• Extremely low wavelength dependent loss (WDL) and PDL
• Up to 10-channel arrays
Applications
• EDFA
• Raman amplifiers
• Add/Drop monitoring
• DWDM systems
JDSU miniature integrated power monitors are designed for channel monitoring
in dense wavelength division multiplexing (DWDM) systems and Add/Drop
modules. They can also be used for signal/pump power monitoring in erbium
doped fiber amplifiers (EDFAs) and Raman amplifiers where integrated solutions
tend to replace traditional fused fiber tap + photodiodes. The miniaturized
version is a high performance active hybrid device that incorporates a micro-optic
tap coupler and high-sensitivity InGaAs photodiode in a miniature package. It
offers high reliability, compact footprint with ultra-wide bandwidth, and very low
polarization dependent loss (PDL).
NORTH AMERICA
:
800 498-JDSU (5378)
WORLDWIDE
:
+800 5378-JDSU
WEBSITE
:
www.jdsu.com
MINIATURE INTEGRATED POWER MONITOR
2
IPM Single Unit Diagram
(Specifications in mm unless otherwise noted.)
20.1 MAX
18.35
7.0 MAX
Ø 3.20
0.50 X 0.50
Ø 0.50
PITCH 2.54
IPM Array (6 to 8 channels) Diagram
(Specifications in mm unless otherwise noted.)
32.00
3.20
PITCH 2.54 X 11
=27.94
3.0
Ø 0.51
Ø 1.14
PIN 1
27.94
32.50
22.86
6.00
IPM Array Pinout
(8 channel only)
BOTTOM VIEW
Pin
1
2
3
4
5
6
7
8
9
10
11
12
Description
Anode (Common)
Cathode 1
Cathode 2
Anode (Common)
Cathode 3
Cathode 4
Cathode 5
Anode (Common)
Cathode 6
Cathode 7
Anode (Common)
Cathode 8
MINIATURE INTEGRATED POWER MONITOR
3
Specifications
Parameter
Wavelength range
C-Band
L-Band
C+L Band
Insertion loss (input to output)
Wavelength flatness (input to output)
Polarization dependent loss (input to output)
PMD (input to output)
Optical return loss
PD operating bias voltage, V
R
PD responsivity
PD linearity
PD dark current
PD cut-off frequency
Input optical power
Operating temperature
Storage temperature
Tensile load
Package dimensions
Single unit
6 to 8 channels array
10 channels array
Fiber type
Pigtail color code
Specification
Maximum
Maximum
Maximum
Maximum
Minimum
Minimum
Maximum
Maximum
Maximum
1510-1580 nm
1560-1625 nm
1510-1625 nm
See table below
0.002 dB/nm
0.03 dB
0.1 ps
45 dB
-5 V (typical)
0.8 A/W (for net responsivity, see table below)
±10%
1 nA @ V
R
= -5 V and 23 °C
600 MHz @ V
R
= -5 V and R
L
= 50 W
See table below
-20 to 75 °C
-40 to 85 °C
5N
3.2 mm x 18.5 mm
32 mm x 32.5 mm x 6 mm
38.8 mm x 32.5 mm x 6 mm
SMF-28, 250 µm primary coating
Black (input port); Clear (output port)
Note: Parameters are specified for the signal wavelength range, all polarization states, and operating temperature range without connector unless otherwise stated.
Tap Ratio and Insertion Loss Table
Code
Tap Ratio
Maximum Insertion Loss
(Input to Output)
0.5 dB
0.5 dB
0.5 dB
0.5 dB
0.6 dB
0.8 dB
Minimum Net Responsivity
1
Maximum Optical Power
2
1
2
3
4
5
T
1%
2%
3%
4%
5%
10%
0.008 A/W
0.016 A/W
0.024 A/W
0.032 A/W
0.040 A/W
0.080 A/W
500 mW
250 mW
150 mW
125 mW
100 mW
50 mW
1. The net responsivity is defined as the ratio of the PD current output and optical power measured at output fiber.
2. The maximum optical power is the maximum value of the power at input port within the PD linearity range specified.
MINIATURE INTEGRATED POWER MONITOR
Ordering Information
For more information on this or other products and their availability, please contact your local JDSU account manager or
JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at
customer.service@jdsu.com.
