SSCSMNT600MD5A5 datasheet, PDF

Datasheet> All Categories > The sensor> SSCSMNT600MD5A5

SSCSMNT600MD5A5: DescriptionPeizoresistive Sensor, Differential, -8.702Psi Min, 8.702Psi Max, 0.25%, 0.20-0.80V, Round, Through Hole Mount, ROHS COMPLIANT, CERAMIC, SIP-4; CategoryThe sensor; File Size1MB，12 Pages; ManufacturerHoneywell; Websitehttp://www.ssec.honeywell.com/; Environmental Compliance

Download Datasheet Parametric View All

SSCSMNT600MD5A5 Overview

Peizoresistive Sensor, Differential, -8.702Psi Min, 8.702Psi Max, 0.25%, 0.20-0.80V, Round, Through Hole Mount, ROHS COMPLIANT, CERAMIC, SIP-4

SSCSMNT600MD5A5 Parametric

Parameter Name	Attribute value
Is it Rohs certified?	conform to
Maker	Honeywell
Reach Compliance Code	unknow
Maximum accuracy(%)	0.25%
body height	15.24 mm
Body length or diameter	15.24 mm
shell	CERAMIC
Installation features	THROUGH HOLE MOUNT
Number of digits	12
Maximum working current	3 mA
Maximum operating temperature	85 °C
Minimum operating temperature	-40 °C
Output interface type	I2C INTERFACE
Output range	0.20-0.80V
Output type	DIGITAL VOLTAGE
Package Shape/Form	ROUND
port type	HOLE
Maximum pressure range	8.702 Psi
Minimum pressure range	-8.702 Psi
Pressure sensing mode	DIFFERENTIAL
Response time	460 µs
Sensor/temperature sensor type	PRESSURE SENSOR,PIEZORESISTIVE
Maximum supply voltage	5.25 V
Minimum supply voltage	4.75 V
surface mount	NO
Termination type	SOLDER

Preview

Download Datasheet

View All

DESCRIPTION

The TruStability Standard Accuracy Silicon Ceramic (SSC)

Series is a piezoresistive silicon pressure sensor offering a

digital output for reading pressure over the specified full scale

pressure span and temperature range.

The SSC Series is fully calibrated and temperature

compensated for sensor offset, sensitivity, temperature effects,

and non-linearity using an on-board Application Specific

Integrated Circuit (ASIC). Calibrated output values for pressure

are updated at approximately 2 kHz.

The SSC Series is calibrated over the temperature range of

-20 C to 85 C [-4 F to 185 F]. The sensor is characterized

for operation from a single power supply of either 3.3 Vdc or

5.0 Vdc.

FEATURES

Industry-leading long-term stability

Extremely tight accuracy of 0.25% FSS BFSL (Full Scale

Span Best Fit Straight Line)

Total error band of 2% full scale span maximum

Modular and flexible design offers customers a variety of

package styles and options, all with the same industry-

leading performance specifications

Miniature 10 mm x 10 mm [0.39 in x 0.39 in] package

Low operating voltage

Extremely low power consumption

I C- or SPI- compatible 14-bit digital output (min. 12-bit

sensor resolution)

These sensors measure absolute, differential, and gage

pressures. The absolute versions have an internal vacuum

reference and an output value proportional to absolute

pressure. Differential versions allow application of pressure to

either side of the sensing diaphragm. Gage versions are

referenced to atmospheric pressure and provide an output

proportional to pressure variations from atmosphere.

The TruStability pressure sensors are intended for use with

non-corrosive, non-ionic gases, such as air and other dry

gases. An available option extends the performance of these

sensors to non-corrosive, non-ionic liquids.

All products are designed and manufactured according to ISO

9001 standards.

Precision ASIC conditioning and temperature compensated

over -20 C to 85 C [-4 F to 185 F] temperature range

RoHS compliant

Virtually insensitive to mounting orientation

Internal diagnostic functions increase system reliability

Also available with analog output

Absolute, differential, and gage types

Pressure ranges from 1 psi to 150 psi (60 mbar to 10 bar)

Custom calibration available

Various pressure port options

Liquid media option

Table 3. Environmental Specifications

Parameter

Humidity:

Dry gases only (See “Options N and D” in Figure 1.)

Liquid media (See “Options T and V” in Figure 1.)

Vibration

Shock

Life

Solder reflow

Table 4. Wetted Materials

Parameter

Covers

Substrate

Adhesives

Electronic components

Characteristic

0% to 95% RH, non-condensing

100% condensing or direct liquid media on Port 1

MIL-STD-202F, Curve AK (20.7 g random)

MIL-STD-202F, Method 213B, Condition F

1 million cycles minimum

J-STD-020-C

Port 1 (Pressure Port)

high temperature polyamide

alumina ceramic

epoxy, silicone

ceramic, glass, solder, silicon

Port 2 (Reference Port)

high temperature polyamide

alumina ceramic

epoxy, silicone

silicon, glass, gold, solder

Notes:

1. Absolute maximum ratings are the extreme limits the device will withstand without damage.

2. Ratiometricity of the sensor (the ability of the digital device to maintain performance parameters independent of supply voltage) is achieved

within the specified operating voltage for each option.

