The JDSU near infrared fused coupler splits or combines light at any selected
wavelength from 700 to 1150 nm. Designed for applications in fiber laser, sensor
and avionics applications, the coupler utilizes low loss fused fiber technology. No
light leaves the fiber and therefore no alignment is required; and there are no
unwanted reflections. Furthermore the output fiber pigtails may be directly
integrated into beam delivery systems.
NORTH AMERICA
:
800 498-JDSU (5378)
WORLDWIDE
:
+800 5378-JDSU
WEBSITE
:
www.jdsu.com
FUSED COUPLER, NEAR INFRARED
2
Configuration
1x2
P1 (Red) COMMON (Input)
P2 (Blue) SIGNAL (Input)
P3 (Red) TAP (Output)
2x2
P1 (Red) COMMON (Input)
P2 (Blue) SIGNAL (Input)
P4 (Blue)
P3 (Red) TAP (Output)
Insertion Loss
Coupling Ratio
Grade
Available Housing Option
Signal Path Insertion Loss
1, 2
(Maximum)
0.9 dB
1.1 dB
1.5 dB
1.7 dB
2.2 dB
2.4 dB
3.0 dB
3.2 dB
3.8 dB
4.0 dB
Tap Path Insertion Loss
1, 2
(Maximum)
12.2 dB
12.4 dB
8.4 dB
8.6 dB
6.4 dB
6.5 dB
4.9 dB
5.1 dB
3.8 dB
4.0 dB
10%
10%
20%
20%
30%
30%
40%
40%
50%
50%
A
B
A
B
A
B
A
B
A
B
3, 4, 5, 6
3, 4, 5, 6
3, 4, 5, 6
3, 4, 5, 6
3, 4, 5, 6
3, 4, 5, 6
3, 4, 5, 6
3, 4, 5, 6
3, 4, 5, 6
3, 4, 5, 6
1. Insertion loss at operating wavelength range (not including PDL, TDL or connector losses).
2. In 2x2 couplers with a coupling ratio of 20% or lower, insertion loss is not specified for launch through second input port (P4).
FUSED COUPLER, NEAR INFRARED
3
Housing Option
Housing Code
3
4
5
6
Description
Regular
Ø 0.9 mm slim
Ø 0.9 mm semi-ruggedized
Ø 3.0 mm fully ruggedized
1x2, 2x2 Dimensions (mm)
3.0 (Ø) x 50 (L)
3.0 (Ø) x 60 (L)
5.0 (Ø) x 75 (L)
80 (L) x 10 (W) x 8 (H)
Pigtail
Primary-coated fiber
Ø 0.9 mm loose-tube
Ø 0.9 mm loose-tube
Ø 3.0 mm fan-out sleeving
Specifications
Parameter
Operating wavelength range
1
Excess loss
Return loss/Directivity
Pigtail tensile load
Optical power handling
Operating temperature range
2
Storage temperature range
Fiber type
Grade A
Grade B
Typical
Minimum
Maximum
Maximum
Any wavelength within the 700 to 1150 nm range
0.30 dB
0.50 dB
50 dB
5N
4W
-40 to 75 °C
-40 to 85 °C
Speciality fiber
1. Any specific wavelength point from within the range 633 to 850 nm may be selected. For wavelengths outside of this range, contact JDSU with specific requirements.
2. For connectorised component, operating temperature range is -5 to 75 °C.
FUSED COUPLER, NEAR INFRARED
4
Ordering Information
For more information on this or other products and their availability, please contact your local JDSU account manager or
JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at
customer.service@jdsu.com.
Sample: FFS-060K31A10 (Fused Fiber Speciality Coupler, 1060 nm, 50/50 coupling ratio, regular housing, 1x2, A grade, 1 m
pigtails, no connectors)
FFS-
Code
7
8
9
0
1
Wavelength
(First Digit)
7xx nm
8xx nm
9xx nm
10xx nm
11xx nm
Code
A
C
E
H
K
Coupling Ratio
1
10%
20%
30%
40%
50%
Code
1
2
Configuration
1x2
2x2
Code
0
1
3
5
9
A
B
Connectors
2, 4
None
FC/PC
FC/APC
SC/APC
FC/UPC
SC/UPC
LC
5
Code
A
B
Grade
Grade A
Grade B
Code
Wavelength
(Second and
Third Digit)
Examples:
33
x33 nm
32
x32 nm
57
x57 nm
Code
3
4
5
6
Housing
2
Regular
Ø 0.9 mm slim
Ø 0.9 mm
semi-ruggedised
Ø 3.0mm fully
ruggedised
Code
0
1
Pigtail Length
3
(Minimum)
0.5 meter
1 meter
1. Other coupling ratio are available. Please contact JDSU for ordering codes of coupling ratios not listed.
2. Connectors may be fitted to housing types 4, 5 and 6. For connectorisation of housing type 3, please contact JDSU sales office.
