[i=s]This post was last edited by Aguilera on 2019-7-21 22:38[/i]Most conducted EMI problems are caused by common-mode noise. And, most common-mode noise problems are caused by parasitic capacitance i...
[color=#333333]Using lm2596 to stabilize 5V, why is the power supply voltage pulled down from 12V to more than 3V? The small light bulb cannot light up and cannot output 5V[/color]...
Recently, I have seen many students asking how to learn single-chip microcomputers. From my learning experience, single-chip microcomputers are mainly about practice. When the teacher set up the labor...
The Web2.0 trend has led to the rise of a large number of small and medium-sized websites, but it has also caused them great troubles. Because of the sharp increase in website traffic and the unpreced...
[i=s]This post was last edited by tinnu on 2019-6-23 23:39[/i]1. Introduction
The development of the water level measurement voice alarm device is based on the GigaDevice GD32E231C-START evaluation bo...
Delay and interrupt errors are common problems encountered by MCU novices in the process of MCU development and application. This article summarizes the common delay and interrupt problems and solutio...