MAAPGM0064
Amplifier, Power, 2W
7.1—8.5 GHz
Features
♦
♦
♦
♦
2 Watt Saturated Output Power Level
Variable Drain Voltage (6-10V) Operation
High Performance Ceramic Bolt Down Package
RoHS Compliant
M/A-COM Products
Rev A-2
Primary Applications
♦
♦
♦
Multiple Band Point-to-Point Radio
SatCom
ISM Band
APGM0064
YWWXXX
Description
The
MAAPGM0064
is a 2-stage 2W power amplifier with on-chip bias networks in a bolt down ceramic package,
allowing easy assembly. This product is fully matched to 50 ohms on both the input and output. It can be used as a
power amplifier stage or as a driver stage in high power applications.
Each device is 100% RF tested to ensure performance compliance. The part is fabricated using M/A-COM’s GaAs
Multifunction Self-Aligned Gate Process.
Ordering Information
Description
Part Number
Ceramic Package
MAAPGM0064
Die
MAAPGM0064-DIE
Sample Board (DIE)
MAAP-000064-SMB004
Electrical Characteristics: T
C
=40°C
1
, Z
0
=50Ω, V
DD
=8V, I
DQ
=600 mA
2
, P
in
=18 dBm, R
G
=120Ω
Parameter
Bandwidth
Output Power, f=8 GHz
Power Added Efficiency
1-dB Compression Point
Small Signal Gain, f=7.1-7.9 GHz
Small Signal Gain, f=7.7-8.5 GHz
Input VSWR
Output VSWR
Large Signal Gate Supply Current
Large Signal Drain Supply Current
Noise Figure
2
nd
Harmonic
Output Third Order Intercept
3
rd
Order Intermodulation Distortion,
Single Carrier Level = 20 dBm
Symbol
f
POUT
PAE
P1dB
G
G
VSWR
VSWR
I
GG
I
DD
NF
2f
OTOI
IM3
17.0
17.5
Minimum
7.1
32
33
30
32
19
19.5
1.8:1
3.0:1
5
900
9.5
-20
41
48
10
1100
mA
mA
dB
dBc
dBm
dBc
2.6:1
Typical
Maximum
8.5
Units
GHz
dBm
%
dBm
dB
dB
1
1. T
C
= Case Temperature.
2. Adjust V
GG
between –2.7 to-1.2 to achieve indicated I
DQ
.
ADVANCED:
Data Sheets contain information regarding a product M/A-COM is considering for
•
North America
Tel: 800.366.2266 / Fax: 978.366.2266
development. Performance is based on target specifications, simulated results, and/or prototype
•
Europe
Tel: 44.1908.574.200 / Fax: 44.1908.574.300
measurements. Commitment to develop is not guaranteed.
•
Asia/Pacific
Tel: 81.44.844.8296 / Fax: 81.44.844.8298
PRELIMINARY:
Data Sheets contain information regarding a product M/A-COM has under develop-
Visit www.macom.com for additional data sheets and product information.
ment. Performance is based on engineering tests. Specifications are typical. Mechanical outline has
been fixed. Engineering samples and/or test data may be available. Commitment to produce in
M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or
volume is not guaranteed.
information contained herein without notice.
MAAPGM0064
Amplifier, Power, 2W
7.1—8.5 GHz
Maximum Ratings
3
Parameter
Input Power
Drain Supply Voltage
Gate Supply Voltage
Quiescent Drain Current (No RF, 40% Idss)
Quiescent DC Power Dissipated (No RF)
Storage Temperature
Symbol
P
IN
V
DD
V
GG
I
DQ
P
DISS
T
STG
Absolute Maximum
23.0
+12.0
-3.0
950
7.9
-55 to +150
Units
dBm
V
V
mA
W
°C
M/A-COM Products
Rev A-2
3. Operation beyond these limits may result in permanent damage to the part.
Recommended Operating Conditions
4
Characteristic
Drain Supply Voltage
Gate Supply Voltage
Input Power
Thermal Resistance
Package Case Temperature
Symbol
V
DD
V
GG
P
IN
Θ
JC
T
C
Min
6.0
-2.7
Typ
8.0
-2.0
18.0
12.4
Note 5
Max
10.0
-1.2
21.0
Unit
V
V
dBm
°C/W
°C
4. Operation outside of these ranges may reduce product reliability.
5. Maximum Package Case Temperature = 170°C -Θ
JC
* V
DD
* I
DQ
Operating Instructions
This device is static sensitive. Please handle with care. To operate the device,
follow these steps.
