Fiber-Optic Accessories
Various Accessories Expand the
Usefulness of the Fiber-Optic Cables
Lenses extend sensing distances
Side-view attachments provide space
savings
Flexible stainless steel tubes protect
plastic fibers from mechanical damage
Thin fiber adapters as replacement
Splices for 2.2 mm fiber can be used to
repair cut fiber
E39
Ordering Information
ATTACHMENTS
Description
Focusing lens pair (use with E32-TC50/200/500/1000, E32-T11(L), E32-TC200C, E32-T61)
Side-view reflector pair
Convergent beam conversion kit (to fit fibers that accept E39-F1 lenses)
Pinpoint focusing lens (for E32-D32)
Side-view diffuse reflective conversion kit (for through-beam fibers)
Part number
E39-F1
E39-F2
E39-F3
E39-F3A
E39-F5
PROTECTIVE STAINLESS STEEL FLEXIBLE TUBES FOR PLASTIC FIBERS
Description
E32-DC200E, E32-DC200F(4), E32-D21, E32-D21L
Single tubes
Appearance
Length (L)
0.5 m
1m
0.5 m
1m
0.5 m
Pairs
Part number
E39-F32A5
E39-F32A
E39-F32D5
E39-F32D
E39-F32B5
E39-F32B
E39-F32C5
E39-F32C
E32-DC200, E32-DC200B(4), E32-CC200, E32-D11
E32-D11L, E32-D51
E32-TC200E, E32-TC200F(4), E32-T21, E32-T12L
E32-TC200, E32-TC200B(4), E32-T11, E32-T11L,
E32-T51L
1m
0.5 m
1m
ADAPTERS/REPAIR PARTS
Description
Thin fiber adapter (1.0 mm to 2.2 mm dia.)
Splice for 2.2 mm dia. fiber (except E32-T51/E32-D51)
Fiber cutting tool (supplied with each trimmable plastic fiber optic cable)
Fiber probe bending tool
Mounting bracket replacement for E32-T16 (order two)
Part number
E39-F9
E39-F10
E39-F4
E39-F11
E39-L4
E39
E39
Dimensions
Unit: mm (inch)
ATTACHMENTS
E39-F1
Lens kit (pair)
E39-F2
Side-view attachment (pair)
Note: One set includes two units.
Note: One set includes two units.
E39-F3
Convergent beam conversion kit
M3 toothed
washers
Two, 4 dia.
Two, M3 x 3 Slotted
head machine screws
18
6.4
12
3.6
3
8.5
Two, 3.2
+0.2
0
dia.
8
0.2
20.7
6.4
6.5
M3 x 6 Angle
fixing screw
E39-F5
Side-view diffuse reflective conversion kit
E39-F3A
Reflective unit lens (Allen wrench included)
PROTECTIVE STAINLESS STEEL TUBES
E39-F32A, E39-F32A5
E39-F32B, E39-F32B5
Note: 1. L is as follows:
E39-F32A and E39-F32B: 1,000
E39-F32A5, E39-F32B5: 500
2. These are sold as pairs.
2
E39
E39-F2 Side View Attachment
These attachments provide 90 angle
viewing for through-beam cables. Use
then with E32-TC50, E32-TC200 and E32-
TC200C plastic filament cables and E32-
T61 glass filament cables. Screw each
piece onto the threaded tip of each
sensing head.
Note: This attachment does not increase sensing distance.
E39
E39-F3 Diffuse Reflective Conversion Bracket
This bracket converts through-beam fiber
cables for diffuse reflective sensing. Use it
with E32-TC50, E32-TC200 and E32-
TC200C plastic filament cables. A set of
E39-F1 lenses are supplied with this
conversion bracket. To install, first remove
the mounting nuts from the fiber-optic
sensing heads. Then loosen the two set
screws on the bracket. Insert the sensing
ends through the bracket, then attach the
lenses. Tighten the two set screws to hold
the sensing heads in place. Mount the
bracket at the detection site, then loosen
the large center screw to adjust the angle.
When the angle that produces reliable
detection has been found, tighten the
screw to retain that angle.
E39-F3A Reflective Unit Lens (for E32-D32 Fiber)
When E39-F3A is attached to an E32-D32
fiber, adjust the focal point so that the
amplifier will not detect its own light
reflected from inside the E39-F3A.
Place the object to be detected or while
paper at the sensing distance, then adjust
the insertion depth of the fiber into the
E39-F3A so that the light spot is as small
as possible. Then fasten the sensing head
using the Allen head wrench supplied with
the E39-F3A.
In the example shown,
A = The focus is farther than the E39-F3A
B = The focus is closer than the E39-F3A.
E39-F5 Diffuse Reflective Side View Conversion Block
This reflective side view block may be
used with E32-TC200A plastic filament
fiber-optic cable only. It provides a 2 cm
(0.79 in) sensing distance. To install, first
remove mounting nuts and washers from
fiber-optic sensing head. Then, screw the
threaded heads as far as they will go onto
the mounting holes on the narrow side of
the block.
5
京公网安备 11010802033920号
EEWORLD
