SEALED, ILLUMINATED ROCKER SWITCHES
LOW COST, SNAP-IN ROCKER FOR WET & DUSTY ENVIRONMENTS
K1/K2
SNAP-IN
ROCKERS
The K series rockers are rugged, high performance sealed
switches designed for use under severe conditions found in marine,
appliance, heavy equipment and industrial control applications.
Sealed to IP68S with an optional panel seal available.
The K1 series is offered in single pole configuration while the K2
series is available in single and double pole configurations. Both
series offer illuminated models. Illumination can be independent
or dependent of the switch position or a combination of both. A
choice of red, green, clear or amber colored lenses are offered
in illuminated models. Illumination options include incandescent,
LED or neon light sources.
Mounting is simple and quick; snaps into panel from the front.
The OTTO snap-in design supports a variety of panel thicknesses
with just one cutout size specified.
A choice of models are offered to handle power levels to 16 amps,
1/2 HP and low level electronic switching applications.
OTTO can provide custom colors upon request. Value-added
assemblies with wire leads are also available. Please consult the
factory for assistance.
K1 Series
Single Pole
ROCKER SWITCHES
Features:
• Withstands direct water spray
• Watertight to IP68S
• Fits industry standard panel openings for drop-in
replacement of panel sealed & unsealed switches
• Snap-in feature accommodates a wide range of
panel cutouts
• Switches up to 16 amps
• UV and solvent resistant
• Withstands extreme shock & vibration
• Custom legends available
• 2 & 3-position, momentary & maintained action
• Incandescent, LED & neon illumination with
independent & dependent light source options
• UL & CSA recognized
• Ignition protected
• RoHS & WEEE compliant
ELECTRICAL RATINGS:
Load
Resistive
Resistive
Inductive
Lamp
Motor
DWV
Low Level
Electrical Life:
K2 Series
Single & Double Pole
®
Standard Characteristics/Ratings:
Sea Level @ 28VDC
or 125/250VAC, 60Hz
16A
10A
10A
5A
0.5HP
10mA @ 30mV
See Rating Chart
Cycles
25,000
50,000
25,000
25,000
25,000
1050Vrms except across light terminals
LIGHTING:
Light Source
Incandescent
Neon
LED
Mechanical Life:
Seal:
Rating
(VDC) 6V, 12V, 24V
(VAC) 125V, 250V
(VDC) 2V, 6V, 12V, 24V
100,000 cycles
IP68S
Operating Temp Range:
-30°C to +85°C
MATERIALS:
Case:
Button:
Base:
Terminals/Contact:
Terminal Hardware:
Thermoplastic
Thermoplastic
Thermoplastic
Brass, silver alloy with silver plate, gold flash for low level
Screws and lockwashers provided when applicable
K1/K2 series recommended Quick Connect terminals:
AMP 60253-2 for 12-16 AWG
AMP 42100-2 for 14-18 AWG
None provided
Mounting Hardware:
Specifications Subject To Change Without Notice
www.ottoexcellence.com
95
K2
SNAP-IN
ROCKERS
SEALED, ILLUMINATED ROCKER SWITCHES
LOW COST, SNAP-IN ROCKER FOR WET & DUSTY ENVIRONMENTS, 1 & 2 POLES
K2 PART
K2
X
X
X
Terminal Style/
Switch Rating
A.
Q.C./Std.
B.
Screw/Std.
C.
Solder/Std.
D.
Q.C./Low Level
E.
Screw/Low Level
F.
Solder/Low Level
Actuator Color/Style
A.
Red/Rocker
B.
Black/Rocker
C.
White/Rocker
D.
Red/Paddle
E.
Black/Paddle
F.
White/Paddle
G.
Red/Short Paddle Pinned
H.
Black/Short Paddle Pinned
J.
White/Short Paddle Pinned
K.
Red/Paddle Pinned Std.
L.
Black/Paddle Pinned Std.
M.
White/Paddle Pinned Std.
N.
Red/Rocker Pinned
P.
Black/Rocker Pinned
R.
White/Rocker Pinned
NOTE: For custom colors, contact factory.
Switch Action/Circuit
Position Position Position
"A"
"B"
"C"
A.
B.
C.
D.
E.
F.
G.
H.
J.
K.
L
.
M.
N.
P.
Q.
R.
S.
T.
U.
V.
