CCC
Vishay Electro-Films
Thin Film, 1010 Center-Tapped Resistors on Alumina
CHIP
RESISTORS
FEATURES
•
Wire bondable
Product may not
be to scale
•
Larger single size for extended value range
•
Resistance range total: 100
Ω
to 1 MΩ
Custom values:
R
A
or
R
B
- 50
Ω
to 500 kΩ
•
Power: 400 mW
•
Alumina substrate
•
Low stray capacitance: < 0.2 pF
•
Resistor material: Nichrome
The CCC series resistor chips offer good 400 mW power, low
shunt capacitance and a center tap feature.
The CCCs nichrome resistor material offers excellent stability.
The CCCs are manufactured using Vishay Electro-Films
(EFI) sophisticated thin film equipment and manufacturing
technology.
The CCCs are 100 % electrically tested and visually
inspected to MIL-STD-883.
APPLICATIONS
Vishay EFI CCC chip resistors provide excellent high-frequency response and are ideally suited for prototyping.
Typical application areas are:
•
Amplifiers
•
Couplers
•
Oscillators
•
Filters
•
Attenuators
Recommended for hermetic environment where die is not exposed to moisture.
TEMPERATURE COEFFICIENT OF RESISTANCE, VALUES AND TOLERANCES
Tightest Standard Tolerance Available
0.1 %
± 10 ppm/°C
± 25 ppm/°C
± 50 ppm/°C
± 100 ppm/°C
PROCESS CODE
CLASS H*
203
200
201
202
*MIL-PRF-38534 inspection criteria
CLASS K*
207
204
205
206
100
Ω
200
Ω
500 kΩ
1 MΩ
STANDARD ELECTRICAL SPECIFICATIONS
PARAMETER
Noise, MIL-STD-202, Method 308
Center Tap Ratio,
R
A
/R
B
: Tolerance
Stability, 1000 h, + 125 °C, 400 mW
Operating Temperature Range
Thermal Shock, MIL-STD-202, Method 107, Test Condition F
High Temperature Exposure, + 150 °C, 100 h
Dielectric Voltage Breakdown
Insulation Resistance
Operating Voltage
DC Power Rating at + 125 °C
5 x Rated Power Short-Time Overload, + 25 °C, 5 s
- 20 dB typ.
1±1%
± 0.1 % max.
ΔR/R
- 55 °C to + 125 °C
± 0.25 % max.
ΔR/R
± 0.25 % max.
ΔR/R
400 V
10
12
min.
200 V max.
400 mW max.
± 0.25 % max.
ΔR/R
www.vishay.com
70
For technical questions, contact: efi@vishay.com
Document Number: 61010
Revision: 11-Mar-08
CCC
Thin Film, 1010 Center-Tapped Resistors on
Vishay Electro-Films
Alumina
DIMENSIONS
in inches
0.100
0.010
CHIP
RESISTORS
0.010
0.010
0.082
0.100
0.005
SCHEMATIC
R
T
=
R
A
+
R
B
R
A
R
B
MECHANICAL SPECIFICATIONS
in inches
PARAMETER
Chip Size
Chip Thickness
Chip Substrate Material
Resistor Material
Bonding Pad Size
Number of Pads
Pad Material
Backing
Options:
Gold back for solder die attach
Contact Applications Engineer
0.100 x 0.100 ± 0.003 (2.5 x 2.5 ± 0.08 mm)
0.010 ± 0.002 (0.25 ± 0.03 mm)
99.6 % alumina, 2 - 4 microinch finish
Nichrome
0.005 x 0.010 (0.12 x 0.24 mm) minimum
6
25 kÅ minimum gold standard
None
ORDERING INFORMATION
Example: 100 % visual,
R
T
= 500
Ω,
50
Ω,
± 10 %, ± 50 ppm/°C TCR,
R
A
=
R
B
=
R
T
/2, gold pads, class H visual inspection
For tighter ratio tolerance,
R
A
,
R
B
or user trim consult factory for P/N.
W
INSPECTION/
PACKAGING
W = 100 % visually inspected
parts
X = Sample, visually inspected
loaded in matrix trays (4 % AQL)
CCC
PRODUCT
FAMILY
201
PROCESS
CODE
See Process Code
table
5000
RESISTANCE
VALUE
Use first 4
significant digits of
resistance
(R
T
)
A
MULTIPLIER
CODE
B
= 0.01
A
= 0.1
0
=1
1
= 10
K
TOLERANCE
CODE
B
= 0.1 %
C
= 0.25 %
D
= 0.5 %
F
= 1.0 %
G
= 2.0 %
H
= 2.5 %
J
= 5.0 %
K
= 10 %
*Coating standard
Document Number: 61010
Revision: 11-Mar-08
For technical questions, contact: efi@vishay.com
www.vishay.com
71
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
MEMS sensors
京公网安备 11010802033920号
EEWORLD
