Please help me sir!!!
Please help me, some parts are really hard to handle
Doing proteus simulation
Requirements: Use 20Ω/30W hollow porcelain tube resistance heating, use a single-chip microcomputer ...
[i=s]This post was last edited by qwqwqw2088 on 2019-3-13 09:52[/i] [size=4] Recently, with OPPO joining the Wireless Charging Alliance, the alliance has 190+ corporate members. In terms of quantity, ...
i.MX6UL/i.MX6ULL Development FAQ
Based on Mir Electronics i.MX6UL/i.MX6ULL products
2.2 How to tailor kernel make menuconfig and add new devices?Answer: The following describes how to configure the ke...
As shown in the picture, my write fifo is written one by one intermittently, and the write enable high level is a global_clk. Can the FIFO_clk be inverted? (The picture was downloaded from the Interne...
If the mobile phone signal strength is -90dbm (medium strength), the conversion success rate = 10^-6mw (is the calculation correct?) Is the signal received by the mobile phone so small? Only 1uW...
Today, I placed an order with Jiali Chuang for 5 boards, SMT. After placing the order, I checked the results in the evening and was furious.I got an extra 44+51 yuan.
Because I believe that the big co...