3. Minimum pigtail length. Other pigtail lengths are available on request. When the pigtail has been modified to include a
connector, pigtail length measurment includes the connector end face.
4. Excess Loss in specification table does not include connector losses.
5. LC connector is not available for housing code 6, fully ruggedised housing.
LC is a registered trademark of Lucent Technologies.
Is there such a DC circuit that can supply power by plugging in without distinguishing between positive and negative poles, that is, both positive and reverse connection can supply power normally?Or c...
One of the main differences between a traditional internal combustion engine vehicle and a hybrid electric vehicle (HEV) or electric vehicle (EV) is the presence of multiple batteries and voltage leve...
Now, when there is no product, fake products are used to make up the rhythm? Netizens need to be careful,
There are only two cases that I know of and that our forum engineers have personally experienc...
[i=s]This post was last edited by anger0925 on 2021-7-25 10:29[/i]First of all, I would like to thank EEWORLD and Silicon for giving me the opportunity to experience the EFM32PG22 development kit and ...
Convert USB power supply to positive and negative 15V power supply, which can power 3 op amps. The power consumption of op amp is about 300MW, which should be enough. Please recommend related circuits...
The whole system works as follows: the DTGS-800 module, travel switch, antenna and other auxiliary circuits are packaged into an independent unit to make a positioning terminal, which is fixed to th...[Details]
On August 8, 2016, Zhongshun New Energy signed a cooperation agreement with Zhongguancun Online to officially promote Zhongshunxin brand products on its platform.
This time, two representa...[Details]
Recently, Coolpad’s countdown poster for new products revealed a lot of information about the new products. Let’s take a look. Coolpad's new product is the Coolpad 26th Anniversary Collector's Edit...[Details]
Multimedia processors are often
the most power-hungry devices in
portable
electronic
devices. The common approach to reducing CPU power requirements is to reduce the clock frequency or o...[Details]
On October 24, the National Energy Administration released the "List of the Third Batch of the First Major Technological Equipment (Projects) in the Energy Field", among which two flow battery proj...[Details]
Do you have a DVD or TV remote control at home? Most remote controls can be used. Press any key on the remote control to display the digital tube plus 1--- 0--9 in a cycle. Add a receiving head to ...[Details]
Jiwei.com reported on October 19 that today, Xiaomi’s official Weibo account announced that Xiaomi launched the first 80W wireless charging, breaking the global record for mobile phone wireless charg...[Details]
Better system performance can be achieved by using a single high-power, isolated DC-DC module to convert the 48V voltage to an intermediate power supply, such as 12V or lower. This intermediate volta...[Details]
introduction
In recent years, some special properties of polymer dispersed liquid crystal (PDLC) have been widely used. Based on the current theoretical research results of PDLC, thi...[Details]
The most common part of a hardware designer's job is to write code to test hardware. These 10 C tips (C is still a common choice) can help designers avoid basic mistakes that lead to bugs and maint...[Details]
The 23rd China International Industry Fair with the theme of "Carbon Cycle, New Numbers, New Economy" opened at the National Exhibition and Convention Center (Shanghai) on September 19, 2023.
S...[Details]
Ⅰ. Write in front The previous article talked about TIM precise delay (blocking type) . Its main feature is precise delay. During the delay process, blocking delay cannot do anything else and can onl...[Details]
On May 16, according to official news from Toyota China, its joint Fuel Cell System R&D (Beijing) Co., Ltd. (hereinafter referred to as FCRD) and Huafeng Fuel Cell Co., Ltd. (hereinafter referred to ...[Details]
Not universal. There are three main differences: First, check whether the probe interface matches the oscilloscope; Second, check whether the probe input impedance is consistent with the oscillosco...[Details]
Power technology
京公网安备 11010802033920号
EEWORLD
