BU-65863G4-890K datasheet, PDF

Datasheet> All Categories > The embedded processor and controller> Microcontrollers and processors> BU-65863G4-890K

BU-65863G4-890K: DescriptionMil-Std-1553 Controller, 2 Channel(s), 0.125MBps, CMOS, CQFP80, 0.890 X 0.890 INCH, 0.130 INCH HEIGHT, CERAMIC, QFP-80; CategoryThe embedded processor and controller Microcontrollers and processors; File Size2MB，77 Pages; ManufacturerData Device Corporation

Download Datasheet Parametric View All

BU-65863G4-890K Overview

Mil-Std-1553 Controller, 2 Channel(s), 0.125MBps, CMOS, CQFP80, 0.890 X 0.890 INCH, 0.130 INCH HEIGHT, CERAMIC, QFP-80

BU-65863G4-890K Parametric

Parameter Name	Attribute value
Maker	Data Device Corporation
package instruction	QFP,
Reach Compliance Code	compli
Other features	SEATED HT-CALCULATED
Address bus width	32
boundary scan	YES
Bus compatibility	PCI
letter of agreement	MIL-STD-1553A; MIL-STD-1553B; MCAIR; STANAG-3838
Data encoding/decoding methods	BIPH-LEVEL(MANCHESTER)
Maximum data transfer rate	0.125 MBps
External data bus width	32
JESD-30 code	S-CQFP-G80
length	22.35 mm
low power mode	YES
Number of serial I/Os	2
Number of terminals	80
Maximum operating temperature	70 °C
Minimum operating temperature
Package body material	CERAMIC, METAL-SEALED COFIRED
encapsulated code	QFP
Package shape	SQUARE
Package form	FLATPACK
Maximum seat height	3.708 mm
Maximum supply voltage	5.5 V
Minimum supply voltage	4.75 V
Nominal supply voltage	5 V
surface mount	YES
technology	CMOS
Temperature level	COMMERCIAL
Terminal form	GULL WING
Terminal pitch	1.016 mm
Terminal location	QUAD
width	22.35 mm
uPs/uCs/peripheral integrated circuit type	SERIAL IO/COMMUNICATION CONTROLLER, MIL-STD-1553

Preview

Download Datasheet

View All

BU-65743/65843/65863/65864

PCI MINI-ACE

MARK3 AND

Make sure the next

Card you purchase

has...

PCI MICRO-ACE

*-TE

FEATURES

•

32-Bit/33MHz, 3.3Volt, PCI Target

Interface

•

Fully Integrated 1553A/B Notice 2,

1760, McAir, STANAG 3838 Interface

Terminal

•

All +3.3V Operation or +3.3V Logic

and +5V Transceivers

•

0.88 inch square, 80-Pin CQFP (PCI

Mini-ACE Mark3) or 0.80 inch square

324 ball BGA (PCI Micro-ACE TE)

•

Compatible with PCI Enhanced Mini-

ACE, Enhanced Mini-ACE, Mini-ACE

and ACE Generations

•

Choice of :

RT only with 4K RAM (BU-65743)

- BC/RT/MT with 4K RAM (BU-65843)

- BC/RT/MT with 64K RAM, and RAM

Parity (BU-65863, BU-65864)

•

Sleep Mode Option

•

Choice of 10, 12, 16, or 20 MHz 1553

Clock

•

Highly Autonomous BC with Built-In

Message Sequence Control:

- Frame Scheduling

- Branching

- Asynchronous Message Insertion

- General Purpose Queue

- User-defined Interrupts

•

Advanced RT Functions

- Global Circular Buffering

- Interrupt Status Queue

- 50% Circular Buffer Rollover

Interrupts

•

Selective Message Monitor or

RT/Monitor

FOR MORE INFORMATION CONTACT:

DESCRIPTION

The PCI Mini-ACE Mark3/Micro-ACE TE family of MIL-STD-1553 terminals

provides a complete interface between a 32-Bit/33Mhz 3.3V signaling PCI Bus

and a MIL-STD-1553 bus. These terminals integrate dual transceiver, protocol

logic, and 4K or 64K words of RAM, all of which can be powered from 3.3V.

With a 0.88-inch square package, the PCI Mini-ACE Mark3 is the smallest

ceramic CQFP PCI 1553 solution available. The 0.80-inch square 324 ball BGA

PCI Micro-ACE TE has an even smaller footprint, but has a more restricted

operating temperature range. Both are 100% software compatible with the

larger PCI Enhanced Mini-ACE and add TAG_CLK inputs. The TAG_CLK input

allows a software selectable external time tag clock input. Both parts are avail-

able with a choice of either 3.3V transceivers or 5V transceivers.

