The Ortel PONA 2100 Series Erbium Doped Fiber Amplifier (EDFA)
is an ideal building block for OEM system integrators. The family of
PONA 2100 series EDFAs is designed to meet the most demanding
noise performance requirements of CATV applications, and
performs all the functions required of an optical amplifier for system
integration. PONA 2100 series EDFAs provide optical isolation on
the input and output of the gain block for stable, low noise operation.
The input and output optical signal power levels are detected for
monitoring and control. The input optical signal is amplified with
active gain control for a constant output power level, or with active
output power control for constant gain mode.
The PONA 2100
series EDFAs also provide monitors and associated alarms for all
vital characteristics. The optical output of the PONA 2100 series
EDFAs can be split into multiple ports by an optional external
splitter.
For more information on this and other products:
Contact Sales at Ortel 626-293-3400, or visit www.ortel.com.
PONA 2100 Series EDFA
Rev B
DATA SHEET
|
FEBRUARY 2006
Optical / Electrical Characteristics
PROPERTY
Product Code
PERFORMANCE
Operating Input Power
Operating Input Power
Output Power
Noise Figure
(Note 2)
Pin
(dBm)
Pin
(dBm)
Po(dBm)
NF (dB)
NF (dB)
NF (dB)
Static Gain Flatness
Dynamic Gain Flatness
(Note 4)
GF (dB)
(dB)
(dB)
(dB)
Output Power Stability
Power Consumption
(steady state regime)
Notes
:
1.
2.
3.
4.
5.
(dB)
Psys(W)
Typ/Max
Typ/Max
Typ/Max
Max
Max
Max
Max
Max
Max
Max
Min
12
-10
14
+/-.25
4.5/5.0
4.0/4.5
4.0/4.5
+/-0.5
+/-1.0
+/-0.5
+/-0.5
+/- 0.1
5
12
-10
17
+/- .25
4.5/5.0
4.0/4.5
4.0/4.5
+/-0.5
+/-1.25
+/-0.5
+/-0.5
+/- 0.1
7
12
-10
20
+/- .25
4.5/5.0
4.0/4.5
4.0/4.5
+/-0.5
+/-1.5
+/-1.0
+/-1.0
+/- 0.1
9
12
-10
22
+/- .25
4.5/5.0
4.0/4.5
4.0/4.5
+/-0.5
+/-2.0
+/-1.0
+/-1.0
+/- 0.1
12
12
-10
24
+/- .25
5.0/5.5
4.5/5.0
4.5/5.0
+/-0.5
+/-2.0
+/-1.0
+/-1.0
+/- 0.1
20
12
-10
26
+/- .25
5.0/5.5
4.5/5.0
N/A
+/-0.5
+/-2.0
N/A
N/A
+/- 0.1
27
12
-10
27
+/- .25
5.0/5.5
4.5/5.0
N/A
+/-0.5
+/-2.0
N/A
N/A
+/- 0.1
32
Nominal
-00 and -01 versions
-02 version
-03 version
(Note 3)
-00 and -02 versions
-01 version
-03 version
(Note 5)
50 C Case
o
UNIT
LIMIT
2114
2117
PONA MODELS
2120
2122
2124
2126
2127
COMMENTS
(note 1)
Unless stated otherwise all specifications apply over the full temperature range and humidity
Measured with 8 evenly spread signals @ 25°C,
Σ
Pin = 0 dBm.
Measured with a swept Probe Signal (Pp), where Pp = 0 dBm @ 25°C
Measured with a swept Probe Signal (Pp), and a fixed Tone Signal (Pt) @ 1545 nm; (Pt = Pp+20 dB; Pt + Pp = 0 dBm) @ 25°C; Gain
Flattened Option with
∆G
= +/-0.5dB is available for some Models
Stability over polarization and temperature
General and Mechanical Specifications
PROPERTY
GENERAL
Operating Wavelength
Operating Case Temperature
Storage Temperature
Operating Humidity
Voltage Supply Range
Optical Connectors
Dimensions In Inches
REQUIREMENT
1530 ~ 1562nm
0°C to 50°C
-40°C to 85°C
20% to 85%
85 VAC to 265 VAC 50/60 Hz
-36 to –60 V DC
SC/APC; SC/UPC; FC/APC;
FC/UPC; E2000/APC
19.0”W x 14.76”D x 1.72”H
Non-condensing
Standard
Optional
User Specified
19’’ Rack Mounted, 1U
Standard
COMMENTS
Ortel, a division of EMCORE
2 of 4
PONA 2100 Series EDFA
Rev B
DATA SHEET
|
FEBRUARY 2006
Outline Drawing
AC and DC versions shown below with 8-port option
DC Version
AC Version
Ortel, a division of EMCORE
3 of 4
PONA 2100 Series EDFA
Rev B
DATA SHEET
|
FEBRUARY 2006
Compliance Information
89/336/EEC Electromagnetic Compatibility Directive, amended by 92/31/EEC & 93/68/EEC
73/23/EEC Low Voltage Directive, amended by 93/68/EEC
EN 50083-2, (2001)
Cable networks for TV signals, sounds and interactive services, Part 2 Electromagnetic
Compatibility for equipment.
