S Series
Slide Switches
Features/Benefits
•
6 to 15 AMPS
•
Enclosed housing
•
PC and Snap-in panel mounting
•
Reversing option
•
RoHS compliant
Typical Applications
•
Portable tools
•
Small appliances
•
Floor care products
Models Available
Specifications
Materials
HOUSING: 6/6 nylon (UL94V-2), black.
TOP PLATE: 6/6 nylon (UL94V-2), black.
ACTUATOR: 6/6 nylon (UL94V-2), black (standard).
CONTACTS: Q contact material: Copper, silver plated. See page
I-31 for additional contact materials.
TERMINALS: Q contact material: Copper, silver plated. See page
I-31 for additional contact materials.
CONTACT SPRING: Music wire or stainless steel.
TERMINAL SEAL: Epoxy.
NOTE:
Any models supplied with Q, B or G contact material are RoHS compliant.
NOTE:
Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
I
Slide
CONTACT RATING: Q contact material (S1XX, S2XX Models):
6 AMPS @ 125 V AC; 6 AMPS @ 250 V AC; 1 AMP @
125 V DC (UL/CSA). (S5XX, S6XX Models): 12 AMPS @
125 V AC; 6 AMPS @ 250 V AC; 1 AMP @ 125 V DC (UL/CSA).
(S7XX, S8XX Models): 15 AMPS @ 125 V AC; 6AMPS @
250 V AC (UL/CSA). See page J-31 for additional ratings.
ELECTRICAL LIFE: 10,000 make-and-break cycles at full load.
CONTACT RESISTANCE: Below 10 m
Ω
typ. initial
@ 2-4 V DC, 100 mA, for both silver and gold plated contacts.
INSULATION RESISTANCE: 109
Ω
min.
DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level.
OPERATING TEMPERATURE: -30ºC to +65ºC
STORAGE TEMPERATURE: -30ºC to +85ºC
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages I–29 through I–32. For additional options not shown in catalog, consult Customer Service Center.
Switch Function
S101
SPST, 6 AMPS
S202
(DPDT, 6 AMPS
S802
DPDT, 15 AMPS
S102
SPDT, 6AMPS
S112
SPDT, mom., 6 AMPS
S201
DPST, 6 AMPS
S602
DPDT, 12 AMPS
S701
SPST, 15 AMPS
S702
SPDT, 15 AMPS
Actuator
03
.335" high
04
.500" high
09
.250" high
12
Screwdriver slot
(with marking)
13
Screwdriver slot
(without marking)
C2
Black cap
C3
Red cap
C5
Yellow cap
Detent
1
With detent
2
Without detent
Mounting Style
SS
Panel with mounting ears
MS
PC thru-hole
S2
Snap-in panel with blacktop plate
TS
Panel with mounting ears
Terminations
03
Solder lug with hole
02
PC Thru-hole
04
PC Thru-hole
07
Quick connect
08
PC Thru-hole
WC
Wire lead
Housing Markings
NONE
No markings
D
ON-OFF
L
ON
M
ON-OFF
N
Red rectangle on one end
Contact Material
Q
Silver
B
Gold
G
Gold over silver
Seal
NONE
No seal
E
Epoxy seal
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
I–28
www.ck-components.com
S Series
Slide Switches
SWITCH FUNCTION
NO.
POLES
MODEL
NO.
AMP
RATING
SWITCH
FUNCTION
AVAILABLE
MOUNTING
STYLES
NO.
POLES
MODEL
NO.
AMP
RATING
6
SWITCH
FUNCTION
DPST
AVAILABLE
MOUNTING
STYLES
MS,SS,TS
SCHEMATIC
SCHEMATIC
S101
S102
SP
6
SPST
SS
S201
6
SPDT
MS,SS
S202
S112
S701
S702
6
SPDT-MOM.
MS,SS
DP
6
DPDT
MS,SS, TS
15
SPST
S1,S2,S3,ST
S602
12
DPDT
MS,SS, TS
15
SPDT
S1,S2,S3,ST
I
S802
15
DPDT
S1,S2,S3,ST
Slide
SPST
DPDT
Part number shown: S101031SS03Q
Part number shown: S202031SS03Q
NOTE:
and MOM. in table indicates momentary action.
All models
with all options when ordered with ‘G’ or ‘Q’ contact material.
Contacts make on side actuator thrown.
ACTUATOR
03
.335" HIGH
04
.500" HIGH
09
.250" HIGH
12
SCREWDRIVER SLOT
(WITH MARKING)
13
SCREWDRIVER SLOT
(WITHOUT MARKING)
NOTE:
Standard actuator color is black, other colors available, consult Customer Service Center. Alternate heights
are available with ‘03, 04 and 09’ actuators, consult Customer Service Center. Models with S2 mounting style,
subtract .090 (2, 29). Actuators ‘12’ and ‘13’ are available with DPST and DPDT models only.
White 115-230 markings (std.).
Without markings.
C2; C3; C5
SNAP-ON CAP
OPTION
CODE2
C1-CT CAP
COLOR
BLACK
RED
YELLOW
NOTE:
Actuator finish: matte.
If no color is specified, black will be
supplied. Colored actuator caps may
also be ordered separately and user
installed, see page I-32.
C2
C3
C5
Available with S2 mounting
style only.
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
I–29
www.ck-components.com
S Series
Slide Switches
DETENT
1
2
WITH DETENT
Standard with all maintained models: S101, S102, S201, S202, S602, S701, S702, and S802.
WITHOUT DETENT
Standard with all momentary models: S112.
