P30L
Vishay Sfernice
Long Life Potentiometer - 1 Million Cycles
Heavy Duty - Cermet
Fully Sealed
FEATURES
•
1 million cycles
•
High power rating (2 W at 70 °C)
•
Low temperature coefficient
(± 150 ppm/°C typical)
•
Custom designs on request
RoHS
COMPLIANT
DIMENSIONS
in millimeters (inches) ± 0.5 (± 0.02)
P30L
8
(0.31)
20 (0.79) max.
13 (0.51)
max.
12 (0.47)
14 Wrench
Thread M10 x 0.75
Ø6
(0.24)
a
76°
c
R 5.2
(0.20)
FG = 16 (0.63)
Ø 19.7
(0.78)
FL = 25 (0.99)
FR = 50 (1.97)
0.5
(0.02)
2.85 (0.11)
b
3
(0.12)
P30L: LPRP - Locating Peg
3
(0.12)
Ø 1.8 (0.07)
0.8
(0.3)
Ø 10.5
(0.41)
12.5
(0.49)
9.2
(0.36)
Ø 3.5
(0.14)
8.8
(0.35)
3
(0.12)
2.3
(0.9)
PANEL MOUNT
PE30LME: Panel Sealed
23 (0.91) max.
16 (0.63) max.
Ø 1.2
(0.05)
0.7 (0.03)
Ø 1 (0.4)
Flats
located
Ø6
(0.24)
Sealing Ring
8 ± 0.2
(0.31 ± 0.01)
Ø 10.5
(0.41)
Ø 19.7
(0.78)
9 (0.35)
FD = 13
(0.61)
FJ = 22 (0.87)
FP = 47 (1.85)
PANEL MOUNT
Document Number: 51056
Revision: 04-Sep-08
For technical questions, contact: sfer@vishay.com
www.vishay.com
1
P30L
Vishay Sfernice
Long Life Potentiometer - 1 Million Cycles
Heavy Duty - Cermet
Fully Sealed
Cermet
270° ± 10 °
1 kΩ - 5 kΩ - 10 kΩ - 50 kΩ
20 %
Linear
OUTPUT VOLTAGE RATIO (%)
100
80
60
40
20
ELECTRICAL SPECIFICATIONS
Resistive Element
Electrical Travel
Standard Resistance Values
Tolerance
A
CIRCUIT DIAGRAM
Varation Law
a
(1)
b
(2)
cw
c
(3)
A
0
0
20
40
60
80
100
% CLOCKWISE SHAFT ROTATION
LIN. LAW “A”
2
POWER IN W
Power Rating
2 W at 70 °C
1
0
0
20
40
60 70 80
100
120 140
AMBIENT TEMPERATURE IN °C
Resistance
Value
(kΩ)
Standard Resistance Element Data
1
5
10
50
Temperature Coefficient (Typical)
Limiting Element Voltage
Contact Resistance Variation
End Resistance (Typical)
Dielectric Strength (RMS)
Insulation Resistance (300 VDC)
Independent Linearity (Typical)
Max. Power
at 70 °C
(W)
2
2
2
1.8
± 150 ppm/°C
300 V
3 % Rn
1
Ω
2500 V
10
5
MΩ
±5%
Max. Working
Voltage
(V)
44.7
100
141
300
www.vishay.com
2
For technical questions, contact: sfer@vishay.com
Document Number: 51056
Revision: 04-Sep-08
P30L
Long Life Potentiometer - 1 Million Cycles
Heavy Duty - Cermet
Fully Sealed
MECHANICAL SPECIFICATIONS
Mechanical Travel
Operating Torque (Typical)
End Stop Torque
Tightening Torque of Mounting Nut
Unit Weight
Terminals
3 Ncm max.
70 Ncm max.
250 Ncm max.
23 to 32 g max.
e3: pure Sn
300° ± 5
4.25 oz.-inch max.
99 oz.-inch max.
22.13 lb-inch max.
0.8 to 1.13 oz.