3. The sensor is not reverse polarity protected. Incorrect application of supply voltage or ground to the wrong pin may cause electrical failure.

4. The compensated temperature range is the temperature range over which the sensor will produce an output proportional to pressure within

the specified performance limits.

5. The operating temperature range is the temperature range over which the sensor will produce an output proportional to pressure but may not

remain within the specified performance limits.

6. Accuracy: The maximum deviation in output from a Best Fit Straight Line (BFSL) fitted to the output measured over the pressure range at

25 °C [77 °F]. Includes all errors due to pressure non-linearity, pressure hysteresis, and non-repeatability.

7. Total Error Band: The maximum deviation from the ideal transfer function over the entire compensated temperature and pressure range.

Includes all errors due to offset, full scale span, pressure non-linearity, pressure hysteresis, repeatability, thermal effect on offset, thermal

effect on span, and thermal hysteresis.

8. Full Scale Span (FSS) is the algebraic difference between the output signal measured at the maximum (Pmax.) and minimum (Pmin.) limits of

the pressure range. (See Figure 1 for ranges.)

9. Life may vary depending on specific application in which sensor is utilized.

10. Contact Honeywell Customer Service for detailed material information.

CAUTION

PRODUCT DAMAGE

Ensure liquid media is applied to Port 1 only; Port 2 is not compatible with liquids.

Ensure liquid media contains no particulates. All TruStability sensors are dead-ended devices. Particulates can accumulate

inside the sensor, causing damage or affecting sensor output.

Recommend that the sensor be positioned with Port 1 facing downwards; any particulates in the system are less likely to

enter and settle within the pressure sensor if it is in this position.

Ensure liquid media does not create a residue when dried; build-up inside the sensor may affect sensor output. Rinsing of a

dead-ended sensor is difficult and has limited effectiveness for removing residue.

Ensure liquid media are compatible with wetted materials. Non-compatible liquid media will degrade sensor performance and

may lead to sensor failure.

Failure to comply with these instructions may result in product damage.

Honeywell Sensing and Control

Recommended Resources

Electric contact pressure gauge liquid level automatic control circuit 4

Hisense tg-1b movement switching power supply (str-z4302a) circuit diagram

Incandescent lamp life extension switch circuit

Dimming and temperature regulating socket circuit

Opto-isolator input protection circuit

Spike detection circuit

【EVK-NINA-B400 Evaluation Kit】Hardware: I have been busy with product development recently, and have not been able to update the subsequent posts after the last unboxing post. I am really sorry to EE and Ublox . I would like to say sorry he...; ly87802541 RF/Wirelessly

Oh, mobile: China Mobile's service hotline 1860/1861, which has been used for 9 years, has been upgraded to 10086 in 31 provinces (autonomous regions and municipalities) across the country. The upgraded 10086 pro...; gaoyanmei RF/Wirelessly

MicroPython 7th Anniversary Celebration: From: https://blog.adafruit.com/2020/04/28/micropython-turns-seven-years-old-micropython-python-micropython/April 29th is MicroPython's birthday, and today is MicroPython's seventh anniversary! To cel...; dcexpert MicroPython Open Source section

[Gizwits Gokit3 Review] Unboxing and Getting Started: I am very grateful to the forum moderator for giving me the opportunity to use Gizwits' intelligent hardware development platform to match my own smart home IoT. Since the courier did not call and did...; annysky2012 Domestic Chip Exchange

This week's evaluation information is presented to you~: The latest weekly evaluation information, evaluation activities are launched online one after another, and the evaluation reports are also very exciting~Evaluation activities during the application pe...; okhxyyo Special Edition for Assessment Centres

[Evaluation of EC-01F-Kit, the NB-IoT development board of Essence] - Unboxing and power-on test: Unboxing The long-awaited NB-IoT development board from Essence has arrived, very fast. It comes with a standard three-piece set: development board, mobile data card, and antenna. The data card should...; 秦天qintian0303 RF/Wirelessly

Shortcut: A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 AA AB AC AD AE AF AG AH AI AJ AK AL AM AN AO AP AQ AR AS AT AU AV AW AX AY AZ B0 B1 B2 B3 B4 B5 B6 B7 B8 B9 BA BB BC BD BE BF BG BH BI BJ BK BL BM BN BO BP BQ BR BS BT BU BV BW BX BY BZ C0 C1 C2 C3 C4 C5 C6 C7 C8 C9 CA CB CC CD CE CF CG CH CI CJ CK CL CM CN CO CP CQ CR CS CT CU CV CW CX CY CZ D0 D1 D2 D3 D4 D5 D6 D7 D8 D9 DA DB DC DD DE DF DG DH DI DJ DK DL DM DN DO DP DQ DR DS DT DU DV DW DX DZ

Popular Components