-
1. Set the range switch to the AC voltage range. All multimeters should have this function. 2. The measuring range is from 200mv to 750v. Generally, the 200v range is selected. Some clamp meters do n...[Details]
-
1 Introduction The SysTick timer is bundled in the NVIC and is used to generate the SysTick exception (exception number: 15). In the past, the operating system and all systems that used a time base...[Details]
-
Micro-electromechanical systems (MEMS) technologies are achieved by deploying mechanical devices, sensors and electronic components on a single silicon substrate using advanced micro- fabricat...[Details]
-
In-car wireless connectivity started a decade ago with simple Bluetooth and Wi-Fi capabilities and has increased dramatically over the past few years. It started with simple Bluetooth hands-free capa...[Details]
-
Anyone who has come into contact with STM32 probably has some understanding of the STM32CUBE artifact.
STM32CUBE consists of two parts. One part is the graphical configuration tool software ST...[Details]
-
1.
Introduction
...
Pipeline stray current interference usually takes good single grounding protection to obtain satisfactory results, but i...[Details]
-
International Energy Network learned that on April 24, the second phase of the 500MW project of the Shenzhen Energy Shule 2000MW photovoltaic storage integrated project string inverter procurement ...[Details]
-
Program source code #include reg51.h #include intrins.h #include math.h #define uchar unsigned char #define uint unsigned int unsigned long Result,i; sbit SDA=P1^1; //PCF8591 interface s...[Details]
-
Munich, Germany and Santa Barbara, California, April 8, 2024 –
Infineon Technologies AG and Green Hills Software LLC, a global leader in embedded security, have jointly launched an integrated m...[Details]
-
In the system of calibrating digital voltmeters, DC signal source is often used. According to the requirements, it should be a voltage stabilizing source with high output voltage stability and adjus...[Details]
-
1. Line character separator 1. As shown in the figure below, the margin of the red line is set to 80 characters by default. This is to make the code neat and beautiful. It is best to keep each line o...[Details]
-
1. Right-aligned data reading problem The conversion result can be read as: resualt=int(ADCH)*256+ADCL; When right-aligned, the result of the 10-bit ADC is represented as ADCH:ADCL, ADCH is the hi...[Details]
-
When designing battery-powered products, one obviously wants to maximize battery life. Energy-sensitive product applications are broadly classified into energy metering systems, home and building au...[Details]
-
In the computer industry, lithium-ion
batteries
are both loved and feared. The accidents that occurred in the early days of lithium-ion
battery
applications are still fresh in the m...[Details]
-
Silicon Labs and many IoT ecosystem and platform partners successfully held the 2024 Shanghai Works With Developer Conference
Keynote speeches, guest speeches, roundtable forum...[Details]