MOUNTING STYLE
SS
PANEL WITH MOUNTING EARS
I
Slide
PANEL MOUNTING
AVAILABLE WITH:
Models:
S101, S102, S112,
S201, S202 and S602
Terminations:
All except 08
Actuators:
03, 04, 09, 12*
and 13*.
*12 and 13 actuators not
available with S1XX models.
S202031SS03Q
DPDT
MS
PC THRU-HOLE
AVAILABLE WITH:
Models: S101, S102, S112,
S201, S202, S602
Terminations:
02, 04 and 08
Actuators:
03, 04, 09, 12* and 13*
*12 and 13 actuators available with
S201, S202 and S602 models only.
PC MOUNTING
S202031MS02Q
For mounting information, see
TERMINATIONS section, page I-31.
DPDT
S2
SNAP-IN PANEL
PANEL MOUNTING
S802C21S207Q
DPDT
PANEL THICKNESS:
.020(0,57)–.200(5,08)
AVAILABLE WITH:
Models:
S701, S702,
and S802
Terminations:
04, 07, 57 and WC
Actuators:
C2, C3, C5 and 03
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
I–30
www.ck-components.com
S Series
Slide Switches
MOUNTING STYLE
TS
PANEL WITH MOUNTING EARS
PANEL MOUNTING
S202031TS03Q
DPDT
AVAILABLE WITH:
Models:
S201, S202, and S602
Terminations:
All
Actuators:
03, 04 and 12.
I
Slide
TERMINATIONS
03
SOLDER LUG WITH HOLE
02
PC THRU-HOLE
04
PC THRU-HOLE
PC MOUNTING
02 & 04 terminations
Recommended with ‘MS’
mounting style only.
Recommended with double pole
models only.
07
QUICK CONNECT
08
PC THRU-HOLE
.113 ± .015
(2,87 ± 0,38)
.118 ± .015
(3,00 ± 0,38)
WC
WIRE LEAD
08 terminations
with MS mounting style.
.503 ± .015
(12,78 ± 0,38)
.140
(3,56)
.368 ± .015
(9,35 ± 0,38)
MS mounting style only.
NOTE:
All terminals on S1XX, S2XX and S6XX models are .020 (0,51) thick;
all terminals on S7XX and S8XX models are .031 (0,79) thick.
18 AWG wire for S1XX and S2XX models.
16 AWG wire for all other models. Black
wire standard, other colors and lengths
available, consult Customer Service Center.
UL style 1015.
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
I–31
www.ck-components.com
S Series
Slide Switches
TOP PLATE MARKINGS
NONE
NO MARKINGS
D
ON-OFF
L
ON
M
ON-OFF
N
RED RECTANGLE ON ONE END
I
Slide
NOTE:
Top plate markings are available with ‘S2’ mounting style only. The marking color
on all top plates with marking options ‘D, L and M’ is white, standard. (except white top plates: marking
color is black, standard). The marking color on all top plates with ‘N’ marking option is red, standard.
Other marking colors are available, consult Customer Service Center.
Note:
Orientation of
actuator markings
and terminals.
CONTACT MATERIAL
OPTION
CODE
CONTACT
MATERIAL
RATINGS
S1XX, S2XX MODELS: 6 AMPS @ 125 V AC; 6 AMPS @ 250 V AC;
1 AMP @ 125 V DC (UL/CSA).
S6XX MODELS: 12 AMPS @ 125 V AC; 6 AMPS @ 250 V AC;
1 AMP @ 125 V DC (UL/CSA).
S7XX, S8XX MODELS: 15 AMPS @ 125 V AC; 6 AMPS @
250 V AC (UL/CSA).
0.4 VA MAX. @20 V AC OR DC max.
S1XX, S2XX MODELS: 0.4 VA MAX. @ 20 V AC OR DC MAX. OR
6 AMPS @ 125 V AC; 6 AMPS @ 250 V AC; 1 AMP @ 125 V DC
(UL/CSA).
S6XX MODELS: 0.4 VA MAX. @ 20 V AC OR DC MAX. OR
12 AMPS @ 125 V AC; 6 AMPS @ 250 V AC; 1 AMP @ 125 V DC
(UL/CSA).
S7XX, S8XX MODELS: 0.4 VA MAX. @ 20 V AC OR DC MAX. OR
15 AMPS @ 125 V AC; 6 AMPS @ 250 V AC (UL/CSA).
Q
SILVER
2
POWER
B
GOLD
1
LOW LEVEL/DRY CIRCUIT
G
GOLD OVER
SILVER
3
LOW LEVEL/DRY
CIRCUIT OR POWER
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
1
2
3
CONTACTS & TERMINALS: Copper, with gold plate over nickel plate.
CONTACTS & TERMINALS: Copper, silver plated (standard with all termination options).
CONTACTS & TERMINALS: Copper, with gold plate over nickel plate over silver plate.
NOTE:
Any models supplied with Q, B or G contact material are RoHS compliant.
All models
with all options when ordered with ‘G’ or ‘Q’ contact material.
NOTE:
‘G’ contact material is equivalent to both ‘B’ and ‘Q’ contact materials.
SEAL
NONE
NO SEAL
E
EPOXY SEAL
EPOXY
.075 MAX.
(1,91)
AVAILABLE HARDWARE
Cap, C2; C3 actuators
Cap, 03 actuator
PART NO.
PART NO.
WHITE
BLACK
RED
121160100
121160200
121160300
121000101
121000102
121000103
WHITE
BLACK
RED
Material: 6/6 Nylon
Finish: Matte
Material: 6/6 Nylon
Finish: Gloss
NOTE:
Other cap colors available, consult Customer Service Center.
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
I–32
www.ck-components.com
Analog electronics
京公网安备 11010802033920号
EEWORLD
