS7121 BLOCK DIAGRAM (Divider Mode)
-3-
Publication Release Date: April 21, 2005
Revision 1.1
WMS7120/1
4. TABLE OF CONTENTS
1. GENERAL DESCRIPTION.................................................................................................................. 2
2. FEATURES ......................................................................................................................................... 2
As shown in Figure (01), there are two batteries and a resistor in series. In this circuit, does battery E1 charge battery E2, or does battery E2 charge battery E1?Figure (01) Let's measure voltage U...
BQ25618 /9 is a three-in-one (protection, charging and boost) IIC control switch charging chip specially developed by TI for TWS earphone charging case.
BQ25618 and BQ25619 have the same specification...
Spectroscopy is a powerful technique for identifying and characterizing physical substances through changes in the amount of light absorbed or emitted at different wavelengths. Spectroscopy requires t...
[i=s]This post was last edited by qwqwqw2088 on 2018-11-8 10:17[/i] [size=4]Maximum Rated Parameters[/size] [align=center][size=4][/size][/align][size=4] [/size] [size=4]Maximum Rated Parameters, all ...
On December 2, the "big bosses" of three leading listed silicon carbide companies - Li Hong, President of China Resources Micro, Zhao Qi, General Manager of Xinlian Integration, and Zong Yanmin, Chai...[Details]
1. Determination of STM32 ADC sampling frequency 1. First, read some information to determine the ADC clock: (1) The ADCCLK clock provided by the clock controller is synchronized with the PCLK2 (A...[Details]
OPPO Vice President Shen Yiren revealed the new products in the OPPO Reno series. Shen Yiren said that the new OPPO Reno not only has a _ Hz screen, but also an upgraded version of _W Super F...[Details]
As consumers continue to adopt Internet of Things (IoT) solutions to connect in-home devices to external and internal networks, smart speakers will become more common in more homes. In fact, the smar...[Details]
AMD will upgrade to the 5nm Zen4 architecture next month. Including the transitional Zen+ architecture, AMD has launched 5 generations of Zen architecture from 2017 to now. The process has been upgra...[Details]
I. Introduction For the field of industrial automation, a large number of intelligent devices can be connected to the Internet through various channels, and information and data can be transmitted ...[Details]
On the evening of September 3, Faraday Future (FF) officially announced that Dr. Carsten Breitfeld joined the company as global CEO, while the former CEO and founder of the company, Jia Yueting, will...[Details]
1 LC Resonance Amplifier Principle
As shown in Figure 1, it is a principle circuit of a high-frequency power amplifier using transistors. In addition to the bias circuit and power supply, it is m...[Details]
This article uses the following environment: Main control: W801 (development board) Compatible with: W800 AIR101 Software: CDK W801 Bluetooth data transmission and reception and control design (I) ...[Details]
As the "heart" of electric vehicles , the performance of power batteries directly affects the driving conditions of vehicles. It is no exaggeration to say that electric vehicles are "made or broken b...[Details]
Image source: Johann Kepler University Linz Austrian scientists have used the skin of mushrooms to create substrates for computer chips and batteries. Their electrical conductivity is almost equa...[Details]
Advantages and Disadvantages of Target Flowmeter Target flow meters currently have two measurement forms: basic type and integrated temperature and pressure compensation type. The basic type can ...[Details]
Today we will use a programming example to explain in detail how to create and use FB and FC with parameters. I hope everyone can grasp the knowledge points explained in the article.
【Ca...[Details]
Mitsubishi PLC (Programmable Logic Controller) is a control device widely used in the field of industrial automation. It has the characteristics of flexible programming, powerful functions, high re...[Details]