The JDSU near infrared fused coupler splits or combines light at any selected
wavelength from 700 to 1150 nm. Designed for applications in fiber laser, sensor
and avionics applications, the coupler utilizes low loss fused fiber technology. No
light leaves the fiber and therefore no alignment is required; and there are no
unwanted reflections. Furthermore the output fiber pigtails may be directly
integrated into beam delivery systems.
NORTH AMERICA
:
800 498-JDSU (5378)
WORLDWIDE
:
+800 5378-JDSU
WEBSITE
:
www.jdsu.com
FUSED COUPLER, NEAR INFRARED
2
Configuration
1x2
P1 (Red) COMMON (Input)
P2 (Blue) SIGNAL (Input)
P3 (Red) TAP (Output)
2x2
P1 (Red) COMMON (Input)
P2 (Blue) SIGNAL (Input)
P4 (Blue)
P3 (Red) TAP (Output)
Insertion Loss
Coupling Ratio
Grade
Available Housing Option
Signal Path Insertion Loss
1, 2
(Maximum)
0.9 dB
1.1 dB
1.5 dB
1.7 dB
2.2 dB
2.4 dB
3.0 dB
3.2 dB
3.8 dB
4.0 dB
Tap Path Insertion Loss
1, 2
(Maximum)
12.2 dB
12.4 dB
8.4 dB
8.6 dB
6.4 dB
6.5 dB
4.9 dB
5.1 dB
3.8 dB
4.0 dB
10%
10%
20%
20%
30%
30%
40%
40%
50%
50%
A
B
A
B
A
B
A
B
A
B
3, 4, 5, 6
3, 4, 5, 6
3, 4, 5, 6
3, 4, 5, 6
3, 4, 5, 6
3, 4, 5, 6
3, 4, 5, 6
3, 4, 5, 6
3, 4, 5, 6
3, 4, 5, 6
1. Insertion loss at operating wavelength range (not including PDL, TDL or connector losses).
2. In 2x2 couplers with a coupling ratio of 20% or lower, insertion loss is not specified for launch through second input port (P4).
FUSED COUPLER, NEAR INFRARED
3
Housing Option
Housing Code
3
4
5
6
Description
Regular
Ø 0.9 mm slim
Ø 0.9 mm semi-ruggedized
Ø 3.0 mm fully ruggedized
1x2, 2x2 Dimensions (mm)
3.0 (Ø) x 50 (L)
3.0 (Ø) x 60 (L)
5.0 (Ø) x 75 (L)
80 (L) x 10 (W) x 8 (H)
Pigtail
Primary-coated fiber
Ø 0.9 mm loose-tube
Ø 0.9 mm loose-tube
Ø 3.0 mm fan-out sleeving
Specifications
Parameter
Operating wavelength range
1
Excess loss
Return loss/Directivity
Pigtail tensile load
Optical power handling
Operating temperature range
2
Storage temperature range
Fiber type
Grade A
Grade B
Typical
Minimum
Maximum
Maximum
Any wavelength within the 700 to 1150 nm range
0.30 dB
0.50 dB
50 dB
5N
4W
-40 to 75 °C
-40 to 85 °C
Speciality fiber
1. Any specific wavelength point from within the range 633 to 850 nm may be selected. For wavelengths outside of this range, contact JDSU with specific requirements.
2. For connectorised component, operating temperature range is -5 to 75 °C.
FUSED COUPLER, NEAR INFRARED
4
Ordering Information
For more information on this or other products and their availability, please contact your local JDSU account manager or
JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at
customer.service@jdsu.com.
Sample: FFS-060K31A10 (Fused Fiber Speciality Coupler, 1060 nm, 50/50 coupling ratio, regular housing, 1x2, A grade, 1 m
pigtails, no connectors)
FFS-
Code
7
8
9
0
1
Wavelength
(First Digit)
7xx nm
8xx nm
9xx nm
10xx nm
11xx nm
Code
A
C
E
H
K
Coupling Ratio
1
10%
20%
30%
40%
50%
Code
1
2
Configuration
1x2
2x2
Code
0
1
3
5
9
A
B
Connectors
2, 4
None
FC/PC
FC/APC
SC/APC
FC/UPC
SC/UPC
LC
5
Code
A
B
Grade
Grade A
Grade B
Code
Wavelength
(Second and
Third Digit)
Examples:
33
x33 nm
32
x32 nm
57
x57 nm
Code
3
4
5
6
Housing
2
Regular
Ø 0.9 mm slim
Ø 0.9 mm
semi-ruggedised
Ø 3.0mm fully
ruggedised
Code
0
1
Pigtail Length
3
(Minimum)
