-
Due to insufficient IO ports, it is necessary to reuse JTAG as an IO port and retain the SWD function to debug the program. The settings are as follows: GPIO_PinRemapConfig(GPIO_Remap_SWJ_JTAGD...[Details]
-
How the system works
The system testing platform is based on AT91SAM9261s. The various characteristics of this ARM9 chip ensure the reliability and real-time performance of the entire ECG system.
...[Details]
-
Digital voltmeter (digital panel meter) is a basic measuring tool widely used in the current electronics, electrical engineering, instrumentation, metering and measurement fields. Books and applicatio...[Details]
-
It is reported that Apple is negotiating to purchase part of Japan Display's (JDI) Hakusan factory in Ishikawa Prefecture for US$200 million. At the same time, Apple may continue to use LCD screens i...[Details]
-
The 6% Luer taper connector multifunctional tester uses a 7-inch colorful LCD touch screen with Chinese menu display. The nominal capacity of the syringe can be selected by the keyboard, and the axia...[Details]
-
Abstract: In combination with the problems existing in the actual application of oil pipelines, a kind of oil pipeline monitoring system is studied and designed by analyzing the commonly used oil p...[Details]
-
Mobile device users are increasingly demanding a broadband experience with faster data rates. This demand continues to drive manufacturers to develop new technologies, such as multiple-input multiple-...[Details]
-
(1) First, we need to find out the leakage points of the device, analyze their leakage direction, pressure and other factors, and draw a distribution map of the probe positions. According to...[Details]
-
Photodiodes convert a fundamental physical phenomenon (light) into an electrical form (current). Design engineers systematically convert the photodetector current into a usable voltage, making the pr...[Details]
-
Clock cycle: The computer works in a beat mode under the action of the clock signal. Therefore, there must be a clock generating circuit. The period of the clock signal input to the microprocessor is...[Details]
-
Energy saving is the theme of power supply development. How to improve the design efficiency of power supply is the direction that power supply engineers have been working hard for. IIC-China 2011 ...[Details]
-
As a midstream enterprise in the new energy vehicle industry chain, CATL is enjoying dividends from the downstream. Last night, CATL released its 2020 report card. According to the financial r...[Details]
-
Honeycomb cobalt-free battery 10th in September, 9th in October. This is the ranking of installed capacity of power batteries of Honeycomb Energy in the past two months. According to the plan of Ya...[Details]
-
.unsigned char const chardot_5x8 = {
{0x00,0x00,0x00,0x00,0x00},/* CHAR_20 */
{0x00,0x00,0x5F,0x00,0x00},/*! CHAR_21 */
{0x00,0x07,0x00,0x07,0x00},/*" CHAR_22 */
{0x14,0x7F,0x14,0x7F,0x14},/*# C...[Details]
-
introduction
As an important device in the field of industrial automation, the IO communication and signal settings of ABB robots are the key to realize data exchange and control bet...[Details]
TI Technology Forum
京公网安备 11010802033920号
EEWORLD