PE60
Vishay Sfernice
Power Panel Potentiometer
FEATURES
•
High power rating (6 W at 50 °C)
•
Cermet element
•
Full sealing
•
Mechanical strength
•
Industrial and professional grade
•
Tests according to CECC 41 000
RoHS
COMPLIANT
DIMENSIONS
in millimeters
PE 60 L
FR = 50 (1.969)
150
(5.872) Min
Ø 25
8
18
(0.709) FG = 16
(0.630)
FL = 25
(0.984)
150
(5.872) Min
PE 60 F
GR = 50.8 (2)
18
(0.709) GB = 12.7
(1/2)
GJ = 22.22
(7/8)
Slot 1 x 1.8 deep
(0.039 x 0.071)
Ø 6.35
(0.250)
Ø6
(0.236)
Slot 1 x 1.8 deep
Thread M 10 x 75 (0.039 x 0.071)
12
(0.472)
wrench = 14
(0.551)
9.52
(3/8)
Thread 3/8 32-UNEF-2A
wrench = 12.5
(0.492)
OPTION D: DBAN SHAFT LOCKING
wrench = 14 (0.551)
wrench = 12 (0.472)
Ø6
(0.236)
OPTION L: PE 60 LPRP - WITH LOCATING PEG
3 (0.118)
0.8 (0.031)
12.5
(0.492)
9.2
(0.362)
Ø 1.8
(0.071)
6.5 (0.256)
15
(0.591)
Available only with PE 60 L
3 (0.118)
Available on PE 60 L and PE 60 F
2.3 (0.091)
Panel sealed version
PE 60 M
OPTION E: Including locating peg (available only for PE 60 M)
8 ± 0.2
(0.315 ±
Ø 1.2 0.008)
(0.047)
21 (0.825)
0.7 (0.028)
9 (0.356)
Flat Located
Ø6
(0.236)
CIRCUIT DIAGRAM
Yellow
(1)
Green
(3)
CW
(2) Red
Ø 10.5
(0.413)
Sealing ring
FD = 13 (0.514)
FJ = 22 (0.868)
FP = 47 (1.852)
Available only
with bushing
M10 x 0.75 and shafts Ø 6 mm
www.vishay.com
134
For technical questions, contact: sfer@vishay.com
See also: Application notes
Document Number: 51005
Revision: 05-Jun-08
PE60
Power Panel Potentiometer
Vishay Sfernice
SPECIAL FEATURES
COMMAND SHAFT
Length is measured from the mounting surface to the free
end of the shaft. The screwdriver slot is aligned with the
wiper within ± 10°. Special shafts are available, in
accordance to drawings supplied by customers. We
recommend that customers should not machine shafts, in
order to avoid damage.
SHAFT LOCKING: DBAN
The shaft locking device consists of a tapered nut tightening
a slotted notched washer against both bushing and shaft.
DBAN tightening torque is 200 Ncm, shaft locking torque
being 30 Ncm.
DBAN is also available with all special types.
This device is normally supplied in a separate bag. Can be
pre-mounted on request.
PANEL SEALING: PE60M
The panel sealing device consists of a ring located in a slot
on the potentiometer face. Sealing is obtained by tightening
the ring against the panel when mounting the potentiometer.
LOCATING PEG: LPRP
Location is obtained by fitting a special washer on the
potentiometer face. The peg can therefore be positioned at
90°, 180°, 270° and 360°.
ELECTRICAL SPECIFICATIONS
Resistive Element
Electrical Travel
Resistance Range
Standard series E3
Tolerance
Power Rating
Temperature Coefficient
Limiting Element Voltage (Linear Law)
Contact Resistance Variation (Linear Law)
End Resistance (Typical)
Dielectric Strength (RMS)
Insulation Resistance (500 VDC)
Standard
On Request
Linear
Logarithmic
Linear Law
Logarithmic Laws
cermet
270° ± 10°
1
Ω
to 1 MΩ
100
Ω
to 2.2 MΩ
1 - 2 - 2.5 - 5
± 20 %
± 10 % - ± 5 %
6 W at + 50 °C
3 W at + 50 °C
see Standard Resistance Element Data
350 V
3 % Rn or 0.5
Ω
0.5
Ω
or 1 %
2500 V
10
6
MΩ
MECHANICAL SPECIFICATIONS
Mechanical Travel
Operating Torque (max. Ncm)
End Stop Torque (max. Ncm)
Max Tightening Torque
of Mounting Nut (Ncm)
Unit Weight (max.
