Requirements analysis → outline design → detailed design → debugging → testing → production conversionRequirements analysis: The first and key step in hardware design. During the requirements analysis...
This paper describes the design, fabrication, and performance of monolithic double balanced mixers designed for cellular applications at 900 and 1800 Mhz. The mixers have been fabricated using a proce...
The C2000 Piccolo series MCU chips generally integrate 1-2 hardware SCI (UART). Sometimes, due to cost or layout area considerations, only small packages or models with less resources can be selected,...
Ultrahigh frequency DC-to-DC converters using GaAs power switchesEditor's note: There are 50MHz to 250MHz switching power supplies (DC converters) abroad, which deserves the attention of the electroni...
DescriptionThe TMS320C64x+ DSPs (including the TMS320DM647/TMS320DM648 devices) are the highest performance fixed-point DSP products in the TMS320C6000 DSP platform. The DM647, DM648 devices are based...
[i=s]This post was last edited by jinglixixi on 2021-5-25 11:45[/i]When the Hummingbird soft core is already in the FPGA, the FPGA can be used as the CPU of the RISC-V core and carried out secondary d...