TX6A
™
10Gig
™
Keyed Shielded Patch Cords
S P E C I F I C AT I O N S H E E T
specifications
Category 6A/Class E
A
, S/FTP keyed patch cords shall be constructed
of 26 AWG shielded twisted pair stranded copper cable with keyed modular plug
on one end and a non-keyed modular plug on the other end. Keyed modular
plugs shall be mechanically keyed with color-specific positive and negative
keying features to prevent unintentional mating with unlike keyed or non-keyed
jack modules. Copper conductors in patch cable shall be twisted in pairs and
separated by a quadrant separator. All four pairs shall be surrounded by a foil
shield and flame retardant jacket. Patch cord cable shall be offered in multiple
colored S/FTP cable for design flexibility with a black strain relief boot on each
modular plug. All patch cords shall be compatible with both T568A and T568B
wiring schemes. The TX6A
™
10Gig
™
Shielded Patch Cords must be installed
as part of a complete Panduit
®
TX6A
™
10Gig
™
Shielded Copper Cabling System
in order to achieve 10GBASE-T certified performance.
TX6A
™
10Gig
™
Keyed Shielded
Copper Cabling System
Mini-Com
®
TX6A
™
10Gig
™
Keyed
UShielded Jack Modules
Keyed A (black):
Keyed B (red):
Keyed C (green):
Keyed D (yellow):
Keyed E (orange):
Keyed F (blue):
Keyed G (violet):
Keyed H
(international gray):
STPK6X*BL
STPK6X*RD
STPK6X*GR
STPK6X*YL
STPK6X*OR
STPK6X*BU
STPK6X*VL
STPK6X*IG
technical information
Category 6A/
ISO 11801 Class E
A
channel performance
tested to 500MHz:
Cable diameter:
FCC and ANSI
compliance:
IEC compliance:
c(UL)US listed:
RoHs compliance:
PoE compliance:
Flammability rating:
Certified channel performance in a 4-connector configuration up to 100 meters and
exceeds the requirement of ISO 11801 Class E
A
Edition 2.1, IEEE 802.3an-2006
and ANSI/TIA-568-C.2 Category 6A standards for supporting 10GBASE-T
transmission over copper twisted pair cabling when used as part of the
Panduit
®
TX6A
™
10Gig
™
Shielded Copper Cabling System
0.230 in. (5.8mm) nominal
Meets ANSI/TIA-1096-A; contacts plated with 50 microinches of gold for
superior performance
Meets IEC 60603-7
UL 1863, CSA standard C22.2
Compliant
Meets IEEE 802.3at and IEEE 802.3af for PoE applications
CM/LSZH dual rated
Mini-Com
®
TX6A
™
10Gig
™
Keyed
UShielded Jack Modules
Keyed A (black):
Keyed B (red):
Keyed C (green):
Keyed D (yellow):
Keyed E (orange):
Keyed F (blue):
Keyed G (violet):
Keyed H
(international gray):
CJSK6X88TGBL
CJSK6X88TGRD
CJSK6X88TGGR
CJSK6X88TGYL
CJSK6X88TGOR
CJSK6X88TGBU
CJSK6X88TGVL
CJSK6X88TGIG
TX6A
™
10Gig
™
Shielded
U/FTP Copper Cable
Plenum:
Riser:
PUFP6X04**-UG
PUFR6X04**-UG
key features and benefits
Color specific keys with
positive and negative
keying features
Mechanically and visually distinguish connections to prevent unintentional
mating with unlike keyed or non-keyed modular plugs, offering network design
flexibility, versatility, accommodating discrete networks for enhanced security
100% performance tested for
Confidence that each patch cord delivers specified performance
wire map, NEXT and return loss
Centered de-embedded plug
Integral pair manager
Patented tangle-free latch
Slender strain relief boot
Flexible stranded cable
Identification
Variety of cable colors
and lengths
Robust construction
Color bands (optional)
RJ45 plug lock-in device
(optional)
Performs in center of ANSI/TIA-568-C.2 component range, ensuring interoperability
and optimum performance
Optimizes performance and consistency by reducing untwist at plug
Prevents snags and provides easy release, saving time on frequent moves, adds
and changes
Provides easy access in high-density applications
Copper cable made of 0.23 inch S/FTP stranded 26 AWG allows for high density
applications and superior panel cable management
Provides identification of performance level, length, and quality control number for
future traceability
Meets individual length and color-coding requirements for greater system flexibility
Rated to 2500 mating cycles
Snap onto cable, allowing additional color-coding options
Secures plug into jack to prevent unauthorized removal of patch cord
TX6A
™
10Gig
™
Shielded
S/FTP Copper Cable
LSZH:
LSZH:
PSL7004DG-ED
PUFL6X04WH-KD
Mini-Com
®
Angled All Metal
Shielded Modular Patch Panels
24-port, 1RU:
48-port, 2RU:
72-port, 2RU:
CPA24BLY
CPA48BLY
CPA72BLY
Mini-Com
®
Flat All Metal
Shielded Modular Patch Panels
24-port, 1RU:
48-port, 2RU:
72-port, 2RU:
Tools and Accessories
Patch cord
removal kit:
Flashlight kit:
Patch cord band:
Standard
RJ45 plug
lock-in device:
Recessed
RJ45 plug
lock-in device:
PCRT1
KPCRT-FL
PCBAND***-Q
CP24BLY
CP48BLY
CP72BLY
PSL-DCPLX^^
applications
The TX6A
™
10Gig
™
Keyed Shielded Patch Cords are a
component of the Panduit
®
TX6A
™
10Gig
™
Shielded Copper
Cabling System. Keyed connectivity enables a level of visual and
mechanical differentiation and physical layer security that
conventional cabling systems cannot provide. This end-to-end
system provides a cost-effective medium for ensuring that
network bandwidth needs are easily met today and tomorrow.
This shielded cabling system provides high performance,
excellent EMI suppression, and aids in secure data transmission.
The Panduit solution helps ensure organizations efficiently and
reliably meet their data transmission needs.
With certified performance to the ISO 11801 Class EA Edition
2.1, IEEE 802.3an-2006 and ANSI/TIA-568-C.2 Category 6A
standards, this system will support the following applications:
• Stacking switched and switch-to-switch links
• Aggregation of Gigabit Ethernet channels
• Streaming video
• Scientific modeling
• Storage area networks
• Real-time intensive financial transactions
• Animation
• Medical imaging
PSL-DCPLRX^^
w w w.pand uit.co m
*Substitute for length in feet: 3, 5, 7, 10 or 14 feet.
Contact customer service for universal reference
patch cords.
**To designate color, add suffix BU (Blue) or
WH White). For additional cable colors, contact
customer service.
***To designate color, add suffix WH (White), EI
(Electric Ivory), IG (International Gray), BL (Black), BU
(Blue), RD (Red), YL (Yellow), GR (Green), OR
(Orange), or VL (Violet) before the -Q in the part
number. 25/package.
^^For colors other than Red, add -BL (Black), -BU
(Blue), -GR (Green), -YL (Yellow), -OR (Orange), -IW
(International White) or -IG (International Gray) to the
end of the part number. 10/package. Add -C for bulk
packages of 100. Contact customer service for bulk
packaged jack modules and patch cords.
京公网安备 11010802033920号
EEWORLD