g)
250
25 to 35
300° ± 5°
3 typical
70
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
Climatic Category
Sealing
- 55 °C to + 125 °C
55/125/56
fully sealed
container IP67
POWER RATING CHART
6
LIN. LAW “A”
RESISTANCE LAWS
100
% TOTAL RESISTANCE
80
F
60
A
L
40
POWER IN W
LOG. LAWS “L & F”
3
20
0
0
0
20
40
60
70
80
100
125
140
0
20
40
60
80
100
AMBIENT TEMPERATURE IN °C
% CLOCKWISE SHAFT ROTATION
Document Number: 51005
Revision: 05-Jun-08
For technical questions, contact: sfer@vishay.com
See also: Application notes
www.vishay.com
135
PE60
Vishay Sfernice
PERFORMANCE
TYPICAL VALUES AND DRIFTS
TESTS
CONDITIONS
Phase A dry heat 125 °C
Phase B damp heat
Phase C cold - 55 °C
Phase D damp heat 5 cycles
56 days
25 000 cycles
1000 hours at rated power
90’/30’ - ambient temp. 25 °C
5 cycles
- 55 °C at + 125 °C
50 g at 11 ms
3 successive shocks
in 3 directions
10 - 55 Hz
0.75 mm or 10 g
during 6 hours
ΔRT
(%)
RT
± 0.5 %
± 0.5 %
Insulation resistance: > 10
4
MΩ
±3%
Contact res. variation: < 5 % Rn
±3%
Contact res. variation: < 3 % Rn
± (0.5 % ± 0.1
Ω)
± 0.1 %
± 0.2 %
ΔR
1-2
(%)
R
1-2
±1%
±1%
Power Panel Potentiometer
Climatic Sequence
Long Term Damp Heat
Rotational Life
Load Life
Rapid Temperature Change
Shock
Vibration
± 0.1 %
± 0.2 %
STANDARD RESISTANCE ELEMENT DATA
STANDARD
RESISTANCE
VALUES
Ω
1
2
5
10
20
25
50
100
200
250
500
1K
2K
2.5K
5K
10K
20K
25K
50K
100K
200K
250K
500K
1M
6
4.90
2.45
1.23
0.61
0.49
0.25
0.12
350
LINEAR LAW
MAX.
POWER
AT 25 °C
W
6
MAX.
WORKING
VOLTAGE
V
2.4
3.5
5.5
7.7
11.0
12.2
17.3
24.5
34.6
38.7
54.8
77.5
110
122
173
245
346
350
TYPICAL
TCR
MAX. CUR.
THROUGH - 55 °C
+ 125 °C
WIPER
mA
2449
1732
1095
775
548
490
346
245
173.2
154.9
109.5
77.5
54.8
49.0
34.64
24.49
17.32
14.00
7.00
3.50
1.75
1.40
0.70
0.35
± 250
± 500
ppm/°C
MARKING
Printed:
- VISHAY trademark
- SAP Part number
- manufacturing date
PACKAGING
- in box of 5 pieces
www.vishay.com
136
For technical questions, contact: sfer@vishay.com
See also: Application notes
Document Number: 51005
Revision: 05-Jun-08
PE60
Power Panel Potentiometer
Vishay Sfernice
SAP ORDERING INFORMATION
(Part Number 18 digits)
P
E
6
0
L
0
F
G
W
2
0
4
M
A
MODEL
BUSHING
M = Panel
sealed
L = STD
F = 3/8"
OPTION
0 = none
For L Bushing
D = DBAN
L = LPRP
B = DBAN
and LPRP
For F Bushing
L = LPRP
SHAFT
For L Bushing
FG 16 mm, slotted
FL 25 mm, slotted
FR 50 mm, plain
For F Bushing
GB 1/2", slotted
GJ 7/8", slotted
GR 2", slotted
LEADS
W: Wire
OHMIC
VALUE
204 =
200 kΩ
TOLERANCE
± 20 %
on request
± 10 %
±5%
LAW
A = Linear
L = clockwise
logarithmic
F = clockwise
inverse
logarithmic
SPECIAL
NUMBER
(if applicable)
Given by
VISHAY
for custom
design
For M Bushing
For M Bushing FD = 13 mm, slotted
FJ = 22 mm, slotted
E = Peg
FP = 47 mm, plain
PART NUMBER DESCRIPTION
(for information only)
PE60
MODEL
L
BUSHING
0
OPTION
FG
SHAFT
W
LEADS
200 kΩ
OHMIC
VALUE
20
%
TOL
A
LAW
BO5
PACKAGING SPECIAL
SPECIAL
e4
LEAD
(Pb)-FREE
Document Number: 51005
Revision: 05-Jun-08
For technical questions, contact: sfer@vishay.com
See also: Application notes
www.vishay.com
137
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
京公网安备 11010802033920号
EEWORLD
