24AA00/24LC00/24C00
24AA014/24LC014
24AA02/24LC02B
24AA024/24LC024
24AA04/24LC04B
24AA16/24LC16B
24AA64/24LC64/24FC64
24AA256/24LC256/24FC256
24AA01/24LC01B
24C01C/24C02C
24AA025/24LC025
24AA08/24LC08B
24AA32A/24LC32A
24AA128/24LC128/24FC128
24AA512/24LC512/24FC512
24AA1025/24LC1025/24FC1025
I
2
C
™
Serial EEPROM Family Data Sheet
Features:
• 128-bit through 1024 Kbit Devices
• Single Supply with Operation Down to 1.7V for
24AAXX Devices
• Low-Power CMOS Technology:
- 1 mA active current, typical
- 1
μA
standby current, typical (I-temp)
• 2-Wire Serial Interface Bus, I
2
C™ Compatible
• Schmitt Trigger Inputs for Noise Suppression
• Output Slope Control to Eliminate Ground Bounce
• 400 kHz (≥ 2.5V): 24LCXX and 24AAXX
• 1 MHz (≥ 2.5V) and 400 kHz (1.7V): 24FCXX
• Self-Timed Write Cycle (including Auto-Erase)
• Page Write Buffer
• Hardware Write-Protect Available on Most
Devices
• Factory Programming (QTP) Available
• ESD Protection >4,000V
• 1 Million Erase/Write Cycles
• Data Retention >200 years
• 8-lead PDIP, SOIC, TSSOP and MSOP Packages
• 5-lead SOT-23 Package (Most 1-16 Kbit Devices)
• 8-lead 2x3mm and 5x6mm DFN Packages
Available
• Pb-Free and RoHS Compliant
• Available for Extended Temperature Ranges:
- Industrial (I): -40°C to +85°C
- Automotive (E): -40°C to +125°C
Description:
The Microchip Technology Inc. 24CXX, 24LCXX,
24AAXX and 24FCXX (24XX*) devices are a family of
128-bit through 1024 Kbit Electrically Erased PROMs.
The devices are organized in blocks of x8-bit memory
with 2-wire serial interfaces. Low-voltage design
permits operation down to 1.7V (for 24AAXX devices),
with standby and active currents of only 1
μA
and 1
mA, respectively. Devices 1 Kbit and larger have page
write capability. Parts having functional address lines
allow connection of up to 8 devices on the same bus.
The 24XX family is available in the standard 8-pin
PDIP, surface mount SOIC, TSSOP and MSOP pack-
ages. Most 128-bit through 16 Kbit devices are also
available in the 5-lead SOT-23 package. DFN
packages (2x3mm or 5x6mm) are also available. All
packages are Pb-free (Matte Tin) finish.
Note:
This document is an overview. For
detailed specifications, please consult the
individual product data sheet, available at
www.microchip.com.
*24XX is used in this document as a generic part
number for 24 series devices in this data sheet.
24XX64, for example, represents all voltages of the 64
Kbit device.
Package Types
(1)
PDIP/SOIC
A0
A1
A2
V
SS
1
2
3
4
8
7
6
5
V
CC
WP
(3)
TSSOP/MSOP
(2)
A0
A1
A2
V
SS
1
2
3
4
8
7
6
5
V
CC
WP
(3)
SCL
SDA
Note 1:
SCL
V
SS
SDA
SOT-23-5
(24XX00)
1
2
3
4
NC
5
V
CC
SCL
SDA
SOT-23-5
(all except 24XX00)
SCL
V
SS
SDA
1
2
3
4
V
CC
5
WP
A0 1
A1 2
A2 3
V
SS
4
DFN
8 V
CC
7 WP
(3)
6 SCL
5 SDA
2:
3:
Pins A0, A1, A2 and WP are not used by some
devices (no internal connections). See Table 1-1,
Device Selection Table, for details.