1.
2.
3.
4.
Apply V
GG
= -2.7 V, V
DD
= 0 V.
Ramp V
DD
to desired voltage, typically 8 V.
Adjust V
GG
to set I
DQ
, (approxmately @ –2.0V).
Set RF input.
2
ADVANCED:
Data Sheets contain information regarding a product M/A-COM is considering for
•
North America
Tel: 800.366.2266 / Fax: 978.366.2266
development. Performance is based on target specifications, simulated results, and/or prototype
•
Europe
Tel: 44.1908.574.200 / Fax: 44.1908.574.300
measurements. Commitment to develop is not guaranteed.
•
Asia/Pacific
Tel: 81.44.844.8296 / Fax: 81.44.844.8298
PRELIMINARY:
Data Sheets contain information regarding a product M/A-COM has under develop-
Visit www.macom.com for additional data sheets and product information.
ment. Performance is based on engineering tests. Specifications are typical. Mechanical outline has
been fixed. Engineering samples and/or test data may be available. Commitment to produce in
M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or
volume is not guaranteed.
information contained herein without notice.
MAAPGM0064
Amplifier, Power, 2W
7.1—8.5 GHz
50
50
M/A-COM Products
Rev A-2
40
35
40
40
30
25
20
15
10
5
0
6.0
6.5
7.0
7.5
8.0
Frequency (GHz)
Figure 1. Output Power and Power Added Efficiency vs. Frequency
at V
DD
= 8V and P
IN
= 18 dBm
8.5
9.0
9.5
0
10.0
POUT (dBm)
P1dB (dBm)
30
POUT
20
PAE
30
PAE (%)
VDD = 4V
VDD = 8V
VDD = 6V
VDD = 10V
20
10
10
0
6.0
6.5
7.0
7.5
8.0
Frequency (GHz)
Figure 2. 1dB Compression Point vs. Drain Voltage
8.5
9.0
9.5
10.0
40
35
1.2
1.0
30
25
20
15
10
5
0
-4
-2
0
2
4
6
8
PIN (dBm)
Figure 3. Output Power vs. Input Power
at V
DD
= 8V
10
12
14
16
18
20
6.5 GHz
8.0 GHz
9.5 GHz
0.8
IDS (A)
POUT (dBm)
0.6
0.4
6.5 GHz
8.0 GHz
0.2
9.5 GHz
0.0
-4
-2
0
2
4
6
8
PIN (dBm)
Figure 4. Drain Current vs. Input Power
at V
DD
= 8V
45
POUT
PAE
40
35
30
10
12
14
16
18
20
50
30
Gain (dB)
Input VSWR
Output VSWR
6
40
25
5
POUT (dBm)
Gain (dB)
20
20
15
10
5
PAE (%)
25
15
3
10
2
10
5
0
4.0
5.0
6.0
7.0
Drain Voltage (V)
Figure 5. Saturated Output Power and Power Added Efficiency vs. Drain Voltage
at f
o
= 8 GHz
8.0
9.0
0
10.0
6.0
6.5
7.0
7.5
8.0
Frequency (GHz)
8.5
9.0
9.5
1
10.0
Figure 6. Small Signal Gain and VSWR vs. Frequency at VDD = 8V.
3
ADVANCED:
Data Sheets contain information regarding a product M/A-COM is considering for
•
North America
Tel: 800.366.2266 / Fax: 978.366.2266
development. Performance is based on target specifications, simulated results, and/or prototype
•
Europe
Tel: 44.1908.574.200 / Fax: 44.1908.574.300
measurements. Commitment to develop is not guaranteed.