The PCI Micro-ACE TE has a more restricted set of options compared to the

PCI Mini-ACE Mark3. Please consult the ordering information at the rear of the

data sheet to see which options are available. In addition, the PCI Micro-ACE

TE adds RTBOOT and 1553 clock select inputs for applications which must

boot into RT mode with Busy bit set.

The PCI Mini-ACE Mark3/Micro-ACE TE is nearly 100% software compatible

with the Enhanced Mini-ACE and previous generation Mini-ACE terminals. The

PCI interface to this terminal is not 5V tolerant.

Multiprotocol support of MIL-STD-1553A/B and STANAG 3838, including

Mark3 versions incorporating McAir compatible transmitters, is provided. There

is a choice of 10, 12, 16, or 20 MHz 1553 clocks. The BC/RT/MT versions with

64K words of RAM include built-in RAM parity checking.

BC features include a built-in message sequence control engine, with a set of

20 instructions. This provides an autonomous means of implementing multi-

frame message scheduling, message retry schemes, data double buffering,

asynchronous message insertion, and reporting to the host CPU.

The PCI Mini-ACE Mark3 and Micro-ACE TE RT offer single and circular sub-

address buffering schemes, along with a global circular buffering option, 50%

rollover interrupt for circular buffers, and an interrupt status queue.

FOR MORE INFORMATION CONTACT:

Technical Support:

1-800-DDC-5757 ext. 7771

Technical Support:

1-800-DDC-5757 ext. 7771

Data Device Corporation

105 Wilbur Place

Bohemia, New York 11716

631-567-5600 Fax: 631-567-7358

www.ddc-web.com

The technology used in DDC’s Micro-ACE series of products may be

subject to one or more patents pending.

All trademarks are the property of their respective owners.

2003 Data Device Corporation

Recommended Resources

Do you know about NXP battery cell controller?

Light-controlled road construction warning light circuit 2

Collector Tuned Mutual Inductance Coupled Oscillation Circuit

Fax machine circuit diagram 2

Logic circuit made of transistors

EXB840 application circuit

Are there any FPGA weekend training courses in Xi'an?: I am in Xi'an, and now I want to learn about FPGA, but I can't learn it by myself. I wonder if there is any FPGA training~~ It would be best if it is weekend training, and I can pay in installments (I...; zhangliyuan EE_FPGA Learning Park

Shunchip RK3288 development and design: [align=left][color=#000000][font=Calibri] [b]RK3288[/b][/font][b]Baseboard[/b][b][font=Calibri]+[/font][/b][b]Core Board Design Process[/b][/color][/align] [align=left][b][font=Calibri][color=#000000]...; qq7643066 PCB Design

When an oscilloscope measures and amplifies weak signals, the waveform will fluctuate when the human body passes through the oscilloscope, amplifying circuit or signal source.: After amplifying the UV-level DC signal, it feels very susceptible to interference. Already a total of 5...; lelen375 Analog electronics

LM25119 has no output: I downloaded the schematic and PCB directly from TI's official website. I also used the official four-layer board data to make the sample. I wanted to test the sample first to see how it works, but th...; 苏正武 TI Technology Forum

The simplest sensor circuit diagram: The simplest sensor circuit needs to be plugged into the serial port of the PC to use, using the powerful functions of the computer for various applications. Its interface circuits have their own stre...; fish001 Analogue and Mixed Signal

Simulation software selection: Dear experts, I want to use software to simulate the discrete device Mosfet circuit. I don't know if there is any software that can correspond to the actual device when selecting the device, or whethe...; solitary Discrete Device

Shortcut: L0 L1 L2 L3 L4 L5 L6 L7 L8 L9 LA LB LC LD LE LF LG LH LI LJ LK LL LM LN LO LP LQ LR LS LT LU LV LW LX LY LZ M0 M1 M2 M3 M4 M5 M6 M7 M8 M9 MA MB MC MD ME MF MG MH MI MJ MK ML MM MN MO MP MQ MR MS MT MU MV MW MX MY MZ N0 N1 N2 N3 N4 N5 N6 N7 N8 NA NB NC ND NE NF NG NH NI NJ NK NL NM NN NO NP NQ NR NS NT NU NV NX NZ O0 O1 O2 O3 OA OB OC OD OE OF OG OH OI OJ OK OL OM ON OP OQ OR OS OT OV OX OY OZ P0 P1 P2 P3 P4 P5 P6 P7 P8 P9 PA PB PC PD PE PF PG PH PI PJ PK PL PM PN PO PP PQ PR PS PT PU PV PW PX PY PZ Q1 Q2 Q3 Q4 Q5 Q6 Q8 Q9 QA QB QC QE QF QG QH QK QL QM QP QR QS QT QV QW QX QY R0 R1 R2 R3 R4 R5 R6 R7 R8 R9 RA RB RC RD RE RF RG RH RI RJ RK RL RM RN RO RP RQ RR RS RT RU RV RW RX RY RZ

Popular Components