FMPEG SERIES
PAGE ONE OF THREE
(0,68335(66,1*+($'(5
FEATURES
Dual insulator design adds mechanical stability
Suppression plates help reduce EMI/RFI interference
Insulator standoffs reduce rework due to flux residue
Coined tails improve solder action
Mates with Crane’s ATP, ATL, MATP, ATS and BBP Sockets
DOUBLE ROW (2 to 80 Positions)
STANDARD PART DIMENSIONS
MATING
P
I
L
POST LENGTH
INSULATOR
SPACING
PIN LENGTH
Please refer to the chart on the next
page for a wide selection of common
board spacing options. Call us if the
size you need is not listed.
Dual Row
INSULATOR BODY
W
H
S
WIDTH
HEIGHT
STANDOFF
Dual Row
0.198" / 5,03mm
0.098" / 2,49mm
0.015" / 0,38mm
MATERIALS
INSULATOR BODY
POST
SUPPRESSION
MATERIAL
Glass Filled Polyester (UL94V-O)
Phosphor Bronze
High Volume Resistivity ferrite material
with maximum operating
temperature of 150
C
OPTIONAL HOLD-DOWN PEGS
Crane’s hold-down pegs
(top and bottom entry
available) secure part...
SMT or THRU-HOLE
... to the PC board
preventing misalignment
during handling and
soldering.
DESIGN NOTE
Noise or electromechanical interference (EMI) can play
havoc with electronic products today. With the continual
growth of high speed systems and equipment, the need for
EMI solutions has risen.
Crane connectors – sockets and headers with FERRITE
slabs captured between insulators – provide a space saving
inductive device that will suppress (minimize or eliminate) the
effects of EMI.
Crane header with Top Entry Peg
See SPECIFICATIONS and PERFORMANCE DATA for more detail
SAMPLE HOTLINE: 1-800-676-7644
CRANE CONNECTORS
• 4700 Smith Road • Cincinnati, Ohio 45212 USA • E-mail Address: info@craneconnectors.com
Phone: (513) 631-4700 • Fax (513) 631-5700 • Toll Free US (800) 676-7644 • Canada (800) 420-731
FMPEG SERIES
0.100" (2,54mm) Centers
0.025" (0,64mm) Square
Mating Posts
PAGE TWO OF THREE
HOW TO ORDER CRANE’S FMPEG SERIES
STANDARD PART NUMBER
--
--
PRODUCT SERIES
FMPE
G
TOTAL NUMBER OF POSITIONS
DUAL
02-80
NUMBER OF ROWS
DUAL
D
TYPE OF HEADER
STRAIGHT
S
PLATING (See Below For Specifications)
CHOOSE G, T or M, H, L, F
Due to the wide number of options, not all platings are stocked for all pin lengths. Contact factory for
availability.
TAIL OPTIONS
COINED
KINKED
FINE LINE*
SQUARE
0.028" / 0,71mm DIAGONAL
0.028" / 0,71mm DIAGONAL
0.018" / 0,46mm DIAGONAL
0.025" / 0,64mm DIAGONAL
R
K
F
Q
*The FINE LINE option is not available in all pin lengths.
SELECTED OPTIONS
POST
LENGTH
“P”
0.100" = D
0.200" = Q
0.150" = K
0.230" = B
0.190" = O
0.230" = B
0.125" = H
INSULATOR
SPACING
“I”
0.250" = D
0.325" = U
0.375" = F
0.375" = F
0.450" = W
0.500" = I
0.700" = N
PIN
LENGTH
“L”
0.455" = G
0.640" = N
0.640" = N
0.745" = R
0.745" = R
0.840" = V
0.935" = X
D
Q
K
B
O
B
H
D
U
F
F
W
I
N
G
N
N
R
R
V
X
FREQUENCY RANGE
NORMAL
HIGH
60 to 300 MHz
100 to 500 MHz
N
H
The height of the ferrite material will vary based on the insulator spacing. Contact the factory for information on standard parts.
JUST A SAMPLING! Contact Crane for MORE options.
Crane’s dual insulator headers with EMI Suppression Plates are available in a variety of sizes and thicknesses in both DUAL ROW and SINGLE
ROW options. Due to the number of combinations, it is impossible for us to list anything more than a sampling of what’s available. For more
information – samples, quotes, prints – contact the factory with your exact requirements. Better still, just fax us your design and we’ll do the rest.
SAMPLE HOTLINE: 1-800-676-7644
CRANE CONNECTORS
• 4700 Smith Road • Cincinnati, Ohio 45212 USA • E-mail Address: info@craneconnectors.com
Phone: (513) 631-4700 • Fax (513) 631-5700 • Toll Free US (800) 676-7644 • Canada (800) 420-7310
CRANE CONNECTORS - PLATING SPECIFICATIONS
PLATING OPTIONS
CONTACT AREA
Inches (Millimeters)
15
” (0,,00038) gold
100
” (0,00254) Tin / Lead
50
” (0,00127) Gold
30
” (0,00076) Gold
10
” (0,00025) Gold
3
” (0,00008) Gold
PC TAIL
Inches (Millimeters)
100
” (0,00254) Tin/Lead - Min
100
” (0,00254) Tin/Lead - Min
100
” (0,00254) Tin/Lead - Min
100
” (0,00254) Tin/Lead - Min
100
” (0,00254) Tin/Lead - Min
100
” (0,00254) Tin/Lead - Min
UNDERPLATE
Inches (Millimeters)
50
” (0,00127) Nickel - Min.
50
” (0,00127) Nickel - Min.
50
” (0,00127) Nickel - Min.
50
” (0,00127) Nickel - Min.
50
” (0,00127) Nickel - Min.
50
” (0,00127) Nickel - Min.
G
T
M
H
L
F
Selective
Tin / Lead
Selective
Selective
Selective
Selective
STANDARD TAIL OPTIONS ON 0.100" (2,54mm) PIN STRIP HEADERS
STANDARDS
ISO9001
“R”
COINED
The standard “R”
oprtion provided a
coined tail improving
solder action while
m a k i n g i n s e r ti o n
easier.
“K”
KINKED
The “K” option
provides a kinked tail,
reducing unwanted
movement on the PC
board.
“F”
FINE
The “F” option
combines an 0.018"
rounded tail with an
0.025" square post.
This fine line feature
allows more traces
between holes.
“Q”
SQUARE
The “Q” option
provides an 0.025"
square tail for use in
w i r e
w r a p
applications.
UL File No. E120111 (N)
Crane Connectors
File No. A-3620
Recognized to U.S. and
Canadian requirements
under the Component
Recognition Program of
Underwriters Laboratories
Inc.
Registered by UL to ISO9001
under UL’s accreditation by
Raad voor de Certificatie
(RvC), the Dutch Council for
Certification.
ENGINEERING NOTE: The information presented in this catalog page is accurate to the best of our knowledge. Due to ongoing efforts to advance
design and material performance, the information is subject to change without notice.
SAMPLE HOTLINE: 1-800-676-7644
CRANE CONNECTORS
• 4700 Smith Road • Cincinnati, Ohio 45212 USA • E-mail Address: info@craneconnectors.com
Phone: (513) 631-4700 • Fax (513) 631-5700 • Toll Free US (800) 676-7644 • Canada (800) 420-7310
京公网安备 11010802033920号
EEWORLD
