KEMET Part Number: T493D476M010AM6310
T493 HRA, Tantalum, MnO2 Tantalum, HRA, 47 uF, 20%, 10 VDC, SMD, MnO2, Molded, High Reliability, N/A, 800 mOhms, 7343,
Height Max = 3.1mm
General Information
Series:
Dielectric:
Style:
Description:
Features:
RoHS:
P
T493 HRA
MnO2 Tantalum
SMD Chip
SMD, MnO2, Molded, High
Reliability
High Reliability
No
WARNING:
Cancer
and reproductive harm -
www.p65warnings.ca.gov.
SVHC (Pb – CAS 7439-92-1)
Non-Magnetic Lead (SnPb)
No
P and R dimensions represents
the minimum solderable area of
the termination surface entirely
below cutout (if one is present).
Prop 65:
REACH:
Dimensions
Footprint
L
W
H
T
S
F
A
B
E
G
P
R
X
7343
7.3mm +/-0.3mm
4.3mm +/-0.3mm
2.8mm +/-0.3mm
0.13mm REF
1.3mm +/-0.3mm
2.4mm +/-0.1mm
3.8mm MIN
0.5mm +/-0.15mm
3.5mm REF
3.5mm REF
0.5mm MIN
1mm REF
0.1mm +/-0.1mm
Termination:
AEC-Q200:
Notes:
Specifications
Capacitance:
Capacitance Tolerance:
Voltage DC:
Temperature Range:
Rated Temperature:
Dissipation Factor:
Failure Rate:
Resistance:
Leakage Current:
Testing and Reliability:
47 uF
20%
10 VDC (85C), 6.7 VDC (125C)
-55/+125°C
85°C
6% 120Hz 25C
N/A
0.8 Ohms (100kHz 25C)
4.7 uA (5min 25°C)
10 Cycles Surge Current Testing
At -55C And +85C After Weibull
Packaging Specifications
Weight:
Packaging:
Packaging Quantity:
412.33 mg
T&R, 178mm
500
Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute - and
we specifically disclaim - any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who have the
requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by us
with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained.
Generated 4/19/2021 - a1479232-da88-4469-b53d-3dd57c002810
© 2006 - 2021 KEMET