The JDSU near infrared fused coupler splits or combines light at any selected
wavelength from 700 to 1150 nm. Designed for applications in fiber laser, sensor
and avionics applications, the coupler utilizes low loss fused fiber technology. No
light leaves the fiber and therefore no alignment is required; and there are no
unwanted reflections. Furthermore the output fiber pigtails may be directly
integrated into beam delivery systems.
NORTH AMERICA
:
800 498-JDSU (5378)
WORLDWIDE
:
+800 5378-JDSU
WEBSITE
:
www.jdsu.com
FUSED COUPLER, NEAR INFRARED
2
Configuration
1x2
P1 (Red) COMMON (Input)
P2 (Blue) SIGNAL (Input)
P3 (Red) TAP (Output)
2x2
P1 (Red) COMMON (Input)
P2 (Blue) SIGNAL (Input)
P4 (Blue)
P3 (Red) TAP (Output)
Insertion Loss
Coupling Ratio
Grade
Available Housing Option
Signal Path Insertion Loss
1, 2
(Maximum)
0.9 dB
1.1 dB
1.5 dB
1.7 dB
2.2 dB
2.4 dB
3.0 dB
3.2 dB
3.8 dB
4.0 dB
Tap Path Insertion Loss
1, 2
(Maximum)
12.2 dB
12.4 dB
8.4 dB
8.6 dB
6.4 dB
6.5 dB
4.9 dB
5.1 dB
3.8 dB
4.0 dB
10%
10%
20%
20%
30%
30%
40%
40%
50%
50%
A
B
A
B
A
B
A
B
A
B
3, 4, 5, 6
3, 4, 5, 6
3, 4, 5, 6
3, 4, 5, 6
3, 4, 5, 6
3, 4, 5, 6
3, 4, 5, 6
3, 4, 5, 6
3, 4, 5, 6
3, 4, 5, 6
1. Insertion loss at operating wavelength range (not including PDL, TDL or connector losses).
2. In 2x2 couplers with a coupling ratio of 20% or lower, insertion loss is not specified for launch through second input port (P4).
FUSED COUPLER, NEAR INFRARED
3
Housing Option
Housing Code
3
4
5
6
Description
Regular
Ø 0.9 mm slim
Ø 0.9 mm semi-ruggedized
Ø 3.0 mm fully ruggedized
1x2, 2x2 Dimensions (mm)
3.0 (Ø) x 50 (L)
3.0 (Ø) x 60 (L)
5.0 (Ø) x 75 (L)
80 (L) x 10 (W) x 8 (H)
Pigtail
Primary-coated fiber
Ø 0.9 mm loose-tube
Ø 0.9 mm loose-tube
Ø 3.0 mm fan-out sleeving
Specifications
Parameter
Operating wavelength range
1
Excess loss
Return loss/Directivity
Pigtail tensile load
Optical power handling
Operating temperature range
2
Storage temperature range
Fiber type
Grade A
Grade B
Typical
Minimum
Maximum
Maximum
Any wavelength within the 700 to 1150 nm range
0.30 dB
0.50 dB
50 dB
5N
4W
-40 to 75 °C
-40 to 85 °C
Speciality fiber
1. Any specific wavelength point from within the range 633 to 850 nm may be selected. For wavelengths outside of this range, contact JDSU with specific requirements.
2. For connectorised component, operating temperature range is -5 to 75 °C.
FUSED COUPLER, NEAR INFRARED
4
Ordering Information
For more information on this or other products and their availability, please contact your local JDSU account manager or
JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at
customer.service@jdsu.com.
Sample: FFS-060K31A10 (Fused Fiber Speciality Coupler, 1060 nm, 50/50 coupling ratio, regular housing, 1x2, A grade, 1 m
pigtails, no connectors)
FFS-
Code
7
8
9
0
1
Wavelength
(First Digit)
7xx nm
8xx nm
9xx nm
10xx nm
11xx nm
Code
A
C
E
H
K
Coupling Ratio
1
10%
20%
30%
40%
50%
Code
1
2
Configuration
1x2
2x2
Code
0
1
3
5
9
A
B
Connectors
2, 4
None
FC/PC
FC/APC
SC/APC
FC/UPC
SC/UPC
LC
5
Code
A
B
Grade
Grade A
Grade B
Code
Wavelength
(Second and
Third Digit)
Examples:
33
x33 nm
32
x32 nm
57
x57 nm
Code
3
4
5
6
Housing
2
Regular
Ø 0.9 mm slim
Ø 0.9 mm
semi-ruggedised
Ø 3.0mm fully
ruggedised
Code
0
1
Pigtail Length
3
(Minimum)