Pins A0 and A1 are no-connects for the 24XX128
and 24XX256 MSOP devices.
Pin 7 is “not used” for 24XX00, 24XX025 and
24C01C.
©
2007 Microchip Technology Inc.
DS21930C-page 1
24AAXX/24LCXX/24FCXX
2.0
ELECTRICAL CHARACTERISTICS
Absolute Maximum Ratings
(†)
V
CC
.............................................................................................................................................................................6.5V
All inputs and outputs w.r.t. V
SS
......................................................................................................... -0.6V to V
CC
+1.0V
Storage temperature ...............................................................................................................................-65°C to +150°C
Ambient temperature with power applied ................................................................................................-40°C to +125°C
ESD protection on all pins
......................................................................................................................................................≥
4 kV
† NOTICE: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to
the device. This is a stress rating only and functional operation of the device at those or any other conditions
above those indicated in the operational listings of this specification is not implied. Exposure to maximum rating
conditions for extended periods may affect device reliability.
TABLE 2-1:
DC CHARACTERISTICS
Electrical Characteristics:
Industrial (I):
V
CC
= +1.7V to 5.5V T
A
= -40°C to +85°C
Automotive (E): V
CC
= +2.5V to 5.5V T
A
= -40°C to 125°C
Characteristic
A0, A1, A2, SCL, SDA and
WP pins:
High-level input voltage
Low-level input voltage
Hysteresis of Schmitt Trigger
inputs (SDA, SCL pins)
Low-level output voltage
Input leakage current
Output leakage current
Pin capacitance
(all inputs/outputs)
Min.
—
0.7 V
CC
—
0.05 V
CC
—
—
—
—
—
Max.
—
—
0.3 V
CC
0.2 V
CC
—
0.40
±1
±1
10
500
400
1
Units
—
V
V
V
V
V
μA
μA
pF
μA
μA
mA
—
—
V
CC
≥
2.5V
V
CC
< 2.5V
(Note 1)
I
OL
= 3.0 mA @ V
CC
= 2.5V
V
IN
= V
SS
or V
CC
V
OUT
= V
SS
or V
CC
V
CC
= 5.0V
(Note 1)
T
A
= 25°C, F
CLK
= 1 MHz
24XX1025
24XX128, 256, 512:
All except 24XX128, 256, 512,
1025:
(V
CC
= 5.5V, SCL = 400 kHz)
All except 24XX512 and
24XX1025
24XX512 and 24XX1025
(V
CC
= 5.5V)
All except 24XX1025
24XX1025
24C01C and 24C02C only
(TA = -40°C to +85°C)
All except 24XX1025
(TA = -40°C to +125°C)
SCL = SDA = V
CC
= 5.5V
A0, A1, A2, WP = V
SS
or V
CC
Conditions
DC CHARACTERISTICS
Param.
No.
D1
D2
D3
D4
D5
D6
D7
D8
D9
Sym.
—
V
IH
V
IL
V
HYS
V
OL
I
LI
I
LO
C
IN
,
C
OUT
I
CC
Read Operating current
I
CC
Write
—
3
5
mA
mA
μA
μA
μA
μA
D10
I
CCS
Standby current
—
—
—
—
1
5
50
5
Note 1:
This parameter is periodically sampled and not 100% tested.
DS21930C-page 4
©
2007 Microchip Technology Inc.
24AAXX/24LCXX/24FCXX
TABLE 2-2:
AC CHARACTERISTICS – ALL EXCEPT 24XX00, 24C01C
AND 24C02C
Electrical Characteristics:
Industrial (I):
V
CC
= +1.7V to 5.5V T
A
= -40°C to +85°C
Automotive (E): V
CC
= +2.5V to 5.5V T
A
= -40°C to 125°C
Characteristic
Clock frequency
Min.
—
—
—
—
4000
600
600
500
4700
1300
1300
500
—
—
—
—
—
4000
600
600
250
4700
600
600
250
0
250
100
100
4000
600
600
250
4000
600
600
4700
1300
1300
Max.