Sample: IPM-C82310010
IPM-
Code
C
L
1
Wavelength
C-band
L-band
C + L bands
Code
1
2
3
4
5
T
Tap Ratio
1%
2%
3%
4%
5%
10%
Code
2
3
4
Package Size
Single
unit
6-8
channel
array
10-channel array
001
Code
0
1
2
3
4
5
8
9
A
B
C
Connector Type
No
connector
FC/PC
FC/SPC
FC/APC
SC/SPC
SC/APC
ST
FC/UPC
SC/UPC
LC/SPC
LC/UPC
Code
1
6
7
8
T
Channels
Single
device
6-channel array
7-channel array
8-channel array
10-channel array
Code
1
2
4
5
Fiber Length
1m
2m
0.5 m
1.5 m
SMF-28 is a registered trademark of Corning Incorporated.
ST is a registered trademark of Lucent Technologies.
All statements, technical information and recommendations related to the products herein are based upon information believed to be
reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any
inaccuracies. The user assumes all risks and liability whatsoever in connection with the use of a product or its application. JDSU reserves
the right to change at any time without notice the design, specifications, function, fit or form of its products described herein, includ-
ing withdrawal at any time of a product offered for sale herein. JDSU makes no representations that the products
herein are free from any intellectual property claims of others. Please contact JDSU for more information. JDSU and the JDSU logo are
[i=s]This post was last edited by sonicfirr on 2022-4-19 20:21[/i]I am still getting familiar with Linux . I just realized that Linux has neither native GUI nor application layer protocol stack. So to...
[i=s]This post was last edited by James199 on 2021-10-17 18:56[/i]At present, most combinations in the industry are Amazon's FreeRTOS + ARM. This time we will use Huawei Hongmeng to replace FreeRTOS a...
Some power control circuits use NMOS to control the negative output, cutting off the negative pole of the battery and the system's GND. What are the advantages and disadvantages of this compared to po...
TWS (True Wireless Stereo) Bluetooth headsets are extremely popular audio products in recent years. With the help of Bluetooth chips, it first establishes a wireless connection between the mobile phon...
Electronic systems are increasingly using RF sources in radio frequency (RF) applications such as automotive radar, 5G cellular, and the Internet of Things. All of these RF sources require ways to mon...
The current level of automation is amazing. 5-axis and 6-axis machines have so many joints and can accurately transmit motion and instructions. All parts work closely together to complete complex t...[Details]
This solution has won mass production orders from leading domestic automakers
Shanghai, China – April 18, 2023 – BlackBerry today announced that the autonomous driving assistance sys...[Details]
1 Introduction
Medium frequency inverter power supply is a standard power supply system widely used in aircraft, ships, radars, communications, missiles, and vehicles. In order to further imp...[Details]
Input capture is used in many situations. Because it is related to time, it has obvious advantages over hardware-triggered interrupts such as keyboard interrupts. The time between the previous...[Details]
Many battery-powered handheld systems require digital signal processing functions, and power consumption must be a top priority when designing such products.
Choosing a DSP that meets both the...[Details]
We almost always need to measure some type of current. In my last article, I covered the two main reasons to measure current and a few ways to do it using lossy current sensing techniques. Thi...[Details]
The history of human development is also the history of energy development. The origin of the industrial revolution is closely related to the way energy is used. Today, the world's energy sector is...[Details]
On June 12, the Korea Times quoted an insider as saying that OpenAI CEO Sam Altman recently met with Samsung Group Chairman Lee Jae-yong, who was on a business trip to the United States. At the sam...[Details]
1 Introduction
With the continuous development of science and technology, the requirements for the detection of equipment status are getting higher and higher, which requires the test equipment to ...[Details]
According to South Korean media ETNews, Samsung SDI plans to invest about US$890 million to double the number of square battery production lines at its Hungarian factory by the end of this year and s...[Details]
When I first joined the new company and built the WINCE6.0+S3C2451 development environment, I encountered some weird problems, which delayed me for some time. I wrote them down here, hoping that ev...[Details]
The Galaxy Wearable app has been updated recently. Although it is not clearly stated in the changelog, the new version adds support for Galaxy Buds 2, Galaxy Watch 4, and Galaxy Watch 4 Classic...[Details]
As we all know, multimeter is a common basic electronic testing tool. It is no exaggeration to say that multimeter is used wherever there is electricity. In foreign countries, multimeter has b...[Details]
When using an 8051-based microcontroller, the external clock reference must be chosen carefully to ensure that the timing requirements of the controller's serial interface are met. Typically, an 8051...[Details]
Domestic Chip Exchange
京公网安备 11010802033920号
EEWORLD
