EEWORLDEEWORLDEEWORLD

Part Number

Search

OZ-SS-106DM1.200

Description
POWER/SIGNAL RELAY, SPST, MOMENTARY, 0.12A (COIL), 6VDC (COIL), 720mW (COIL), 16A (CONTACT), 110VDC (CONTACT), THROUGH HOLE-STRAIGHT MOUNT
CategoryMechanical and electronic products    relay   
File Size139KB,2 Pages
ManufacturerTE Connectivity
Websitehttp://www.te.com
Download Datasheet Parametric View All

OZ-SS-106DM1.200 Overview

POWER/SIGNAL RELAY, SPST, MOMENTARY, 0.12A (COIL), 6VDC (COIL), 720mW (COIL), 16A (CONTACT), 110VDC (CONTACT), THROUGH HOLE-STRAIGHT MOUNT

OZ-SS-106DM1.200 Parametric

Parameter NameAttribute value
MakerTE Connectivity
Reach Compliance Codeunknow
ECCN codeEAR99
body width12.8 mm
body height20.6 mm
Body length or diameter29.2 mm
Maximum coil current (DC)0.12 A
Coil operating voltage (DC)4.2 V
Coil power720 mW
Coil release voltage (DC)0.3 V
Coil resistance50 Ω
Maximum coil voltage (DC)6 V
Coil/Input Power TypeDC
Contact (AC) maximum rated R load16A@240VAC
Maximum contact current (AC)16 A
Maximum contact current (DC)16 A
Contact (DC) maximum rated R load16A@110VDC
Maximum contact voltage (AC)240 V
Maximum contact voltage (DC)110 V
Contact/Output Power TypeAC/DC
Electrical life100000 Cycle(s)
Installation featuresTHROUGH HOLE-STRAIGHT MOUNT
operating hours15 ms
Maximum operating temperature55 °C
Minimum operating temperature-30 °C
physical size29.2mm x 12.8mm x 20.6mm
GuidelineCSA; TUV; UL
Relay actionMOMENTARY
Relay functionSPST
Relay typePOWER/SIGNAL RELAY
release time8 ms
surface mountNO
Termination typeSOLDER
Catalog 1308242
Issued 3-03
OEG
OZ/OZF
series
16A Miniature
Power PC Board Relay
Appliances, HVAC, Office Machines.
UL File No. E82292
CSA File No. LR48471
TUV File No. R85447
Users should thoroughly review the technical data before selecting a product part
number. It is recommended that user also seek out the pertinent approvals files of
the agencies/laboratories and review them to ensure the product meets the
requirements for a given application.
Features
• Meet UL 508, CSA and TUV requirements.
• 1 Form A and 1 Form C contact arrangements.
• Immersion cleanable, sealed version available.
• Meet 5,000V dielectric voltage between coil and contacts.
• Meet 10,000V surge voltage between coil and contacts (1.2 / 50µs).
• Quick Connect Terminal type available (OZF).
• UL TV-8 rating available (OZT).
Coil Data @ 20°C
OZ-L Sensitive
Rated Coil
Voltage
(VDC)
5
6
9
12
24
48
Nominal
Current
(mA)
106.4
88.0
58.0
44.4
21.8
10.9
Coil
Resistance
(ohms)
±
10%
47
68
155
270
1,100
4,400
OZ-D Standard
Rated Coil
Voltage
(VDC)
5
6
9
12
24
48
Nominal
Current
(mA)
138.9
120.0
78.3
60.0
29.3
14.5
Coil
Resistance
(ohms)
±
10%
36
50
115
200
820
3,300
Must Operate
Voltage
(VDC)
3.50
4.20
6.30
8.40
16.80
33.60
Must Release
Voltage
(VDC)
0.25
0.30
0.45
0.90
1.20
2.40
Must Operate
Voltage
(VDC)
3.75
4.50
6.75
9.00
18.00
36.00
Must Release
Voltage
(VDC)
0.25
0.30
0.45
0.60
1.20
2.40
Contact Data @ 20°C
Arrangements:
1 Form A (SPST-NO) and 1 Form C (SPDT).
Material:
Ag Alloy (1 Form C) and AgSnO (1 Form A).
Max. Switching Rate:
300 ops./min. (no load).
30 ops./min. (rated load).
Expected Mechanical Life:
10 million operations (no load).
Expected Electrical Life:
100,000 operations (rated load).
Minimum Load:
100mA @ 5VDC.
Initial Contact Resistance:
100 milliohms @ 1A, 6VDC.
Contact Ratings
Ratings: OZ/OZF:
20A @ 120VAC resistive,
16A @ 240VAC resistive,
5A @ 120VAC inductive (cosø= 0.4),
5A @ 24VDC inductive ( L/R= 7msec).
OZT:
8A @ 240VAC resistive,
TV-8 @ 120VAC tungsten, 25,000ops.
