Use 7747 to measure capacitance, the capacitance value to be tested is about 3pf.
After I2C is connected, I configured the registers of 7747 according to the sample code of 7746, but when reading the ...
Leave a commentRecommend to a friendPrintON Semiconductor's Industry's Smallest Package for Handheld Devices Low Voltage Analog SwitchesOn January 12, ON Semiconductor introduced three new low-impedan...
[i=s]This post was last edited by wintonson on 2021-1-31 15:33[/i]【 RISC-V MCU CH32V103 Review】 ---Advanced Wiki--- Writing USB files
The Advancement of Victory
January 31 , 2021Preface:
This is the e...
Serial port input and output are needed in the project. I looked through the forum and found that there was no article about configuring serial port 1, so I had to write it myself.
Just write a test p...
Generally speaking, should we install the library in the ubutu environment and then call the library of the system file in cmake, or compile the library and create a new lib under the source code and ...
According to the plan, I changed the serial port configuration this time. Open the CubeMX project file and select the serial port number output to the debugger according to the schematic diagram. It s...