• Extremely low wavelength dependent loss (WDL) and PDL
• Up to 10-channel arrays
Applications
• EDFA
• Raman amplifiers
• Add/Drop monitoring
• DWDM systems
JDSU miniature integrated power monitors are designed for channel monitoring
in dense wavelength division multiplexing (DWDM) systems and Add/Drop
modules. They can also be used for signal/pump power monitoring in erbium
doped fiber amplifiers (EDFAs) and Raman amplifiers where integrated solutions
tend to replace traditional fused fiber tap + photodiodes. The miniaturized
version is a high performance active hybrid device that incorporates a micro-optic
tap coupler and high-sensitivity InGaAs photodiode in a miniature package. It
offers high reliability, compact footprint with ultra-wide bandwidth, and very low
polarization dependent loss (PDL).
NORTH AMERICA
:
800 498-JDSU (5378)
WORLDWIDE
:
+800 5378-JDSU
WEBSITE
:
www.jdsu.com
MINIATURE INTEGRATED POWER MONITOR
2
IPM Single Unit Diagram
(Specifications in mm unless otherwise noted.)
20.1 MAX
18.35
7.0 MAX
Ø 3.20
0.50 X 0.50
Ø 0.50
PITCH 2.54
IPM Array (6 to 8 channels) Diagram
(Specifications in mm unless otherwise noted.)
32.00
3.20
PITCH 2.54 X 11
=27.94
3.0
Ø 0.51
Ø 1.14
PIN 1
27.94
32.50
22.86
6.00
IPM Array Pinout
(8 channel only)
BOTTOM VIEW
Pin
1
2
3
4
5
6
7
8
9
10
11
12
Description
Anode (Common)
Cathode 1
Cathode 2
Anode (Common)
Cathode 3
Cathode 4
Cathode 5
Anode (Common)
Cathode 6
Cathode 7
Anode (Common)
Cathode 8
MINIATURE INTEGRATED POWER MONITOR
3
Specifications
Parameter
Wavelength range
C-Band
L-Band
C+L Band
Insertion loss (input to output)
Wavelength flatness (input to output)
Polarization dependent loss (input to output)
PMD (input to output)
Optical return loss
PD operating bias voltage, V
R
PD responsivity
PD linearity
PD dark current
PD cut-off frequency
Input optical power
Operating temperature
Storage temperature
Tensile load
Package dimensions
Single unit
6 to 8 channels array
10 channels array
Fiber type
Pigtail color code
Specification
Maximum
Maximum
Maximum
Maximum
Minimum
Minimum
Maximum
Maximum
Maximum
1510-1580 nm
1560-1625 nm
1510-1625 nm
See table below
0.002 dB/nm
0.03 dB
0.1 ps
45 dB
-5 V (typical)
0.8 A/W (for net responsivity, see table below)
±10%
1 nA @ V
R
= -5 V and 23 °C
600 MHz @ V
R
= -5 V and R
L
= 50 W
See table below
-20 to 75 °C
-40 to 85 °C
5N
3.2 mm x 18.5 mm
32 mm x 32.5 mm x 6 mm
38.8 mm x 32.5 mm x 6 mm
SMF-28, 250 µm primary coating
Black (input port); Clear (output port)
Note: Parameters are specified for the signal wavelength range, all polarization states, and operating temperature range without connector unless otherwise stated.
Tap Ratio and Insertion Loss Table
Code
Tap Ratio
Maximum Insertion Loss
(Input to Output)
0.5 dB
0.5 dB
0.5 dB
0.5 dB
0.6 dB
0.8 dB
Minimum Net Responsivity
1
Maximum Optical Power
2
1
2
3
4
5
T
1%
2%
3%
4%
5%
10%
0.008 A/W
0.016 A/W
0.024 A/W
0.032 A/W
0.040 A/W
0.080 A/W
500 mW
250 mW
150 mW
125 mW
100 mW
50 mW
1. The net responsivity is defined as the ratio of the PD current output and optical power measured at output fiber.
2. The maximum optical power is the maximum value of the power at input port within the PD linearity range specified.
MINIATURE INTEGRATED POWER MONITOR
Ordering Information
For more information on this or other products and their availability, please contact your local JDSU account manager or
JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at
customer.service@jdsu.com.
