Toggle Switch, SPDT, (on)-off-(on), Horizontal, 7.5A, 28VDC, 5 PCB Hole Cnt, Solder Terminal, Toggle Bat Actuator, Through Hole-right Angle
Parameter Name | Attribute value |
Maker | ITT |
Reach Compliance Code | unknown |
ECCN code | EAR99 |
Actuator angle | 25 deg |
Executor completed | CHROME |
Actuator length | 0.5 inch |
Actuator material | BRASS |
Actuator type | TOGGLE BAT |
body width | 7.2136 mm |
body height | 30.4038 mm |
Body length or diameter | 12.7 mm |
Casing diameter | 0.24 inch |
Nozzle length | 0.25 inch |
Casing type | UNTHREADED |
center contact material | COPPER ALLOY |
Center contact plating | GOLD OVER NICKEL |
Contact (AC) maximum rated R load | 3A@250VAC |
Maximum contact current (AC) | 3 A |
Maximum contact current (DC) | 7.5 A |
Contact (DC) maximum rated power R load | 0.4VA@20VDC |
Contact (DC) maximum rated R load | 7.5A@28VDC |
Contact function | (ON)-OFF-(ON) |
Contact resistance | 0.01 mΩ |
Maximum contact voltage (AC) | 250 V |
Maximum contact voltage (DC) | 28 V |
Dielectric withstand voltage | 1000VRMS V |
Electrical life | 40000 Cycle(s) |
End contact material | SILVER |
End contact plating | GOLD OVER NICKEL |
Shell material | GLASS FILLED NYLON |
Insulation resistance | 1000000000 Ω |
insulator material | GLASS FILLED NYLON |
Manufacturer's serial number | E |
Installation features | THROUGH HOLE-RIGHT ANGLE |
Maximum operating temperature | 85 °C |
Minimum operating temperature | -30 °C |
PCB hole count | 5 |
seal | EPOXY |
Solderability | MIL-STD |
surface mount | NO |
Switch action | HORIZONTAL |
switch function | SPDT |
Switch type | TOGGLE SWITCH |
Terminal surface | GOLD/NICKEL |
Terminal length | 0.098 inch |
Terminal material | COPPER ALLOY |
Termination type | SOLDER |