ON
ON
(ON)
(ON)
(ON)
ON
(ON)
ON
ON
(ON)
(ON)
(ON)
ON
(ON)
ON
OFF
ON
OFF
ON
ON
None
None
None
None
OFF
OFF
OFF
None
None
None
None
OFF
OFF
OFF
None
None
None
None
OFF
OFF
OFF
ON
OFF
ON
(ON)
ON
ON
OFF
ON
OFF
ON
(ON)
ON
ON
(ON)
(ON)
(ON)
(ON)
(ON)
(ON)
Circuit
SPST
SPDT
SPST
SPDT
SPDT
SPDT
SPDT
DPST
DPDT
DPST
DPDT
DPDT
DPDT
DPDT
SPDT
SPST
DPDT
DPST
SPDT
DPDT
NOTE: ( ) denotes momentary action.
Position "A"
C1
Position "B"
Position "C"
C2
K2 Series
Panel cutout dimensions are for reference only. Differences in panel material
and thickness may require changes to the panel cutout for optimum fit.
Optional Panel Gasket 0.062” thickness P/N 807038-1
0.031” thickness P/N 807038-2
0.25 Quick Connect Terminals
98
OTTO Full Line Catalog
Specifications Subject To Change Without Notice
SEALED, ILLUMINATED ROCKER SWITCHES
LOW COST, SNAP-IN ROCKER FOR WET & DUSTY ENVIRONMENTS, 1 & 2 POLES
K2
SNAP-IN
ROCKERS
NUMBER CODE
X
X
X
X
X
Light Type
A.
No Light
B.
6V Incandescent
C.
12V Incandescent
D.
24V Incandescent
E.
125VAC Neon
F.
250VAC Neon
G.
2V Red LED
H.
2V Green LED
J.
2V Amber LED
K.
6V Red LED
L.
6V Green LED
M.
6V Amber LED
N.
12V Red LED
P.
12V Green LED
Q.
12V Amber LED
R.
24V Red LED
S.
24V Green LED
T.
24V Amber LED
Lens Color
Position “A”
A.
No Lens
B.
Red
C.
Green
D.
Amber
E.
Clear
Position “C”
A.
No Lens
B.
Red
C.
Green
D.
Amber
E.
Clear
Light/Circuit Location
A.
No Light
B.
F.
Legend & Orientation
A.
None
B.
C.
Dependent Light
ON in position "A"
Wired to terms
1
& 7
C.
Dependent Light
ON in position "A"
Wired to terms
1
& 7
Dependent Light
ON in position "C"
Wired to terms
2
& 8
D.
E.
G.
ROCKER SWITCHES
Dependent Light
ON in position "C"
Wired to terms
2
& 8
F.
Dependent Light
ON in position "A"
Wired to terms
1
& 7
Independent Light
at position "C"
Wired to terms 7 &
8
G.
D.
H.
J.
Independent Light
at position "A"
Wired to terms 7 &
8
H.
E.
Independent Light
ON in position "A"
Wired to terms
7
& 8
Dependent Light
ON in position "C"
Wired to terms
2
& 8
K.
L.
Independent Light
at position "C"
Wired to terms 7 &
8
NOTES:
• No momentary switches with dependent lights.
• Neon lamp only to be coded with clear or amber lenses.
• LED lenses must be clear or same color as LED.
• K2 connector P/N C801765.
• Recommended Quick Connect Terminals:
AMP 60253-2 for 12-16 AWG wire with 0.160”-0.210” insulation OD
AMP 42100-2 for 14-18 AWG wire with 0.100”-0.170” insulation OD
• K2 panel plug P/N C100695-X. Contact factory for color selection.
• No dependent light in OFF position.
• All legends printed on actuators without lens(es) will be white
except actuator codes C, F, J, M & R.
• All legends printed on lenses will be white except on clear
lens(es) will be black.
• OTTO-02 denotes Mexico manufacturing location.
J.
M.
N.
Independent Light
ON in position "A"
Wired to terms 3 &
7
Independent Light
ON in position "C"
Wired to terms 4 &
8
Not available in DPDT
P.
R.
D
= Dependent Light
I
= Independent Light
NOTES:
• LED anode (+) terminal number shown in
bold.
• Light on OFF side must be independent.
• Contact factory for multiple light types in the
same switch.
Specifications Subject To Change Without Notice
www.ottoexcellence.com
99
Domestic Chip Exchange
京公网安备 11010802033920号
EEWORLD