•
Asia/Pacific
Tel: 81.44.844.8296 / Fax: 81.44.844.8298
PRELIMINARY:
Data Sheets contain information regarding a product M/A-COM has under develop-
Visit www.macom.com for additional data sheets and product information.
ment. Performance is based on engineering tests. Specifications are typical. Mechanical outline has
been fixed. Engineering samples and/or test data may be available. Commitment to produce in
M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or
volume is not guaranteed.
information contained herein without notice.
VSWR
30
20
4
MAAPGM0064
Amplifier, Power, 2W
7.1—8.5 GHz
M/A-COM Products
Rev A-2
Figure 7. CR-15 Package Dimensions
The CR-15 is a high frequency, low thermal resistance package. The package consists of a
cofired ceramic construction with a copper-tungsten base and iron-nickel-cobalt leads. The finish
consists of electrolytic gold over nickel plate.
4
ADVANCED:
Data Sheets contain information regarding a product M/A-COM is considering for
•
North America
Tel: 800.366.2266 / Fax: 978.366.2266
development. Performance is based on target specifications, simulated results, and/or prototype
•
Europe
Tel: 44.1908.574.200 / Fax: 44.1908.574.300
measurements. Commitment to develop is not guaranteed.
•
Asia/Pacific
Tel: 81.44.844.8296 / Fax: 81.44.844.8298
PRELIMINARY:
Data Sheets contain information regarding a product M/A-COM has under develop-
Visit www.macom.com for additional data sheets and product information.
ment. Performance is based on engineering tests. Specifications are typical. Mechanical outline has
been fixed. Engineering samples and/or test data may be available. Commitment to produce in
M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or
volume is not guaranteed.
information contained herein without notice.
MAAPGM0064
Amplifier, Power, 2W
7.1—8.5 GHz
120Ω
V
GG
0.1
μF
0.1
μF
V
DD
M/A-COM Products
Rev A-2
100 pF
100 pF
APGM0064
YWWXXX
RF
IN
RF
OUT
100 pF
100 pF
Pin Number
1
2
3
4
5
6
RF Designator
No Connection
V
GG
RF IN
V
GG
No Connection
No Connection
V
DD
RF OUT
V
DD
No Connection
Figure 8. Recommended Bias Configuration
7
8
9
10
Assembly Instructions:
This flange mount style package provides a robust interface between a highly integrated GaAs MMIC device and a circuit board
which may be assembled using conventional surface mount techniques. A thin shim made of a thermally and electrically
conductive, ductile material should be used prior to installation of the CR-15 to improve the thermal and electrical performance of
the package to housing interface. Refer to
M/A-COM Application Note #M567*
for more information .
For applications where surface mount components are to be installed after the CR-15 installation, this package will not be
damaged when subjected to typical convection or IR oven reflow profiles. Refer to
M/A-COM Application Note #M538*
for
maximum allowable reflow time and temperature. Alternatively, the package leads may be individually soldered. Whether an iron
or hot gas soldering equipment is used, care should be taken to insure that the temperature is well controlled and electric static
discharge (ESD) safe.
*Application Notes can be found by going to http://www.macom.com/Application%20Notes/default.asp
and searching for the required Application Note.
Biasing Notes:
♦
The 100pF bypass capacitors must be placed as close to the V
GG
and V
DD
♦
5
pins as possible
(recommended < 100 mils).
A negative bias must be applied to V
GG
before applying a positive bias to V
DD
to prevent damage to the amplifier.
ADVANCED:
Data Sheets contain information regarding a product M/A-COM is considering for
•
North America
Tel: 800.366.2266 / Fax: 978.366.2266
development. Performance is based on target specifications, simulated results, and/or prototype
•
Europe
Tel: 44.1908.574.200 / Fax: 44.1908.574.300
measurements. Commitment to develop is not guaranteed.
•
Asia/Pacific
Tel: 81.44.844.8296 / Fax: 81.44.844.8298
PRELIMINARY:
Data Sheets contain information regarding a product M/A-COM has under develop-
Visit www.macom.com for additional data sheets and product information.
ment. Performance is based on engineering tests. Specifications are typical. Mechanical outline has
been fixed. Engineering samples and/or test data may be available. Commitment to produce in
M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or
volume is not guaranteed.
information contained herein without notice.
京公网安备 11010802033920号
EEWORLD
