IXD2111B171PR datasheet, PDF - EEWORLD Datasheet

Datasheet> All Categories > Power/power management> The power supply circuit> IXD2111B171PR

IXD2111B171PR: DescriptionSwitching Controller, PSSO3, SOT-89, 3 PIN; CategoryPower/power management The power supply circuit; File Size2MB，34 Pages; ManufacturerIXYS; Environmental Compliance

Download Datasheet Parametric View All

IXD2111B171PR Overview

Switching Controller, PSSO3, SOT-89, 3 PIN

IXD2111B171PR Parametric

Parameter Name	Attribute value
Is it Rohs certified?	conform to
Maker	IXYS
package instruction	,
Reach Compliance Code	compli
ECCN code	EAR99
Analog Integrated Circuits - Other Types	SWITCHING CONTROLLER
Control Technology	PULSE FREQUENCY MODULATION
Maximum input voltage	10 V
Minimum input voltage	0.9 V
Nominal input voltage	1.02 V
JESD-30 code	R-PSSO-F3
length	4.5 mm
Number of functions	1
Number of terminals	3
Maximum operating temperature	85 °C
Minimum operating temperature	-40 °C
Nominal output voltage	1.7 V
Package body material	PLASTIC/EPOXY
Package shape	RECTANGULAR
Package form	SMALL OUTLINE
Peak Reflow Temperature (Celsius)	NOT SPECIFIED
Maximum seat height	1.6 mm
surface mount	YES
Switch configuration	BOOST
Temperature level	INDUSTRIAL
Terminal form	FLAT
Terminal pitch	1.5 mm
Terminal location	SINGLE
Maximum time at peak reflow temperature	NOT SPECIFIED
width	2.5 mm

Preview

Download Datasheet

View All

IXD2110/IXD2111

Step-Up DC/DC Converter / Controller

FEATURES

Operating Input Voltage Range:

0.9V ~ 10.0V

Output Voltage Range:

1.5V~7.0V with (0.1V

increments, accuracy ±2.5%)

Maximum Oscillation Frequency:

100 kHz

(180kHz for the IXD2111)

Built-in Switching NMOSFET (A/C/E

type) or

External Transistor (B/D/F

type)

Low Operating Supply Current:

2.0µA

Small Package:

SOT-23 & SOT89 (for IXD2111

series),SOT-25, USP-6C 8-pin 2 x 3 x 0.8 mm

TDFN package

step-up operation by using only an inductor, a

capacitor, and a diode connected externally.

The IXD2110/111B, D, and F versions can be used

with an external transistor for applications requiring

larger currents.

Output voltage is internally programmed in a range

from 1.5V to 7.0V in increments of 0.1V (accuracy

± 2.5%).

Maximum oscillation frequency is set to 100 kHz for

IXD2110/111 series. (At light loads, it is set to

180 kHz for the IXD2111 series.)

Options include products equipped with a CE pin (C

and D versions) that allows the IC to be shut down,

thereby reducing supply current, and with separated

OUT

pins (E and F versions) to separate the

power supply block and the output voltage detect

block.

With the IXD2110 series, maximum duty cycle is set

to 75% (V

= 3.3 V) making it suitable for use with

large current operations. The IXD2111 series

automatically switches duty ratio between 56% &

75% (V

= 3.3 V) to drop output ripple voltage, when

it senses changes in load, It can support both large

and small currents.

The external transistor types (B/D/F types) designed

for applications, which require larger currents.

APPLICATION

Mobile phones

Cameras, VCRs

Various portable equipment

DESCRIPTION

The IXD2110/IXD2111 series is a group of PFM step-

up DC/DC converter/controller ICs, designed to

generate low supply voltage. The series is ideal for

applications where a longer battery life is needed

such as in portable communication equipment. With a

built-in 2.5

Ω

N-channel driver transistor, the

IXD2110A/C/E and IXD2111A/C/E types provide a

TYPICAL APPLICATION CIRCUIT

TYPICAL PERFORMANCE CHARACTERISTIC

Characteristics subject to change without notice

Doc. No. IXD2110_DS, Rev. N0

Recommended Resources

Lightning protection wiring for direct-match generators of 300kW and below a

Square wave oscillation generator circuit using LM359

Voltage regulator circuit with output of -15V

555 contactless timing circuit

Automatic charging and discharging circuit diagram using thyristor

555 four-digit display capacitance meter circuit

Basic Op Amp Configuration: 1.1 Op Amp Basics　　Step 1: Connecting DC Power　　Op amps must always be supplied with DC power, so it is best to configure these connections before adding any other circuit components. Figure 1 shows o...; Aguilera Analogue and Mixed Signal

EEWORLD University ----PI new product: LinkSwitch-TNZ: PI 新品：LinkSwitch-TNZ：https://training.eeworld.com.cn/course/27365...; hi5 Power technology

I need help with the schematic diagram or other information of USR-GM3P, or a communication module similar to it.: ...; 51、32小鬼 PCB Design

[FreeRTOS check-in second stop is open] Stack - the key to task switching, closing time is August 17: Activity Overview: Click here to view (including activity encouragement and activity learning content)Check-in start and end time for this site: August 15th - August 17th (3 days) Check-in tasks: 1. R...; nmg MCU

TI-PMLK Boost Experiment Board for TPS55340 and LM5122: [i=s]This post was last edited by Jacktang on 2020-4-24 22:57[/i]This LDO Experimenter Board is one of five boards that are part of the Power Management Lab Kit (PMLK). This LDO Experimenter Board has...; Jacktang Analogue and Mixed Signal

[SC8905 EVM Review] Get the Nanxin Power Board: [i=s]This post was last edited by Beifang on 2020-9-4 09:40[/i]1. Received the express delivery, Southchip power board, visited the website http://www.southchip.com/ , and saw the rich product line. B...; 北方 Domestic Chip Exchange

Shortcut: L0 L1 L2 L3 L4 L5 L6 L7 L8 L9 LA LB LC LD LE LF LG LH LI LJ LK LL LM LN LO LP LQ LR LS LT LU LV LW LX LY LZ M0 M1 M2 M3 M4 M5 M6 M7 M8 M9 MA MB MC MD ME MF MG MH MI MJ MK ML MM MN MO MP MQ MR MS MT MU MV MW MX MY MZ N0 N1 N2 N3 N4 N5 N6 N7 N8 NA NB NC ND NE NF NG NH NI NJ NK NL NM NN NO NP NQ NR NS NT NU NV NX NZ O0 O1 O2 O3 OA OB OC OD OE OF OG OH OI OJ OK OL OM ON OP OQ OR OS OT OV OX OY OZ P0 P1 P2 P3 P4 P5 P6 P7 P8 P9 PA PB PC PD PE PF PG PH PI PJ PK PL PM PN PO PP PQ PR PS PT PU PV PW PX PY PZ Q1 Q2 Q3 Q4 Q5 Q6 Q8 Q9 QA QB QC QE QF QG QH QK QL QM QP QR QS QT QV QW QX QY R0 R1 R2 R3 R4 R5 R6 R7 R8 R9 RA RB RC RD RE RF RG RH RI RJ RK RL RM RN RO RP RQ RR RS RT RU RV RW RX RY RZ

Popular Components