0.5 meter
1 meter
1. Other coupling ratio are available. Please contact JDSU for ordering codes of coupling ratios not listed.
2. Connectors may be fitted to housing types 4, 5 and 6. For connectorisation of housing type 3, please contact JDSU sales office.
3. Minimum pigtail length. Other pigtail lengths are available on request. When the pigtail has been modified to include a
connector, pigtail length measurment includes the connector end face.
4. Excess Loss in specification table does not include connector losses.
5. LC connector is not available for housing code 6, fully ruggedised housing.
LC is a registered trademark of Lucent Technologies.
Recently I have seen some products that can swipe cards directly on the top of the screen. Aren't the bottoms of normal 5/7 inch screens made of metal? How can they swipe IC cards? Please give me some...
In this circuit, the antenna (spring) is connected to the base of the first transistor. When we place the antenna near an object excited by AC current, a small current is induced into the antenna due ...
Definition of freewheeling diodeA freewheeling diode is a diode that plays a freewheeling role in a circuit. For example, an ordinary diode 1N4007, if you use it in a circuit to play a freewheeling ro...
Challenges that 5G brings to the design of base station RF PA:
On the one hand, the linearization of PA is becoming increasingly difficult;
On the other hand, the requirements for PA efficiency are ge...
0 Introduction
Electrolytic capacitors are a type of capacitor, with metal foil as the positive electrode, the metal oxide film in close contact with the positive electrode as the dielectric, ...[Details]
Based on: linux-3.6.9, 128M Nand, busybox-1.20.2
The ubi command comes from busbox.
As follows:
flash_eraseall /dev/mtd1
ubiattach /dev/ubi_ctrl -m 1
ubimkvol /dev/ubi0 -s 104857600 -N...[Details]
Governments and power companies expect photovoltaic (PV) power to account for a large proportion of the total energy they supply. Converting the direct current from solar cells into alternating cur...[Details]
(Reporter Ma Jia) On April 14, State Grid Corporation of China held a video conference to start the construction of new energy vehicle charging facilities projects in 2020, to thoroughly implement ...[Details]
According to a report by foreign media insideevs on December 25, IBM is currently developing a new battery that does not require the use of heavy metals such as nickel or cobalt. The cost will be low...[Details]
1. Structure and working principle of P0 port
The structure of one of the 8 bits of port P0 is shown in the figure below:
As can be seen from the figure above, the P0 port is composed of a...[Details]
In addition to precision, the robot's line-finding walking also requires a significantly higher speed, and speed often becomes the key to winning certain competitions. In the National College Studen...[Details]
Engine test items and common equipment
Engine testing involves many items, such as torque (force), speed, pressure, temperature, flow, flow velocity, noise, position and displacement, etc., an...[Details]
Why doesn't Huawei hire a foreign CEO? Ren Zhengfei said that first, foreign employees must have this ability; second, foreign employees must work at Huawei for 25 years, rising from the grassroots l...[Details]
At present, stm32 is very popular, so this article discusses the low power mode of stm32. Let's go to the manual first! This is an English document that is not easy to understand, right? Let's look...[Details]
Forklift mobile (AGV/AMR) is to load various guidance technologies on the forklift, build a map, and use obstacle avoidance safety technology to realize unmanned operation of the forklift.
▲...[Details]
IT Home reported on June 18 that Qualcomm released the Snapdragon 690 processor yesterday, which will bring support for 5G networks to low-priced smartphones. It uses the ARM Cortex-A77 core and...[Details]
With the development of science and technology, computers have become an indispensable supporting environment for fault diagnosis equipment. We can use its rich software and hardware resources to i...[Details]
Influence of measured fluid characteristics: Due to the nature of natural gas itself, it will undergo complex changes with the change of external ambient temperature, thus affecting the measurement ac...[Details]
RF/Wirelessly
京公网安备 11010802033920号
EEWORLD