EN 55013
EN 61000-3-2
EN 55020
EN 61000-4-6
EN 61000-4-3
EN 61000-4-2
EN 61000-4-4
EN 60950
EN 60825-1
EN 60825-2
CDRH
Mains Conducted Emissions
Mains Frequency and its Harmonics, Conducted Emissions
Radiation from Active Equipment, Radiated Immunity
Immunity of Active Equipment, Radiated Immunity
Immunity of Active Equipment, Radiated Immunity
Electrostatic Discharge Immunity
Electrical Fast Transient / Burst Immunity
Low Voltage Directives
Laser Safety Requirement
Laser Safety Requirement
Laser Safety Requirement
Ordering Information
PONA21
-
-
-
-
Optical
Output
Power
14
- 14 dBm
17
- 17 dBm
20
- 20 dBm
22
- 22 dBm
24
- 24 dBm
26
- 26 dBm
27
- 27 dBm
Output
Ports
1
2
4
8
Input Voltage
AC
– 90-260V 50/60 Hz
DC
– - 48 V
SC
FC
EC
TC
GC
Connector
-
-
-
-
-
SC/APC
FC/APC
E2000/APC
SC/UPC
FC/UPC
GFF/ NF options
00 - Standard
01 - Standard with Gain Flattened option
02 - Standard with Low NF option
03 - Low NF and Gain Flattened
Note: The maximum number of output ports when using E2000 connectors is four. All other optical connectors allow for
the eight ports option
Example:
PONA2120-2-AC-SC-00:
Standard 20 dBm EDFA with AC Power Supply, two (2) optical outputs, and SC/APC optical connectors
Information contained herein is deemed to be reliable and accurate as of issue date. EMCORE reserves the right to change the design or specifications of
the product at any time without notice. Ortel, the Ortel logo, EMCORE, and the EMCORE logo are trademarks of EMCORE Corporation.
During these years of work and study, everyone must have accumulated a lot of development boards and interesting "toys"!Is there anything that has been idle for a long time and you plan to “cut off, g...
[i=s]This post was last edited by wsmysyn on 2019-6-1 19:33[/i] [b]Background:[/b] I have paid attention to this news before. At that time, it was under construction and I passed by it once. Yesterday...
Today at 10:00 AM, live broadcast with awards: Internet of Everything - Shijian Company and Microchip experts jointly discuss IoT solutionsClick here to enter the live broadcastLive broadcast time: 10...
Recently, Rongbai Technology announced that the company, Rongbai Group, Xiantao Municipal Government, Hanyang District Government of Wuhan City, and Yangtze River Industrial Investment Management Co....[Details]
On June 16, the Meizu 17 series ushered in the second round of media firmware updates, bringing the previously announced "full-scene video stabilization technology". This time, main camera, ul...[Details]
Through the Modbus to Ethernet/IP gateway module (XD-MDEP100), interconnection between different protocols can be achieved, making data exchange between devices more convenient and efficient. As a ...[Details]
The application circuit for realizing 2n times positive voltage output by cascading method is shown in FIG5 .
In the circuit of Figure 5, when the switch k is set to "1", the output voltage v...[Details]
Recently, HoloMatic announced that new senior vice president and partner Jiang Jingfang has joined the team. Jiang had previously worked at Bosch. He joined the Bosch Group in 2000 and was sent to th...[Details]
The difference between interrupts and exceptions: interrupts are from the outside to the inside, while exceptions are from the inside.
1. Memory format (word alignment):
The Arm architecture tre...[Details]
First Look at Bitcoin Hangzhou, the glittering city on the West Lake, is located in China's "Yangtze River Delta Economic Zone". Its private economy has always been relatively developed, and it has a...[Details]
I bought a few LED bulb kits on Taobao some time ago , and planned to try making a few LED lights myself . Here is the tutorial for making the LED bulbs. LED Bulb Kit (The lamp beads I bought...[Details]
The topic is as follows Control the LCD display screen through the serial port assistant, display it through LCD1602 and save it in EEPROM to save the data when it is powered off (for example: the se...[Details]
What is Automotive Radar
Automotive radar is the core sensor of the driver assistance system (detection distance, speed). The long-range radar (LRR) is used to realize automatic cruise control...[Details]
It has been 4 years since I first came into contact with microcontrollers. During this period, I learned and used 51 microcontrollers, Freescale microcontrollers, LPC2138, PIC16F887 and other series ...[Details]
The Ministry of Industry and Information Technology released a list of new energy vehicle models exempted from vehicle purchase tax that will be revoked, showing that after the 19th and 20th batches ...[Details]
Measuring power supply ripple accurately is an art in itself. In the example shown in Figure 6.1, a junior engineer used an oscilloscope all wrong. His first mistake was using an oscilloscope probe w...[Details]
The main control uses STM8 single-chip microcomputer, and the measurement uses Kelvin connection method. The measurement accuracy is closely related to the accuracy of the resistors used in the syste...[Details]
With
the rapid transformation of
the automotive industry
towards
intelligence
and electrification,
autonomous driving
technology has become an important direction for future ...[Details]
Buy&Sell
京公网安备 11010802033920号
EEWORLD