Operate Data
Must Operate Voltage:
OZ-D:
70% of nominal voltage or less.
OZ-L:
75% of nominal voltage or less.
Must Release Voltage:
5% of nominal voltage or more.
Operate Time: OZ-D:
15 ms max.
OZ-L:
20 ms max.
Release Time:
8 ms max.
Max. Switched Voltage: AC:
240V.
DC:
110V.
Max. Switched Current:
16A (OZ/OZF), 8A (OZT).
Max. Switched Power:
3,850VA, 600W.
Environmental Data
Initial Dielectric Strength
Between Open Contacts:
1,000VAC 50/60 Hz. (1 minute).
Between Coil and Contacts:
5,000VAC 50/60 Hz. (1 minute).
Surge Voltage Between Coil and Contacts:
10,000V (1.2 / 50µs).
Temperature Range:
Operating: OZ-D:
-30°C to +55°C
OZ-L:
-30°C to +70
°C
Vibration, Mechanical:
10 to 55 Hz., 1.5mm double amplitude
Operational:
10 to 55 Hz., 1.5mm double amplitude.
Shock, Mechanical:
1,000m/s
2
(100G approximately).
Operational:
100m/s
2
(10G approximately).
Operating Humidity:
20 to 85% RH. (Non-condensing).
Initial Insulation Resistance
Between Mutually Insulated Elements:
1,000M ohms min. @ 500VDC.
Coil Data
Voltage:
5 to 48VDC.
Nominal Power:
720 mW (OZ-D), 540mW (OZ-L).
Coil Temperature Rise:
45°C max., at rated coil voltage.
Max. Coil Power:
130% of nominal.
Duty Cycle:
Continuous.
Mechanical Data
Termination:
Printed circuit terminals.
Enclosure (94V-0 Flammability Ratings):
OZ-S:
Vented (Flux-tight) plastic cover.
OZF-SS:
Vented (Flux-tight) plastic cover.
OZ-SH:
Sealed plastic case.
Weight:
0.46 oz (13g) approximately.
462
reference purposes only.
Dimensions are shown for
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Specifications and availability
subject to change.
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
Today at 10:00 am TI Award Live: Low-power wireless technology for building automation sensor applications
Today at 10:00 am TI Award Live: Low-power wireless technology for building automation sensor applicationsClick here to enter the live broadcastLive broadcast time: March 10, 10:00-11:30 am Live Topic...
EEWORLD社区 TI Technology Forum
For SMD components with thin pins, what should be the PCB wiring line width?
In the past, I made direct-insert PCBs. I usually set the line width of the power and ground lines to 50 mils, and the other lines to 30 mils. Now I want to make a PCB with both SMD and direct-insert ...
lcwd PCB Design
MSP430g2553 hardware UART (modification based on official routines)
At first, the UART_Keyboard of the official example program always failed to run on the computer, so I went online to learn about the specific process of UART implementation, modified the official exa...
Aguilera Microcontroller MCU
TMS320F28335 startup process
1. What is the starting address of the DSP after reset?0x3FFFC02. What are the steps for burning the program in the emulator?Burn the program to the specified location according to the cmd file, and t...
fish001 Microcontroller MCU
Tektronix Live: Senior engineers chat with you about oscilloscopes, and orders are free!
On March 25th (Wednesday) from 14:30 to 16:00,Tektronix senior engineer Lao Bai will chat with you online about oscilloscopes! Note: This live broadcast is mainly for lottery, followed by small talkPa...
eric_wang Integrated technical exchanges

Technical ResourceMore

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

Datasheet   0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Room 1530, 15th Floor, Building B, No. 18 Zhongguancun Street, Haidian District, Beijing Telephone: (010) 82350740 Postal Code: 100190
Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号