-
Myth 6: Choosing a system depends only on its pros and cons
Most robot manufacturers may consider the robot more than the performance. But assuming that once the robot is deployed, the uptime ...[Details]
-
The S band is traditionally the operating frequency range of air traffic control and surveillance systems (ATC and ATS). With the development of the 4th generation mobile communication system LTE, th...[Details]
-
Abstract: This article introduces the development process of switching power supply and its main development direction, focusing on the working principle and working process of phase-shifted sof...[Details]
-
Infrared thermal imaging technology has been used in the automotive field for a long time. In addition to routine infrared thermal imaging inspections of electrical equipment in automobile factories, ...[Details]
-
What is spectral interference? Let’s learn more about it with the editor of Spectrum Tester. Spectral line overlap interference Spectral line overlap interference refers to the interference caus...[Details]
-
China Energy Storage Network:
Guangdong has always been the vanguard, pioneer and experimental zone of reform and opening up. Since the construction of the national electricity spot market st...[Details]
-
The production of engines is a very precise process, and the production rhythm is also at a relatively high level, which requires people to use high-speed, precise and reliable control systems and equ...[Details]
-
1. Measure the crystal oscillator clock: Use a digital multimeter to measure the voltage at both ends of the crystal oscillator. If the voltage at both ends is half of the power supply voltage or one...[Details]
-
Recently, the "Gansu Province 5G Construction and Application Special Implementation Plan" (hereinafter referred to as the "Implementation Plan") was issued, focusing on 5G network construction and 5...[Details]
-
introduction
The performance and quality of LEDs have improved 10 times in the past decade, while the manufacturing cost has dropped to 1/10 of the early ones. The new breakthrough...[Details]
-
Digital temperature sensor (SWC), also known as integrated digital pulse temperature probe, is a new type of three-terminal temperature transmitter. The device adopts integrated modular design, can...[Details]
-
1. Circuit Online Testing Technology 1. Principle of online testing: The basic principle of online testing is that the tester provides input stimulus to the chip under test on the printed circuit...[Details]
-
Dear future embedded programmers, do you want to know whether you can become an excellent engineer? Do you want to know how much you know about embedded systems? Then please pay attention to the issue...[Details]
-
#include "stm32f10x.h" /*RCC clock configuration*/ void RCC_config(void) { ErrorStatus HSEStartUpStatus; /* RCC registers are set to default configuration */ RCC_DeInit(); /* Turn on external ...[Details]
-
Mouser now sells a new chip for rapid development of precision data acquisition systems
Analog Devices ADAQ7767-1 μModule DAQ Solution
November 6, 2024 –
Mouser Electron...[Details]