Sample: IPM-C82310010
IPM-
Code
C
L
1
Wavelength
C-band
L-band
C + L bands
Code
1
2
3
4
5
T
Tap Ratio
1%
2%
3%
4%
5%
10%
Code
2
3
4
Package Size
Single
unit
6-8
channel
array
10-channel array
001
Code
0
1
2
3
4
5
8
9
A
B
C
Connector Type
No
connector
FC/PC
FC/SPC
FC/APC
SC/SPC
SC/APC
ST
FC/UPC
SC/UPC
LC/SPC
LC/UPC
Code
1
6
7
8
T
Channels
Single
device
6-channel array
7-channel array
8-channel array
10-channel array
Code
1
2
4
5
Fiber Length
1m
2m
0.5 m
1.5 m
SMF-28 is a registered trademark of Corning Incorporated.
ST is a registered trademark of Lucent Technologies.
All statements, technical information and recommendations related to the products herein are based upon information believed to be
reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any
inaccuracies. The user assumes all risks and liability whatsoever in connection with the use of a product or its application. JDSU reserves
the right to change at any time without notice the design, specifications, function, fit or form of its products described herein, includ-
ing withdrawal at any time of a product offered for sale herein. JDSU makes no representations that the products
herein are free from any intellectual property claims of others. Please contact JDSU for more information. JDSU and the JDSU logo are
I got the board a few days ago. The original board already has an Arduino interface. Today I used a sensor expansion board to develop the DHT11 single-bus temperature and humidity sensor.The blue part...
I was cleaning up at home yesterday and found the TXS0104 chip I had applied for before, so I DIYed an I2C level conversion board.TXS0104 is a bidirectional level conversion chip with a rate of up to ...
Click to get"PCB Design Cheats"When it comes to PCB printed circuit boards, people both "love" and "hate" it. What people love is its ability to simplify circuit design, improve work efficiency, and r...
[i=s] This post was last edited by emmnn on 2022-7-11 16:36 [/i] **Table of Contents** [TOCM] # Preface After introducing the RTOS porting, today I will introduce the development and function demonstr...
The reference chip currently used on the circuit board is ADI's ADR3433. The price on Jialichuang has increased from more than 6 yuan to 18 yuan per piece. The increase is too sharp. I would like to a...
Regarding the reset function of the capacitor in the microcontroller, since the RST reset terminal capacitor can be reset by pulling it low at the moment of power-on, then after the microcontroller's ...
The reference standard for PHS testing is ARIB RCR STD-28 "Personal Handyphone System".
Some of the main RF indicators of PHS, the main transmitter test items include frequency, modulatio...[Details]
Introduction The switching power supply is a new type of regulated power supply that uses modern power electronics technology to control the turn-on and turn-off time ratio of the power switch tub...[Details]
Apple's Worldwide Developers Conference (WWDC 2020) will be held online on June 20th, US time. According to previous years' tradition, a new version of the iOS system will be launched at the c...[Details]
On May 12, the Kuaizhou-1A carrier rocket sent the two satellites "Xingyun-2" 01/02 into the predetermined orbit, which means that the "Xingyun-2", the first satellite of the China Aerospace Science ...[Details]
It is normal to expect performance to match the datasheet signal-to-noise ratio (SNR) values when using a high-speed analog-to-digital converter (ADC). When testing the SNR of an ADC, you might c...[Details]
Relying on "customer pain points" to leverage the company's R&D direction and technology development. This is InPlay’s market survival rule and also its original intention of starting a business. Whe...[Details]
Main technical parameters of flow meter (1) Flow range The flow range refers to the range of the maximum and minimum flow rates that the flow meter can measure. (2) Range and range ratio The diffe...[Details]
Honor X10 Max will be released on July 2. At present, the phone has been successfully connected to the network. Let's take a look at its details: The Honor X10 Max model is KKG-AN00. It uses a 7.09...[Details]
Introduction Hello, dear readers. The monthly global patent monitoring report in the field of fuel cells is here again. This monitoring report mainly includes three parts: An overall introduction...[Details]
//********************************************************************************
// Function: C8051F330 serial port UART0 sample program
//********************************************************...[Details]
Xinbang Technology issued an announcement stating that due to the company's current development needs and in order to better focus on the company's business management, implement the company's develo...[Details]
Trump has made the extremely professional term "chip" widely known to the public, but EDA, a term closely related to chips, is still little known. However, this technology contains huge energy. New t...[Details]
Notes on entering HALT Set the unused IO ports to output low; Turn off all used peripheral clocks (such as ADC, USART, etc.); Peripherals used for disability; The measured standby current in HALT m...[Details]
With the explosion of emerging application markets such as 5G and AI, different applications require more and more functions, and the integrated devices are becoming more complex. Faced with this hig...[Details]
The last line after startup prompts can't access tty, job control turned off, which means that the console cannot be entered. The reason is that there is a problem in the /etc/inittab file
Sol...[Details]
GD32 MCU
京公网安备 11010802033920号
EEWORLD
