DFN
Vishay Thin Film
Dual Flat No Lead Molded
Precision Thin Film Resistor, Surface Mount Network
FEATURES
•
•
•
•
•
•
•
•
•
0.8 mm lead pitch
MSL level 1 per J-STD-020
Low profile 1 mm seated height
Small size 4 mm x 4 mm size 50 % board savings
over SOIC packages
Wide resistance range 100
Ω
to 100 kΩ available
Custom configurations available
Low TCR ± 25 ppm, TCR tracking to ± 3 ppm
Ratio tolerances to ± 0.025 %
Compliant to RoHS directive 2002/95/EC
The DFN series of precision surface mount resistor networks
feature isolated thin film precision resistors mounted in a
0.8 mm pitch 4 mm x 4 mm dual flat no lead package. The
networks feature 50 % savings in board space over
traditional SOIC packages. They are ideally suited for
applications of unity gain operational amplifiers that require
close TC tracking and tight ratio tolerances over
temperature. Custom configurations are available upon
request.
TYPICAL PERFORMANCE
ABSOLUTE
TCR
25
ABSOLUTE
TOL.
0.1
TRACKING
3
RATIO
0.05
SCHEMATIC
8
7
6
5
STANDARD RESISTANCE OFFERING
(R
1
=)
500
Ω
1 kΩ
2 kΩ
4.99 kΩ
5 kΩ
10 kΩ
20 kΩ
50 kΩ
100 kΩ
R
1
R
1
R
1
R
1
1
2
3
4
Note
• Consult factory for additional R values and schematics
STANDARD ELECTRICAL SPECIFICATIONS
TEST
Material
Pin/Lead Number
Resistance Range
TCR: Absolute
TCR: Tracking
Tolerance: Absolute
Tolerance: Ratio
Power Rating: Resistor
Power Rating: Package
Stability: Absolute
Stability: Ratio
Voltage Coefficient
Working Voltage
Operating Temperature Range
Storage Temperature Range
Noise
Thermal EMF
Shelf Life Stability: Absolute
Shelf Life Stability: Ratio
SPECIFICATIONS
Passivated nichrome
8
100
Ω
to 100 kΩ per resistor
± 25 ppm/°C
± 3 ppm/°C
± 0.05 % to ± 1.0 %
± 0.025 % to ± 0.5 %
100 mW
100 mW x number of resistors
ΔR
± 0.05 %
ΔR
± 0.015 %
< 0.1 ppm/V
100 V max. not to exceed
P
x
R
- 55 °C to + 125 °C
- 55 °C to + 150 °C
< - 30 dB
< 0.08 μV/°C
ΔR
± 0.01 %
ΔR
± 0.002 %
CONDITIONS
-
-
-
- 55 °C to + 125 °C
- 55 °C to + 125 °C
+ 25 °C
+ 25 °C
Maximum at + 70 °C
Maximum at + 70 °C
2000 h at + 70 °C
2000 h at + 70 °C
-
-
-
-
-
-
1 year at + 25 °C
1 year at + 25 °C
Document Number: 60109
Revision: 25-Jan-10
For technical questions, contact:
thinfilm@vishay.com
www.vishay.com
47
DFN
Vishay Thin Film
Dual Flat No Lead Molded
Precision Thin Film Resistor, Surface Mount Network
DIMENSIONS AND IMPRINTING
in millimeters
4.000 ± 0.050
8
5
Resistance
Value Code
0.300 ± 0.050
5
6
7
8
3.500 ± 0.050
Exposed Pad
0.800 BSC
4.000 ± 0.050
DFNA
XXXX
MMYY
Date
Code
(MMYY)
4
3
2
1
2.700 ± 0.050
Exposed Pad
Pin 1 Dot
by
Marking
1
4
0.400 ± 0.050
2.400
Ref.
BOTTOM VIEW
Pin 1 Indentification
Chamfer 0.300 x 45°
(4 mm x 4 mm)
TOP VIEW
A
A
Max.
Nom.
Min.
0.900
0.850
0.800
0.000 - 0.050
SIDE VIEW
0.203 Ref.
Note
• Contact factory for package outlines for higher pin count or custom configurations
MECHANICAL SPECIFICATIONS
Resistive Element
Substrate Material
Body
Terminals
Plating
Marking Resistance to Solvents
Passivated nichrome
Silicon
Molded epoxy
Copper alloy
100 % matte tin
Per MIL-PRF-914
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: DFNA1002AT1
D
GLOBAL
MODEL
DFN
(Lead (Pb)-free)
(e3)
F
N
A
1
0
0
2
A
T
1
SCHEMATIC
A
= Isolated equal
value resistors
RESISTANCE
The first 3 digits are
significant figures and
the last digit specifies
the number of zeros to
follow.
Example:
1002 = 10 kΩ
1003 = 100 kΩ
4991 = 4.99 kΩ
TOLERANCE AND
RATIO TOLERANCE
Z
= ± 0.05 % abs. ± 0.025 ratio
(1)
A
= ± 0.1 % abs. ± 0.05 % ratio
B
= ± 0.1 % abs. ± 0.1 % ratio
C
= ± 0.25 % abs. ± 0.1 % ratio
D
= ± 0.5 % abs. ± 0.1 % ratio
F
= ± 1.0 % abs. ± 0.5 % ratio
PACKAGING
TAPE AND REEL
T0
= 100 min., 100 mult
T1
= 1000 min., 1000 mult
(2)
T3
= 300 min., 300 mult
T5
= 500 min., 500 mult
TF
= Full reel
TS
= 100 min., 1 mult
UF
= TUBED
Notes
(1)
Tolerance available on 1 kΩ and up
(2)
Preferred packaging code
www.vishay.com
48
For technical questions, contact:
thinfilm@vishay.com
Document Number: 60109
Revision: 25-Jan-10
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
京公网安备 11010802033920号
EEWORLD
