Superior Jitter Performance (less than 0.25 ps RMS,
12 kHz - 20 MHz)
SAW replacement - better performance
Frequencies from 150 MHz to 1.4 GHz
QiK Chip™
Product Description
The 210x series of oscillators are 5x7 mm oscillators designed with the QiK Chip
TM
technology. The QiK Chip
TM
technology was specifically designed for crystal based oscillators to provide low jitter performance (as low as
0.25 ps RMS) and a wide range of frequency support (150.00 MHz to 1.4 GHz) and provides a breakthrough in
lean manufacturing enabling product to be provided in less than 2 weeks. The M210x provides design engi-
neers with the stability needed in their advanced applications and supports the need for parts to be supplied
quickly so that the rest of their circuit design can be solidified.
Product Applications
Telecommunications such as SONET / SDH /
DWDM / FEC / SERDES / OC-3 thru OC-192
1-2-4-10 Gigabit Fibre Channel
Wireless Base Stations / WLAN / Gigabit Ethernet
Avionic Flight Controls
Military Communications
Clock and Data Recovery
SD/HD Video
FPGA/ASIC Clock Generation
Test and Measurement Equipment
Product Ordering Information
M2100Sxxx, M2101Sxxx, M2102Sxxx & M2103Sxxx -
Contact factory for datasheets.
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
Revision: 8-22-08
M210x Series
5x7 mm, 3.3/2.5/1.8 Volt, LVPECL/LVDS/CML,
Clock Oscillator
Performance Characteristics
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
2
M210x Series
Phase Noise Plot
5x7 mm, 3.3/2.5/1.8 Volt, LVPECL/LVDS/CML,
Clock Oscillator
Output Waveform
Output Waveform: LVDS/CML/PECL
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
3
M210x Series
5x7 mm, 3.3/2.5/1.8 Volt, LVPECL/LVDS/CML,
Clock Oscillator
Product Dimension & Pinout Information
6 Pad Standard Option
9 Pad Option
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
4
M210x Series
5x7 mm, 3.3/2.5/1.8 Volt, LVPECL/LVDS/CML,
Clock Oscillator
Handling Information
Although protection circuitry has been designed into the M210x oscillator, proper precautions should be taken to
avoid exposure to electrostatic discharge (ESD) during handling and mounting. MtronPTI utilizes a human-body
model (HBM) and a charged-device model (CDM) for ESD-susceptibility testing and protection design evaluation.
ESD voltage thresholds are dependent on the circuit parameters used to define the mode. Although no industry-
wide standard has been adopted for the CDM, a standard HBM (resistance = 1500
Ω,
capacitance = 100 pF) is
widely used and therefore can be used for comparison purposes. The HBM ESD threshold presented here was
obtained using these circuit parameters.
Quality Parameters
Part Marking Guide
Line 1: Model Number
Line 2: Frequency
Line 3: Date Code
Line 4: Pin 1 Indicator / MtronPTI
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
EFM32PG22 Development Kit
The PG22 Development Kit is a low-cost, small-footprint prototyping and development platform for the EFM32PG22 microcontroller. The board is a cost-effective, feature-rich, s...
1: I received the board a day or two ago. Due to the epidemic, I haven't started testing and familiarizing myself with it. Today, I have time to install the development environment and write a post.
F...
[i=s]This post was last edited by damiaa on 2019-1-2 11:32[/i] [NXP Rapid IoT Review] + Two web-based IDEs with the same function: NXP Rapid IoT & atmosphereiot [color=#ff00][size=14px]A closer look r...
[i=s]This post was last edited by qwqwqw2088 on 2021-4-15 09:10[/i]The wearable patient monitor market is growing rapidly. Remote patient monitors help doctors monitor patients in real time, which for...
[i=s]This post was last edited by cheney03 on 2021-4-20 11:34[/i]The project needs to use the AD9106 chip, but now I have encountered some problems.
First, let me explain my needs. I need to generate ...
Hello everyone! The following are the development board drawings of the LC0 series, which can be used for development and debugging, and as a reference for hardware minimum system design.Welcome to do...
//************************************************************************ //* Using I2C Master Mode for access Slave (EEPRM) //* //* Written by: Richard Yang ...[Details]
555 touch timer switch circuit diagram
Integrated circuit IC1 is a 555 timing circuit, which is connected here as a monostable circuit. Usually, since there is no induced voltage at the touch sheet...[Details]
Previously, Huawei Mate 20/Mate 20 Pro series mobile phones received the EMUI 9.1.0.123 update push, which added Moon Mode, GPU Turbo 3.0, Ark Compiler, and Super File System (EROFS) technology...[Details]
Recently, the 100MW/200MWh energy storage demonstration project in Jinzhai County, Anhui Province was officially started. This project is the first 100MW-level centralized shared energy storage pow...[Details]
Atmel Corporation announced that ASUS has selected Atmel's recently released mXT2952T and mXT1664T controllers to power the touchscreens of several new tablets and Ultrabooks, including the latest Ze...[Details]
The first step is to configure the UART GPIO port
void UART1_GPIO_Configuration(void)
{
GPIO_InitTypeDef GPIO_InitStructure;
// Configure USART1_Tx as alternate push-pull
GPIO_InitSt...[Details]
Lu Weibing, Vice President of Xiaomi Group and General Manager of Redmi Brand, announced that "big" news will be released at 10 am today, so please stay tuned. The tail of Lu Weibing's Weibo ...[Details]
Limited by technology, the current conversion efficiency of LED is still about 20%, which means that up to 80% of the electrical energy will be converted into heat energy. Therefore, heat dissi...[Details]
On July 25, the opening ceremony of Ruineng Wen Semiconductor and Ruineng Jinshan Module Factory was held grandly in the Shanghai Bay Area High-tech Zone, marking the official operation of Ruineng...[Details]
More than a year after Apple announced its transition to its own chips, Microsoft quietly released a new version of its Microsoft Teams optimized for Apple Silicon. It is reported that Microsoft ha...[Details]
Jiwei.com reported that since 2020, driven by emerging applications such as 5G, intelligence, and new infrastructure, the semiconductor industry has continued to grow in prosperity, the demand for pa...[Details]
The method of using a multimeter to determine whether a single-phase or three-phase motor is burned out is only applicable to small motors with a DC resistance of coil windings above 1 ohm. The metho...[Details]
1MAX7534 Introduction
MAX7534 is a 14-bit D/A chip, and its pinout is shown in Figure 1. It uses a 20-pin DIP package; is powered by a single 12-15V power supply; outputs current signals; ...[Details]
When I first came into contact with STM32, I used 8M crystal oscillators. For example, if you want to change the external crystal oscillator to 12M, but still want to use 72M as the main frequency, h...[Details]
In battery-powered applications such as motor drives and switch mode power supplies (SMPS), the power architecture usually requires the ability to disconnect the module from the main power rai...[Details]
Development Kits Review Area
京公网安备 11010802033920号
EEWORLD