0.5 meter
1 meter
1. Other coupling ratio are available. Please contact JDSU for ordering codes of coupling ratios not listed.
2. Connectors may be fitted to housing types 4, 5 and 6. For connectorisation of housing type 3, please contact JDSU sales office.
3. Minimum pigtail length. Other pigtail lengths are available on request. When the pigtail has been modified to include a
connector, pigtail length measurment includes the connector end face.
4. Excess Loss in specification table does not include connector losses.
5. LC connector is not available for housing code 6, fully ruggedised housing.
LC is a registered trademark of Lucent Technologies.
In high temperature working conditions, attention should be paid to the selection of sensor filling liquid and capillary filling liquid. The commonly used silicone oil for capillary filling liquid is ...
There are two reduction motors on McQueen to drive the wheels of the car, which can be reversed and adjusted in speed. The motor is driven by a 75V18 after an I2C to PWM chip. Because DF did not provi...
[i=s] This post was last edited by Wo Ai Download on 2021-2-6 15:41 [/i] # Music Player The ultimate trial project for this trial is a simple music player. Since the GD32E503V-Eval evaluation board ha...
Although Apple CEO Cook has been questioned by the US antitrust department, he has refused to admit that Apple has monopolistic behavior. Even if the App Store has a 30% "commission", it is considere...[Details]
Each I/O port of STM32 is controlled by 7 registers: 2 32-bit port configuration registers CRL and CRH; 2 32-bit data registers IDR and ODR; 1 32-bit set reset register BSRR; 1 16-bit reset regi...[Details]
I2C Explanation:
On the JZ2440 development board, I2C is composed of two data lines: SCL and SDA. SCL is used as the clock bus and SDA is used as the data bus. I2C devices can be mounted on th...[Details]
introduction
In recent years, with the rapid development of marine industry, marine environmental protection has been put on the agenda. Therefore, marine water environment monitoring has ...[Details]
Systems requiring advanced video graphics capabilities have always been a challenge to implement. Traditionally, these systems have required a complex combination of hardware features and software fu...[Details]
According to the "Regulations on the Administration of Imported Radio Transmitter Equipment" and the "Regulations on the Administration of Produced Radio Transmitter Equipment", in order to strengthen...[Details]
SINGAPORE - Scientists at the MIT Research and Technology Alliance have developed the world's smallest LED (light-emitting diode). The new LED could be used to build the smallest holographic microsco...[Details]
void main(void) { s1=1; TMOD=0x01; //Use mode 1 of timer T0 TH0=(65536-46083)/256; //Set the initial value of the high 8 bits of timer T0 TL0=(65536-46083)%256; //Set the initial value of...[Details]
Motors are an important and indispensable power provider in people's production and life. During use, many motors will have serious heating phenomenon, but many times we don't know how to solve it....[Details]
The success of the capacitive
sensor
scroll wheel in products such as the iPod is prompting other
consumer electronics
product developers to consider using capacitive sensors to imp...[Details]
With
the rapid development of
the power
industry, higher requirements have been placed on
the safety monitoring of
the power
system. In particular, with the expansion of the coverage ...[Details]
1. Design requirements
This power supply is used in the front end of an AC voltage conversion. The input control signal is 4VAC (50HZ AC effective value range 2VAC-8VAC), and the input power i...[Details]
AD9958 is a high-performance, dynamic and dual-channel DDS device produced by Analog Devices. Each channel can control frequency, phase/amplitude independently. This flexibility can be used to...[Details]
Constant current source circuit using operational amplifier and Darlington transistor
This circuit has a large output current because of the Darlington tube BSY86. The maximum output current is lim...[Details]
With the continuous integration of many technological breakthroughs and new streaming services, and the growing prosperity of the smart home and smart speaker markets, consumers' demand for audio i...[Details]
Industrial Control Electronics
京公网安备 11010802033920号
EEWORLD