100
400
400
1000
—
—
—
—
—
—
—
—
1000
300
300
300
100
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Units
kHz
Conditions
1.7V
≤
V
CC
<
2.5V
2.5V
≤
V
CC
≤
5.5V
1.7V
≤
V
CC
<
2.5V 24FCXXX
2.5V
≤
V
CC
≤
5.5V 24FCXXX
1.7V
≤
V
CC
<
2.5V
2.5V
≤
V
CC
≤
5.5V
1.7V
≤
V
CC
<
2.5V 24FCXXX
2.5V
≤
V
CC
≤
5.5V 24FCXXX
1.7V
≤
V
CC
<
2.5V
2.5V
≤
V
CC
≤
5.5V
1.7V
≤
V
CC
<
2.5V 24FCXXX
2.5V
≤
V
CC
≤
5.5V 24FCXXX
1.7V
≤
V
CC
<
2.5V
2.5V
≤
V
CC
≤
5.5V
1.7V
≤
V
CC
≤
5.5V 24FCXXX
All except 24FCXXX
1.7V
≤
V
CC
≤
5.5V 24FCXXX
1.7V
≤
V
CC
<
2.5V
2.5V
≤
V
CC
≤
5.5V
1.7V
≤
V
CC
<
2.5V 24FCXXX
2.5V
≤
V
CC
≤
5.5V 24FCXXX
1.7V
≤
V
CC
<
2.5V
2.5V
≤
V
CC
≤
5.5V
1.7V
≤
V
CC
<
2.5V 24FCXXX
2.5V
≤
V
CC
≤
5.5V 24FCXXX
(Note 2)
1.7V
≤
V
CC
<
2.5V
2.5V
≤
V
CC
≤
5.5V
1.7V
≤
V
CC
≤
5.5V 24FCXXX
1.7 V
≤
V
CC
<
2.5V
2.5 V
≤
V
CC
≤
5.5V
1.7V
≤
V
CC
<
2.5V 24FCXXX
2.5 V
≤
V
CC
≤
5.5V 24FCXXX
1.7V
≤
V
CC
<
2.5V
2.5V
≤
V
CC
≤
5.5V
1.7V
≤
V
CC
≤
5.5V 24FCXXX
1.7V
≤
V
CC
<
2.5V
2.5V
≤
V
CC
≤
5.5V
1.7V
≤
V
CC
≤
5.5V 24FCXXX
AC CHARACTERISTICS
Param.
No.
1
Sym.
F
CLK
2
T
HIGH
Clock high time
ns
3
T
LOW
Clock low time
ns
4
T
R
SDA and SCL rise time
(Note 1)
SDA and SCL fall time
(Note 1)
ns
5
6
T
F
ns
ns
T
HD
:
STA
Start condition hold time
7
T
SU
:
STA
Start condition setup time
ns
8
9
T
HD
:
DAT
Data input hold time
T
SU
:
DAT
Data input setup time
ns
ns
10
T
SU
:
STO
Stop condition setup time
ns
11
T
SU
:
WP
WP setup time
(32K and above only)
T
HD
:
WP
WP hold time
(32K and above only)
ns
12
ns
Note 1:
Not 100% tested. C
B
= total capacitance of one bus line in pF.
2:
As a transmitter, the device must provide an internal minimum delay time to bridge the undefined region
(minimum 300 ns) of the falling edge of SCL to avoid unintended generation of Start or Stop conditions.
3:
This parameter is not tested but ensured by characterization. For endurance estimates in a specific
application, please consult the Total Endurance™ Model, which can be obtained from Microchip’s web site:
www.microchip.com.
4:
24FCXXX denotes the 24FC64, 24FC128, 24FC256, 24FC512 and 24FC1025 devices.
©
2007 Microchip Technology Inc.
DS21930C-page 5