BOARD/WIRE-TO-BOARD
CONNECTORS
1.25MM WIRE-TO-BOARD SYSTEM
OVERVIEW
FCI’s 1.25mm pitch wire-to-board connector series is
designed for a wide variety of applications in Industrial,
Automotive and Consumer.
The range consists of terminals, crimp housings and PCB
headers in straight and right angle, surface mount and
through mount configurations. It is a single row design,
available with from 2 to 15 circuits. A crimping application
tool is also available for wire harness assembly.
Unlike many other products for the same applications,
FCI’s 1.25mm wire-to-board range conforms to the EU
Industry Safety Standard, PCB header material meets
halogen free requirements and the products can be
operated in the temperature range from -40°C to +105°C.
FEATURES & BENEFITS
• Operating temperature: -40°C to +105°
• Plating options: Matte tin, gold flash, 15µin. gold
and 30µin.gold
• Circuits: #2~#15 positions available, extension up
20 positions
• Current rating: 1A
• Polarized Mating Geometry: crimping housing is polarized
to prevent mis-mating with PCB header
• Friction lock: crimping housing is equipped with friction
to prevent mis-mating with PCB header
• PCB header material (resin) meets halogen
free requirement
• Housing meets EU Industry Safety Standard
• RoHS compliance and UL approved
• Tape and reel packaging befits pick and place of SMT
production process
TARGET MARKETS/APPLICATIONS
• Office equipment
• Industry control
• Instrumentation/Metering
• Vending POS machine
• Small motor/Robot Control
• Security
• Car audio
• Alarm systems
• Industrial
• Consumer
1.25MM WIRE-TO-BOARD SYSTEM
TECHNICAL INFORMATION
MATERIALS
• Contact: Copper alloy
Plating: Matte tin, gold flash, 15µin. gold and 30µin. gold
over nickel
• Housing: Thermoplastic or thermoplastic
high temperature, UL94V-0
• Metal hold down: Copper alloy
Plating: Matt tin
MECHANICAL PERFORMANCE
• Mating & un-mating force: conforms to EIA-364-13
• Contact retention force: 0.5Kgf min.
• Hold down/Housing retention force: 1.0Kgf min.
• Wire retention force: 0.5Kgf min.
• Terminal/Housing retention force: 0.5Kgf min.
• Vibration: 1µs max. , EIA-364-28 Condition I
• Shock: 1µs max. , EIA-364-27A
• Durability: 30 cycles
ELECTRICAL PERFORMANCE
• Contact resistance: 20mΩ max.
• Insulation resistance: 100MΩ min.
• Voltage rating: 125V AC, DC
• Current rating: 1A (0.8A -32 AWG)
• Dielectric withstand voltage: 500V AC/minute
SPECIFICATIONS
• Product Spec.: GS-12-675
• Packaging Spec.: GS-14-1592; GS-14-1593
APPROVALS AND CERTIFICATIONS
• RoHS conforms to EU Directive 2002/95/EC
• UL approval
• Housing connector conforms to IEC 60695-2 Industry
Safety Standard (Glow Wire test)
ENVIRONMENTAL
• Resistance to reflow soldering heat:
•
Pre-heat: 150°C to 180°C, 60 - 90 seconds
•
Heat: 230°C min. , 40 seconds min.
•
Peak temperature: 260°C max. , 10 seconds max.
• Resistance to hand soldering heat:
•
Soldering iron: 350±10°C
•
Duration: 3 - 4 seconds min.
• Thermal shock (temperature cycling): conforms to
EIA-364-32A
• Humidity (temperature cycling): conforms to
EIA-361-31A
• Temperature life (heat aging):
conforms to EIA-361-17A, 105°C for 96 hours
• Salt spray: conforms to EIA-364-26B
• Solderability: solderable area to have min.
95% solder coverage
PACKAGING
• PCB Header: tape and reel
• Crimping Housing: bag
• Terminal: reel
For more information,
please contact: Communications@fci.com
or visit us at
www.fci.com
Disclaimer
Please note that the above information is subject to change without notice.
京公网安备 11010802033920号
EEWORLD