Vishay Sfernice
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
Climatic Category
Sealing
- 40 °C to 100 °C
40/100/56
Fully sealed - Container IP67
OPTIONS
Special Feature Command Shaft
Length is measured from the mounting surface to the free end of the shaft. The screwdriver
slot is aligned with the wiper within ± 10°. Special shafts are available, in accordance to
drawings supplied by customers. We recommend that customers should not machine tool
shafts, in order to avoid damage. Bending or torsion of terminals should also be avoided.
The panel sealing device consists of a ring located in a groove on the potentiometer face.
Sealing is obtained by tightening the ring against the panel when mounting the potentiometer.
Location is obtained by fitting a special washer on the mounting face of the potentiometer.
Panel Sealing
Locating Peg
MARKING
•
VISHAY trademark
•
Model
•
Ohmic Value code
•
Tolerance code
•
Manufacturing date code
•
Marking of terminals 3, and a, b, c
APPLICATION NOTE
c (3)
The potentiometer shall be used in voltage divider with
an impedance load at least 100 times higher than the total
potentiometer nominal resistance value.
cw
Advised load impedance:
1 MΩ min. for resistance range of 1kΩ to 50 kΩ
(1) a
(2) b
1 MΩ min.
Document Number: 51056
Revision: 04-Sep-08
For technical questions, contact: sfer@vishay.com
www.vishay.com
3
P30L
Vishay Sfernice
Long Life Potentiometer - 1 Million Cycles
Heavy Duty - Cermet
Fully Sealed
PERFORMANCES
TESTS
CONDITIONS
Phase A dry heat 100 °C
Phase B damp heat
Phase C cold - 40 °C
Phase D damp heat 5 cycles
56 days
40 °C 93 % HR
1 000 000 cycles at rated power
Turn angle: ± 60°
33 cycles per minute
Temperature: 20 °C
1000 h at rated power
90'/30'
Ambient temperature 70 °C
5 cycles
- 40 °C at 100 °C
50 g at 11 ms
3 successive shocks
in 3 directions
10 - 55 Hz
0.75 mm or 10 g
during 6 h
ΔRT/RT
(%)
ΔR
1-2
/R
1-2
(%)
OTHER
Climatic Sequence
± 0.5 %
±1%
-
Long Term Damp Heat
± 0.5 %
±1%
Insulation resistance >
100 MΩ
Contact resistance
variation max. 35 %
Independent linearity
± 10 % (Typical)
Contact resistance
variation max. 30%
-
Rotational Life
± 20 %
-
Load Life
± 20 %
± 20 %
Rapid Temperature Change
± 0.5 %
-
Shock
± 0.1 %
± 0.2 %
-
Vibration
± 0.1 %
± 0.2 %
-
SAP ORDERING INFORMATION
(Part Number 18 digits)
P
3
0
L
L
0
F
D
R
1
0
3
M
A
MODEL
BUSHING
L=
M10 x 0.75
M = Panel
sealed
M10 x 0.75
OPTION
0 = None
E = With
Locating
Peg (for
M bushing
only)
L = LPRP
Diameter
F = Ø 6 mm
AP =
Custom
shaft
SHAFT
Length
For L Bushing
G = 16 mm
L = 25 mm
R = 50 mm
For M Bushing
D = 13 mm
J = 22 mm
P = 47 mm
End Shaft
Shape
R = Round
On request
S = Slotted
D = Custom
end shaft
F = Flatted
RESISTANCE CODE / TOLERANCE
CODE / TAPER
Ohmic Value
Tolerance
Variation
Law
A = linear
SPECIAL
NUMBER
(if applicable)
Given by
VISHAY
for custom
design
M = 20 %
102 = 1 kΩ
502 = 5 kΩ
103 = 10 kΩ On request
503 = 50 kΩ K = 10 %
PART NUMBER DESCRIPTION
(for information only)
P30L
MODEL
L
BUSHING
0
FDR
10K
20
%
A
TAPER
SPECIAL
BO10
PACKAGING
SPECIAL SPECIAL
e3
LEAD
(Pb)-FREE
OPTION SHAFT VALUE TOLERANCE
www.vishay.com
4
For technical questions, contact: sfer@vishay.com
Document Number: 51056
Revision: 04-Sep-08
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
京公网安备 11010802033920号
EEWORLD
