Type C Coaxial Switches
This RLC Electronics' Mid-Size Coaxial Switch is a single pole,
two position type providing extremely high reliability, long life
and excellent electrical performance characteristics over the
frequency range of DC-18.0 GHz. The package utilizes high
density packaging techniques, hence the overall volume of
the switch is less than 3 cubic inches.
Specifications
S
1
-2C
2-3-4-5-6-7
Switch Type
Frequency Range
Insertion Loss (Max dB)
VSWR (Max)
Isolation (dB Min)
DC-4.0
0.2
1.2
80
SINGLE POLE TWO POSITION
DC-18GHz
4.0-12.4
0.3
1.3
70
12.4-18.0
0.4
1.5
60
Power Rating, RF Cold Switching:
See page 5.
Impedance:
50 Ohms/75 Ohms*
Operating Power 25°C:
(Failsafe):
12Vdc at 250 ma nom.
28Vdc at 140 ma nom.
115 Vac at 50 ma nom.
(Latching):
12 Vdc at 120 ma nom. 28 Vdc at
60 ma nom. 115 Vac at 50 ma nom.Current applied
10 ms min.cutthroat circuitry(standard),
recovery time 100 ms nom.
Connectors, RF:
SMA, TNC, BNC *Female
Connectors, Power:
Feed through solder lugs.
Life:
1,000,000 operations.
Switching Time:
15 mS Max.
Weight:
5 oz.
Environmental Conditions:
MIL-S-3928
Operating Mode:
Manual, failsafe or latching.
Switching Sequence:
Break before make.
*BNC not recommended for use above 1GHz.
*TNC not recommended for use above 12.4 GHz.
*75 ohm up to 3 GHz.
To designate the switch desired use:
(1) “M” for Manual, “R” for Remote.
(2) “C” for outboard mountings or “Cin” for inboard mountings.
(3) “B” for BNC, “T” for TNC or “R” for SMA connector types
(4) “A” for 115 Vac, “D” for 28 Vdc or “H” for 12 Vdc.
(5) “I” for indicators if desired.
(6) “L” for latching cutthroat if desired.
(7) “TL” for TTL Driver if desired
Example: SR-2C-R-D is a remote, outboard mounting, SMA Connectors, 28 Vdc; without indicators,
Failsafe switch 50 ohms for 75 ohms SR75-2C
Outline Drawing
RLC ELECTRONICS, INC.
83 Radio Circle, Mount Kisco, New York 10549 • Telephone: 914-241-1334 • Fax: 914-241-1753
e-mail: sales@rlcelectronics.com • www.rlcelectronics.com
11